Used Water Bottling for sale (8,260)

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Hsdpfohix Ukox Aitonu

Condition: ready for operation (used), Year of construction: 2002, Output: 400 cycles/h, conveyor belt: single-lane, bottle table: T-version, gripper head: 1-dimensionally adjustable, packaging unit: max. 9 heads. Bottle crate dimensions: 1l plastic crate: 400mm/300mm, 0.5 plastic crate: 300mm/200mm, max. conveying capacity: 1850mm, transport heights: Bottle table height: 1200mm, container height conveyor: 750mm, control: Siemens S7. Dimensions X/Y/Z: approx. 4200mm/1900mm/1900mm, weight: approx. 4300kg. Including gripper for 1l VDF and 0.5l NRW. Documentation available. On-site inspection is possible. Hnodpfxotul Nro Aitsu

Year of construction: 2022, condition: ready for operation (used), A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible. Hnjdoy E S Eispfx Aitou

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm Hnsdpfxohu Hw Aj Aitju -Weight: 12.8 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Hsdpfx Aieig A Awotenu -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg

Condition: used, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Hnjdpsi D D Rvofx Aitsu Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Maximum operating height 10 m Maximum flow rate 10 L/min Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm Please note!!! This product is a return item with visible signs of wear and dents. No warranty included.

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators Hnsdpfx Aieb A Sxdetju -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg Hnsdpob A Sxgefx Aitou -Functionally tested

Condition: used, Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators Hnsdpfofngxfox Aitou -Frequency converter: dimensions 550/480/H260 mm -Vibrating bottle: length 450 mm -Hose length: 10 m -Weight: 98 kg

Condition: excellent (used), Several 150 m³ steel storage tanks (firewater tanks) installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firewater tanks according to DIN 14230: The tank has a firewater suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a gauging port. Furthermore, the tank has a ventilation flange with a cap in a total length of approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. Hsdofnh Tgopfx Aitsnu - The tank has been emptied, cleaned, and coated with a bitumen exterior coating at the factory. - If required, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth (a) barth-tank.de.

Condition: not inspected (used), Manufacturer: STORK capacity: 375m3/h motor: 90 kW Hedpfjm Twrzex Aitjnu

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Engine: 160 kW Hedpfem Uc R Uex Aitjnu

Condition: refurbished (used), 60 m³ / 60,000 l fire water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, material S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked or driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, seal and screws. New or used, immediately available! The container has been emptied, cleaned, overhauled and tested for tightness by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): Hnsdpfx Ajhh Srusitou - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in form B without a level gauge - Ventilation flange stub in DN 100 with cap with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with a bitumen coating for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or an epoxy resin internal coating (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery location, and you will immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also accept and purchase tanks/containers of all kinds, simply contact us. We also have these types of tanks constantly in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler Hnjdpfx Aijw D T T Ejtsu cooling capacity: 6 kW weight: 110 Kg.

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min Hnedpfxjv Ta D Ds Aiteu (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Hnodjzbib Sopfx Aitju Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Model: R0 04-1 with EWMK40 2xRVMR1ACM Width: 880 mm Hedpezqtp Rsfx Aitsnu Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Height: 500 mm Total weight: 120 kg Condition: good, second-hand

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 Hedpfxjznu S Us Aitenu * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C * Max. permissible melt pressure: 120 bar Features / Advantages * Compact and robust design * Pneumatic knife pressure system * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Hsdjzizyzjpfx Aitonu Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Hodpfezi Alxjx Aitjnu Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: new, Year of construction: 2026, - Touchscreen control - Plate heat exchanger, stainless steel - Stainless steel pumps for recirculation and pumping Technical data: Tank capacity: 50 liters Production: 150 liters/hour (nominal production per hour with 35 °C ambient temperature, 18°C inlet water temperature, 3 °C target temperature, complete tank emptying) Cooling capacity: 2.8 kW (useful cooling capacity) Electrical power: 400 V, 50 Hz, 1.6 kW External dimensions: 700 x 735 x 1435 mm, 165 kg Hedpfxjzuygks Aitonu All prices are quoted excluding VAT. Delivery: ex works Syke (shipping via freight forwarder possible, costs to be borne by the customer) Payment: prepayment upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes and errors.

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds Hsdozb Rmvspfx Aitjnu * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Year of construction: 1987, condition: ready for operation (used), Output: 8000 bottles/h, machine is fully functional. Hnsdpehr R Nysfx Aitju

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Hjdpfxszka Imj Aitenu

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Hjdpfx Ajyypmgjitonu