Used Vogel for sale (206)

Condition: used, mileage: 20,500 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2022, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * Ford Transit panel van with 3 seats – original 20,500 km – immediately available – * Diesel – displacement: 1,995 cc – 77 kW / 105 hp – Euro 6 – Green environmental badge * 6-speed manual transmission – wheelbase: 3,300 mm – additional electric heater – * German vehicle – German registration certificate – from first owner – * Vehicle immediately available and ready for collection – * Viewing by appointment only – Isdpfx Asxglfcodnea * Contact: Mr. Andreas Vogel * The information provided online is non-binding and for description purposes. * It does not constitute warranted characteristics. * The seller assumes no liability for typographical or data transmission errors. * Subject to change, errors, and prior sale. Special Features: Fixed window in sliding door right, glazed rear wing doors (opening angle 180 degrees), heated rear window, rear window wiper, wooden flooring in load compartment, interior mirror with automatic dimming, cold start package, LED load compartment lighting, plastic partition wall with window, front and rear parking pilot system, spare wheel with full road tires, rough-road package 1, front mud flaps, visibility package 1, seat package 3: driver's seat (4-way adjustable) – front passenger single seat (2-way adjustable), fabric, high trim in load/passenger compartment, heat-insulating glazing in load/passenger area, medium tint Further Equipment: Overhead storage in cab, Trailer Stability Program (TSA), Audio system 13: digital radio reception (DAB / DAB+) with 4" multifunction display, basic, indicator in exterior mirrors, on-board computer, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, FordPass Connect including eCall, heating with recirculation function, body/build: high roof panel van, body variant: medium high roof, black-grey radiator grille, steering column (steering wheel) height/length adjustable, engine 2.0 l – 77 kW TDCi CAT, My Key (2nd vehicle key programmable), digital radio reception (DAB+), wheelbase 3,300 mm, low-emission according to Euro 6d-TEMP, gear/selector lever grip in leather, wipers with adjustable intermittent setting, right sliding door in load/passenger compartment, rear mud flaps, side impact strips, seats in load/passenger compartment: 2nd row, 3-seater bench, start/stop system, integrated rear step, 10 lashing eyes, roll stability control (RSC), additional electric heater, second foldable key with remote control.

Condition: used, Year of construction: 2025, First registration: 17.03.2025 2-axle tank vehicle with 28 cbm steel tank Tank: - Tank diameter: 2150 mm - Paintwork: RAL 9006 silver - Interior with special coating - Integrated baffle plates - Agitator with hydraulic slide gate - 2x 6.00m aluminum troughs for hose storage - Open ventilation and venting with collection container - Front fill level indicator with automatic pump overfill shut-off - Suction connection center right/left and rear, 150 mm (6 inch) mechanical slide gates - Rear suction swivel arm with mechanical slide gate - 10 inch pipe at rear, slanted from tank down to tank sump Chassis: - BPW axles, 60 km/h - TÜV approval at 40 km/h - 10t axle load - 32t gross vehicle weight - Air suspension - Self-steering trailing axle - Tires: 445/65 R 22.5 - Brake drum: 410/180 mm - Axle spacing: 1810 mm - 4 polyethylene fenders Lighting: - Truck underride guard with LED tail lights - 2 rear LED work lights (1028) Vogelsang 6 cbm Pump VX-186-260 - Vogelsang Pump VX-186-260 with Vogelsang injection system and carbide interchangeable liners (1028-F) 80 km/h axle KTD - 80 km/h axle with ABS on KTD 28, automatically lockable steering axle incl. ABS/EBS (1273) Hand wash tank - Custom fabrication (1028-X) Pneumatic 6" gate valve instead of brass gate valve 6" per piece (1028-E) Front LED work light under hose tray Isdjxf Ak Hopfx Adnja (1028-A) Top docking funnel 8", hydraulically operated brass gate valve (1099) Tank paint - Tank in RAL 9006 Kumm silver Location: 54595 Prüm

