Used Water Varnish for sale (7,567)

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Kodpfx Afjxzqulsfjnf Frequency: 50 Hz Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: Ksdpjxzprcjfx Affsnf ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, cooling capacity: 300 kW (407.89 HP), type of input current: AC, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 8 bar, pump pressure: 3 bar, total width: 2,257 mm, total length: 9,003 mm, total height: 1,559 mm, control cabinet height: 1,559 mm, Equipment: cooling unit, We are dismounting a Steam methane Reformer plant for hydrogen. In this case we have one Kelvion Adiabetic Air Cooler - Cooling Water. Technical information in the documents attached. Knsdpfx Aexg Ncreffsf

Condition: used, Year of construction: 2016, cooling capacity: 301 kW (409.25 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, volume flow: 359 m³/h, total width: 1,420 mm, total length: 5,400 mm, total height: 2,300 mm, Equipment: compressor, Industrial chiller for technology water GWK Sklc 260.1 Gas: R134a Knjdpfsx Dddrsx Affof Year: 2016 Capacity: 301 kW Circular pump is not included.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Ice water facility L 100 model Recommended batch size up to: 30 liters Continuous output * (cooling output): 60 liters Knodpfjfmcikex Affof Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Energy consumption at 100 liters: 1-2 KWh NEW device with warranty * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Option: Underframe Visit us at the Milbrandt outlet shop

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Kedjx Da Tijpfx Affenf Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Base construction: mounted on stainless steel frame Kjdpfx Asxzqt Isffjnf Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: good (used), Legionella Water Tester Knedpjb A Sh Tefx Affsf -With documents in English -Dimensions: 480/380/H180 mm -Weight: 3.2 kg

Condition: excellent (used), Riedel Riedel Industrial Chiller / Chiller – Type SC 101.2M4LE.l For sale is a professional Riedel chiller from the SC series, type SC 101.2M4LE.l. This unit was previously used in an industrial environment and is suitable for reliable process cooling—for example, for lasers, CNC machines, printing presses, plastics processing, or any application requiring consistently temperature-controlled cooling water. Ksdpfx Afjxyxtyefsnf The unit has had only around 25 hours of operation and is therefore in excellent condition. This chiller is air-cooled and uses refrigerant R134a. Technical specifications: Model: Riedel SC 101.2M4LE.l Cooling capacity: approx. 10–11 kW Cooling medium: Water / Water-glycol mixture Refrigerant: R134a Operating voltage: 400V / 3~ / 50 Hz Integrated circulation pump and stainless steel tank Air-cooled with large axial fan (top-mounted) Microprocessor control with temperature display Pressure gauge on the front Compact, service-friendly design Dimensions: 540 mm (width) × 1048 mm (height) × 700 mm (depth) Weight: 159.5 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Cooling water pump Make of Grundfos Type SK 4 15 / 5 2840 RPM. Flow rate 40-80 litres Pumping height 27-18 metres Ksdpoc Unydefx Affonf

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TEG301P3-20 - 2200405054, cooling capacity: 58.4 kW (79.40 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,063 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 9.94 m³/h, pump pressure: 3.14 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,172 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller / air-cooled water chiller set Manufacturer: MTA S.p.A. Model: TAE G 301 P3-20 – R454B The TAE G 301 P3-20 units are air-cooled compact water chillers suitable for outdoor installation down to -20°C. Features include crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, integrated P3 circulation pump, and winter package (condenser pressure control). Cooling capacity: 58.4 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 9.94 Available pump pressure (bar): 3.14 Ambient temperature (°C): 32 Refrigerant: R454B Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. power consumption (kW): 31 Max. current (A): 54 Starting current (A): 168 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2172 Knedpfxox A A Igo Affof Weight (kg): 1063 Connection: Rp 2" Serial No.: 2200405054 Year of manufacture: 2023 Condition: Visual grade 2, Technically OK Used Used machines may have visual imperfections due to previous usage. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, functionality: unexamined, machine/vehicle number: G&L Series SSV, Used Goulds SSV Multi-stage Booster Water Pump Manufacturer: Goulds G&L Knedpfxjx A Ax Ss Affsf Model: G&L Series SSV 3500 RPM 1.5 HP 360 PSI Max 230°F Max Complete with original manuals Sold per unit

Condition: used, Year of construction: 2005, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P160/9/SG51/1K/RT50 Baujahr: 2004 Knjdexyt Tzopfx Affof Medium: Wasser Temperatur: 160° C

Condition: good (used), functionality: fully functional, Good working condition. Please check out our other listings as well. Knedpju Tkbbefx Affof

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: Kjdpfx Aew Uf Ihoffonf - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: like new (used), Year of construction: 2025, operating hours: 250 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Knedpjvgrpxsfx Affof Year: 09/2025 2800 BAR Manufacturer's warranty Engine: DEUTZ TCD 6.1 ST5, 140 kW Available immediately

