Used Weeke Bp 100 for sale (69)

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Bedpozuhbiofx Amredh • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Bsdpfx Amjx Ey H Isrsdh

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Bjdpewuz Dgefx Amrodh Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, Year of construction: 2011, CNC – Throughfeed Machining Center Manufacturer: Weeke Type: Optimat BHX 500 Year of manufacture: 2011 Technical data Working area X: 2500 mm Working area Y: 1300 mm Max. workpiece thickness Z: 80 mm Number of milling spindles: 2 Milling spindle power: 6 kW each Milling spindle speed: up to 18,000 rpm Tool holder: ETP 25 Total number of drilling spindles: 84 Vertical drills, top: 32 Horizontal drills, top X: 8 Horizontal drills, top Y: 2 Vertical drills, bottom: 32 Horizontal drills, bottom X: 8 Horizontal drills, bottom Y: 2 Dado cutter unit: 2 Dado cutters: adjustable 0 / 90 degrees, top and bottom Dado cutter speed: 7,500 rpm Control system: PowerControl Bdsdezzzfbjpfx Amreh Software: woodWOP Number of axes: 3 Total connection: approx. 20 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 Bjdpfsziapbox Amrsdh No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Max. panel length: 2500 mm No of injectors: 12 Bjdpoyl Ihxsfx Amrsdh

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 8 Positioning of Units by NC: yes Bdjdpfx Amszmmt Isreh Lateral horizontal groups: yes

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Bodjznbgrjpfx Amrodh Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Bsdpfxszmtl Rs Amrsdh Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-12-2554, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 80 mm, controller model: PC 85, TECHNICAL DETAILS Bdsdpoydnu Nefx Amroh Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: excellent (used), Numerical Control Type Power Control PC85T Bdedpfezrd Sfox Amrsh Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) Bsdox Aqi Eepfx Amrodh N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Bjdpfxjyyvtto Amrjdh Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Bdjdpfsx S Hzlex Amrjh Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Bdjdpowuclxsfx Amrsh Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Bodpfjw Idb Hsx Amredh Total number of drilling spindles: 19

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 4,300 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Travel range X-axis: 2,500 mm Travel range Y-axis: 4,300 mm Maximum workpiece clearance: 60 mm Spindle speed, milling unit 1: 24,000 rpm Spindle speed, milling unit 2: 24,000 rpm Spindle speed, milling unit 3: 24,000 rpm Number of controlled axes, milling unit 1: 4 Number of controlled axes, milling unit 2: 3 Number of controlled axes, milling unit 3: 3 MACHINE DETAILS Number of work zones: 2 Number of grippers: 9+4 Motor power, milling unit 1: 12 kW Motor power, milling unit 2: 12 kW Motor power, milling unit 3: 12 kW Tool magazine 1: 14 positions, located on the side of the machine Tool magazine 2: 14 positions, located on the side of the machine Bdodpfexw Ugdox Amrjh EQUIPMENT Grippers for holding the workpiece Automatic panel loading system Motorized transfer Automatic tool changer Printer for barcode labels CE marking Machine-mounted safety fences Note: Tools and the automatic chip extraction system are not included in the offer.

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Bdodpfxeum H Ekj Amrjh Total number of tool changer positions: 13

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,550 mm, feed rate X-axis: 96 m/min, feed rate Y-axis: 96 m/min, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,700 mm Travel Y-axis: 1,550 mm Stroke X-axis: 4,538 mm Stroke Y-axis: 1,952 mm Maximum workpiece clearance: 100 mm Movement speed X-axis: 96 m/min Movement speed Y-axis: 96 m/min Movement speed Z-axis: 25 m/min Number of controlled axes: 3 axes Number of drilling spindles: 7 Number of tool positions: 8 Nesting Table Length: 1,550 mm Width: 3,700 mm Material: Bakelite Number of pumps: 4 Individual capacity: 108 m³/h Drilling Unit Bdodpfx Ajxw Up Semreh Unit: top Spindles for vertical drilling: 7 Milling Unit Unit: top Number of controlled axes: 3 automatic tool changer: yes Motor power: 9 kW Max. speed: 24,000 rpm MACHINE DETAILS Installed total power: 26 kW EQUIPMENT Vacuum pump Control system PC85 Software WoodWOP CE marking Safety light curtains Note: Tools are not included in the offer.

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Bdodpfxot Hmt Ie Amreh

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts Bdjdpfx Ameyv Ev Ajreh No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Bodpfx Ajyzy T Tomrjdh Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84 Bjdpfx Ajwuckhjmrsdh

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Bdsdpfxou Rv Ukj Amreh Max. panel length: 1000 mm No of Bottom Units: 3

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Bdsdpfx Aoiwptuomreh Max. panel length: 2500 mm No of injectors: 14