Condition: used, Year of construction: 1995, x-travel 700 mm y-travel 315 mm z-travel 495 mm turning speeds 50 - 9200 U/min spindle taper ISO SK 30 DIN 69871 A quill stroke 178 mm table: 1230 x 410 mm workpiece weight max. 250 kg T-slots 7 x 12-H8 feed range X+Y 9.000 / Z 4.000 mm/min solution in X-, Y- und Z-axis 0.001 mm distance spindle /table 165 / 660 mm 32 weight of tools max. 3.0 kg Time for tool-changing ca. 5.0 sec Boring power Ø 30.0 mm threading M 24 Isdpjxab Uajfx Adnoa Milling performance 100 cm³/min coolant capacity 100 l control TNC 415 B voltage 3x 400 V total power requirement 16.0 kW weight of the machine ca. 3400 kg range L-W-H 2500 x 2500 x 2800 mm Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=vISK1iCGZ_g Features: - Robust machining center - Vertical * Vertical milling and drilling machine in single-column design * With integrated coordinate table * Height-adjustable machine head with extendable spindle sleeve - CNC HEIDENHAIN control unit "TNC 415 B", front left * Includes separate remote control - Electric motor adjustment of all axes (X/Y/Z/W axes) * Rapid traverse in all 4 directions * X+Y axes .. max. 9.000 mm/min * Z axis .. max. 4.000 mm/min * W axis .. max. 4.500 mm/min - Continuously variable speed .. 50-9.200 rpm - Heavy-duty, robust coordinate table including 7 T-slots * Two telescopic steel covers protect the cross guides * X-axis: dovetail guide * Y-axis: preloaded roller shoes on hardened steel rails * Axis driven by ball screws * With preloaded double nuts * And DC servo motors mounted directly in the spindle axis * Both axes are equipped with linear scales (direct position measurement) - CNC-controlled machine head (W axis = feed axis) * Driven by DC servo motors / toothed belt drive and ball screw * Machine head is permanently mechanically clamped by disc spring assemblies * For a secure and stable connection between the head and the machine bed * Milling and drilling spindles are mounted in the quill, . requiring no maintenance * Spindle head according to DIN 2079 allows for the use of SK 30 tools * Tool changer with 32 positions - Machine base with two drawer cabinets for machine accessories * Includes numerous tools - Work area with fully protected cabin * With wide-opening cabin doors - Coolant with external coolant reservoir - VOGEL automatic central lubrication system * Supplies oil to the guides, spindles, and drive - Original operating instructions + spare parts lists

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 01/2026, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer 30,000 liters - Type STN 30L/1 - 12/27 First registered 02/2024, from first owner V2A stainless steel tank Diameter 2,200 mm 3 baffles 1 filling dome DN500 with hinged lid 4-inch flushing line through the entire tank VOGELSANG VX 186-260 Q GL rotary lobe pump, 6,000 liters/min., replaceable housing shells Complete piping in V2A stainless steel Rotatable rear outlet at 6?, with blow-down device 8? suction at the top of the rear 6x LED work lights Large hose trays left and right Iodew Um Ucjpfx Adnsa BPW axles with disc brakes WABCO Trailer EBS with RSS stability program WABCO Optiturn - OptiTurn? Automatically detects when a vehicle is entering a curve and then loads, unloads, or raises the third trailer axle. This improves the trailer's maneuverability in tight spaces, as the turning circle is smaller and tighter turns can be negotiated. It also improves maneuverability when reversing. 1st Axle Lift Axle Tires: 6x 385/65 R 22.5 Renting is the new buying, also available from us as a full-service rental. Available NOW.