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: TET702P3-20 - 2200356884, cooling capacity: 136 kW (184.91 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,131 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 23.1 m³/h, pump pressure: 3.19 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Water Chiller Manufacturer: MTA S.p.A. Model: TAEevo Tech 702 P3-20 – 136 kW Knodpfsx A Agvsx Affsf The TAEevo Tech 702 P3-20 units are air-cooled compact water chillers, designed for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valves, 678-liter buffer tank, integrated P3 circulation pump, and winter operation control down to -20°C. Cooling capacity: 136 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 23.1 Available pump pressure (bar): 3.19 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input (kW): 70.48 Max current (A): 119.28 Starting current (A): 235.01 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2131 Connection: Rp 3" Serial No.: 2200356884 Year of manufacture: 2020 Condition: Visual grade 2, Technically sound (used) Price: On request in Euros (plus VAT ex Nettetal) – 3 months warranty Used machines may show optical imperfections due to their previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Knjdpfxoxxuyts Affjf Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, Ksdpfx Aeu Nad Tjffonf labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: used, Year of construction: 2006, COMPLETE BOTTLING LINE KRONES 30,000 bph Product: still water Speed: 30,000 bph – 1.5 L PET Preform tipper - 2018 Model: m.tanner ag/prologic Caps elevator Gassner - 2006 Manufacturer: Gassner Preform aligner (part of the blow molding machine) - 2006 Monobloc with blow moulder, filler and capper Blow molding machine - 2006 Kedpfovwcdzox Affonf Brand: Krones Model: Krones Contiform S20 Type: Rotary Number of molds: 20 Filler - 2006 Brand: Krones Model: Krones Volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper (part of the monobloc) - 2006 Brand: Krones Number of heads: 18 Type of cap: Alaska 3 Principles Distribution system: pick & place Nitrogen dispenser - 2006 Model: Cryotech International Inspector for level control and cap - 2006 Model: Krones Checkmat Bottle transport - 2006 Model: Krones Synco Dryer tunnel - 2006 Brand: Europool Model: TF-04 Labeller - 2006 Brand: Krones Model: Krones Etima Type of labeller: Rotary Direction of rotation: Counterclockwise Type of labeling: Rollfed Number of stations: 1 Number of heads: 18 Type of applicable labels: OPP Plate handling: lobe cam Head adjustment: electric American input and 2 parallel outputs Label presence check on output tape Marker - 2015 Model: Markem Smart Lase C350 Shrink wrapper - 2006 Brand: OCME Model: Vega N70/2 Film launching Dual Input Handle applicator - 2006 Brand: Comag Model: Decimo HM 100/2 Equipped for bundles: 3x2 Dual Input Bundle transport: Brand: Europool Palletizer - 2006 Brand: OCME Model: Pegasus M400 Type: Layered Pallet warehouse Interlayer system Maximum workable height: 225 cm - pallet Workable pallet size: 80 cm x 120 cm Pallet wrapper - 2006 Brand: Bema Model: Silkworm Turbo Maximum workable height: 225 cm - pallet Wrapping type: rotary table Top sheet spreader Pre-stretch Pallet labeller - 2020 Brand: Eidos Model: 7P6ERLP

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Pressure: 4 bar Power: 1,0 kW Voltage: 380 V Frequency: 50 Hz Operation / Control: Fully automatic / Steuerung S7 Kjdpoxw R Rxefx Affonf Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: used, This listing is for a Aurora scentific water bath Knedpfxoxzh Hxs Affsf

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET081P3-20 - 2200401041, cooling capacity: 22.5 kW (30.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 475 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 3.82 m³/h, pump pressure: 2.69 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit Manufacturer: MTA S.p.A. Model: TAEevo Tech 081 P3-20 – 22.5 kW The TAEevo Tech 081P3-20 is a compact, air-cooled water chiller, suitable for outdoor installation (operating temperature range: -20°C to +46°C). Includes crankcase heater, phase monitoring, 140 L buffer tank, and integrated P3 circulation pump. Additional Equipment: • Retrofitted speed control for axial fans Ksdpfex Az R Hox Affenf • Bypass valve between water outlet and inlet • Flow control valves installed at water inlet and outlet • Closed filling system added • Bypass Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 22.5 kW Chilled water temperature, outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 3.82 Available pump pressure (bar): 2.69 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 12 Max. current (A): 20 Starting current circuit (A): 115 Protection class: IP54 Dimensions: Length (mm): 1862, Width (mm): 761, Height (mm): 1437 Weight (kg): 475 Connection: Rp 1 1/2" Serial No.: 2200401041 Year of manufacture: 2023 Condition: Visual grade 2, Technically OK Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may show cosmetic imperfections due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for a Nickel Electro Water bath Knedpfx Afexzh Hrsfof

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Knodpsxzhcmjfx Affsf