Condition: used, mileage: 15,500 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,100 mm, overall weight: 3,500 kg, operation weight: 225 kg, first registration: 12/2024, next inspection (TÜV): 12/2026, loading space length: 4,680 mm, loading space width: 1,317 mm, loading space height: 1,900 mm, loading space volume: 16 m³, emission class: none, color: blue, driver cabin: day cab, suspension: steel, tire size: 225/65R16, number of seats: 3, total length: 7,280 mm, total width: 2,050 mm, total height: 2,650 mm, lifting height: 2,653 mm, Equipment: air conditioning, cruise control, low noise, onboard computer, trailer coupling, Financing / leasing available upon successful credit check! Contact us! Errors and subject to prior sale. Comfort package, wheelbase 4,100 mm, standing height 1,900 mm, ASC wooden floor and trim, adaptive cruise control, 86 L fuel tank, digital radio DAB with 7'' touchscreen, inductive charging, USB for driver/passenger, cargo area lights 3x LED, 2 wheel chocks, spare wheel, comfort driver's seat (static), battery charged, documentation in German, partition wall to cargo area, smokers package, additional speed limiter, rear axle ratio I=3.65, without parking sensors, trailer socket 12 V 13-pin, fog lights, reversing camera with dynamic guides, rear doors with 260° opening angle, ASC wheel arch trim, ASC two-part wooden floor, ASC 2 lashing rails (4100 mm & LASC), five rows of airline rails, ASC load securing package, air conditioning compressor 170 ccm, operating manual, electric spare wheel storage in load area, manual air conditioning, grab handle on A-pillar, trailer coupling with ball head, EC control device digi 4.1, reinforced parabolic springs on rear axle, step 2, roof shelf above windscreen, external loading lights above rear doors, key with additional remote control. ----- Lease assumption possible - term 60 months - residual value €9,884.48 - monthly rate €699.54 plus VAT. Iedpsxcwfgefx Adnea

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Isdjh Ic Ufjpfx Adnea Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, maximum load weight: 20,500 kg, overall weight: 28,000 kg, axle configuration: 2 axles, first registration: 04/1996, loading space length: 13,300 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Wellmeyer 2-axle flatbed tarpaulin with Edscha roof - steering axle - portal doors - * Chassis number: WKESD00000623359 - ready for immediate use and collection - * Air suspension - BPW axles - disc brakes - tires: 385/65 R 22.5 - * Length of loading area: 13,300 mm - Total length: 13,850 mm * Width of loading area: 2,480 mm - Total width: 2,550 mm * Inside height: approx. 2,250 mm - Total height: 4,000 mm * Permissible total weight: 28,000 kg - Empty weight: 7,500 kg - Payload: 20,500 kg * German vehicle - German vehicle registration document - very well maintained condition - * COLLECTION PRICE - AS IT IS CAN BE TAKE AWAY - WITHOUT TÜV - WITHOUT LICENSE PLATE - * Please make an appointment to view * Contact person: Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent guaranteed properties. Iodpfx Adexglfijnea * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale.

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer Stainless Steel Tank Semi-Trailer K.STN L 30 / 1-10/24 – 30 m³ for Organic Waste/Slurry Vehicle type: Stainless steel tank semi-trailer for organic waste Model code: K.STN L 30 / 1-10/24 Manufacturer: Kässbohrer Technical Data Volume: 30.0 m³ * Unladen weight: approx. 5,985 kg (±3%) * Permissible gross weight: 39,000 kg * Total axle load: 27,000 kg (3 × 9 t) * Fifth wheel load: 12,000 kg * Operating temperature: up to 80°C * Test pressure: 0.5 bar Dimensions * External length: 9,180 mm * Height (empty): 3,960 mm * Axle spacing (wheelbase): 5,000 mm * Rear overhang: 3,050 mm * Saddle height: 1,320 mm * Tank diameter: 2,200 mm Tank and Body Execution: Cylindrical stainless steel tank AISI 304 (1.4301) with sloped floor for residue drainage * Manhole: 1 × DN450 with hinged domed cover * Access: Aluminum walkway on the left (in front of and behind the manhole) * Access ladder on the left, manually folding safety railing * 8" flange connections at the tank outlet * 5 m hose box (large, open-top aluminum compartment), hose holders on both sides * 4" flange for cleaning line (pre-installed) * 8" pipe at the top rear for suction and discharge operations * 8" pipe with square flange front right (prepared for level gauge) * Preparation for tank ventilation, pressure and vacuum valve * Bracket for work lights * Sight glass on rear dome Discharge system and rear level regulation: Transparent 4" rigid plastic tube for external level reading * Filling funnel: 1 × 8" (plastic), top rear in front of suction pipe * Pump: Vogelsang GL260Q * Coupling: 6" Perrot coupling with hook closure on discharge pipe * Valves: * 6" manually operated brass slide valve at outlet Iodpjw N Ad Nsfx Adnja * 4" pneumatic slide valve (cleaning pipe) * 8" pneumatic brass slide valve (tank suction line) * 4" pneumatic slide valve (tank ventilation) * Mechanical front level indicator with float and automatic pump shut-off at full load * 6" rotary joint at the rear for flexible alignment of discharge pipe (left/right/center) * T-outlet on the left with 2 × 6" pneumatic slide valves * Control box and sight glass at the discharge outlet Chassis, Axles, and Brakes Chassis: Special aluminum construction from extruded box profiles * Axles: 3 × BPW 19.5" disc brakes, trailing steering axle * Lift axle: 1st axle automatically controlled (EBS-dependent on pressure and speed) with additional switch in the tractor unit * Suspension/Brakes: Air suspension, disc brakes, EBS 4S/3M * Mechanical aluminum landing gear (24 t) * Rigid aluminum underrun protection according to UN ECE R58 Tyres and Rims Tyre size: 385/65 R 22.5 * Quantity: 6 wheels * Rims: Aluminum, matt finish * Tyre pressure monitoring system in line with R141 Electrical System and Lighting Lighting system: ASPÖCK * Work lights: 6 units (including at landing gear, under and on top of hose box, and on the tank crown) * Couplings: Standard yellow/red with integrated filter * Mudguards and anti-spray flaps matching tyre size in accordance with EU regulations Extras and Safety * Underrun protection mat * 60 wheel nut caps with "K" logo (10 per wheel) * Frame bracket for pump connection * White side reflector stripes, red rear reflector stripes according to UN ECE R48 * Rear vehicle logo not included Colours Chassis: MB 7350 Novagrau (glossy) * Tank: RAL 9006 White Aluminum + coating * Axles, wheel hubs, landing gear: unpainted * End plates and hose holders: matching tank color For further information

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Isdpfot Hw Uvox Adnsa Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Iodpfx Aewx E N Iodnoa Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: new, mileage: 250 km, power: 140 kW (190.35 HP), fuel type: electric, gearing type: other, axle configuration: 4x2, wheelbase: 3,520 mm, overall weight: 3,500 kg, operation weight: 225 kg, loading space length: 3,540 mm, loading space width: 1,740 mm, loading space height: 1,900 mm, loading space volume: 12 m³, emission class: none, color: white, driver cabin: day cab, suspension: steel, tire size: 225/65 R16, total length: 6,000 mm, total width: 2,010 mm, total height: 2,620 mm, lifting height: 2,623 mm, Equipment: ABS, air conditioning, cabin, cruise control, low noise, onboard computer, traction control, Financing / leasing possible after credit check!, Talk to us!, Errors and prior sale reserved, MY2024 electric panel van wheelbase 3520L mm Comfort Plus package Driving Assistant package ASC wooden floor and paneling ASC lashing rail 3520 & L My Iveco Infot. 10 Nav USB driver / passenger voice assistant Alexa integrated lane centering plus (LC) Sp. Ass. both sides + door lock + AbbA (BSW) intelligent traffic jam assistance (TJA) cross traffic warning rear & brake (RCTA) cargo area light 3 LED storage box driver's seat & USB steering wheel in leather luxury driver's seat, hydraulic battery charged printed matter German 4x2 additional speed limiter trailer socket 12 V, 13-pin AC charging 22 KW fog lights DC charging 80 kW reversing camera dyn. Lines Rear doors Opening angle 260 ASC Wheel arch lining Operating and maintenance instructions Electric mirror Body width 2200 Cat IV Passenger seat with MF storage Switch for body lighting Grab handle on A-pillar Trailer coupling Ball head Number of drive batteries 2 74 kWh Comfort headrests Roof storage above windshield External charging lights above rear doors Seat heating Key Additional remote control Extended partition to the cargo area Distance control ACC Stop & Go Ijdexa S Iwopfx Adnsa

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Ijdpfxodzqmzs Adnja Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, maximum load weight: 22,900 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 09/2008, loading space length: 11,300 mm, loading space width: 2,450 mm, loading space height: 2,230 mm, total width: 2,600 mm, total height: 3,800 mm, Equipment: ABS, * Schmitz SKO 18 deep-freeze trailer with Frigoblock HK 25 - doors & LBW 2.5 to. - * Chassis number : WSM000002004663 - 2 axles - with partition wall - * air suspension - BPW axles - disc brakes - tires : 385/65 R 22,5 - * Length loading area : 11,300 mm - Overall length : 11,680 mm * Width loading area : 2,450 mm - Overall width : 2,600 mm * Permissible total weight : 30,000 kg * Unladen weight : 7,100 kg - Payload : 22,900 kg * German vehicle - German vehicle registration document - 1st hand * PICK-UP PRICE - TAKE IT AS IT IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * For viewing please make an appointment * Contact person : Mr. Andreas Vogel * The information given on the Internet is a non-binding description. Iedsxglaaspfx Adnoa * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale.

Condition: used, mileage: 696,000 km, first registration: 12/2009, Year of construction: 2009, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! Ijdswnz Dtspfx Adnea ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, maximum load weight: 31,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 06/2026, loading space volume: 30 m³, Year of construction: 2024, Equipment: ABS, 3-axle LoF slurry tanker SANH SCHWARTE-JANSKY "GÜLLE-TAXI" Stainless steel V2A slurry tank trailer, 30,000 liters, pneumatic sliding cover First registration VOGELSANG rotary lobe pump type VA 186-260Q, output max. 6,000 liters/min, replaceable housing shells Automatic pump shut-off, tank fill level easily adjustable by the driver Flushing pipe DN150, with 3 outlets (in front of each baffle and in front of the front wall) 2x baffle floors 3 manhole covers, DN500 8" suction funnel at the rear top Stainless steel hose trays left and right, approx. 6,000 mm long Rear swivel outlet in 6" with Perrot coupling Drain device for the product hose All slides pneumatically operated including monitoring function Control of the slides via RADIO REMOTE CONTROL Iodpfx Aowu Hfcodnja Complete piping made from V2A stainless steel SAF off-road axles with drum brakes 1st axle LIFT AXLE 3rd axle trailing steering WABCO trailer EBS with RSS stability program 6 tires 560/60 R 22.5 Unladen ready-to-drive weight approx. 7,700 kg Fifth wheel height approx. 1,350 mm JOST crank landing gear Stainless steel storage box left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING, with us available immediately also as a full-service rental-----

Year of construction: 2002, condition: used, Pig slaughterhouse, approx. 200 pieces/hour. Location: 26215 Wiefelstede/ Germany The system is dismantled into individual parts. -consisting of the following components: -1): 1x rider seat retainer with automatic Cardiac/cerebral anesthesia, color. Banss, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x dry whipping machine make Banss, type T3S -7): 1x whip washing machine make Banss, type AW -8): 1x pre-washing machine, make Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x continuous hair removal machine, make Banss, type 300-2/1 -11): 1x lot of cable -12): 1x bleeding and brewing tunnel conveyor -13): 1x giblet conveyor -14): 1 slaughter conveyor -15): 1x PLC control, make Siemens, type S7-414-2DP -16): 1x weighing rail conveyor, make Banss, type WSF560 Li -17): 1x evaluation terminal, make Bizerba, type Banss, type ST(SWE) -18): 1x overhead railway scale, make Bizerba type ST (NSW) -19): 1x empty hook conveyor system e.g. Plate conveyor, make Höcker -20): 1x steam machine, make Certuss, type Universal 1300 oil Iedpfsh Db Hcjx Adnja -21): 1x intestinal feces separator, make Itec, type 300 -22): 1x rotary lobe pump make Itec/Vogelsang type VX136/186Q -23): 1x pump for intestinal transport -24): 1xTaifun packaging transport system for raw meat make MariMatic, type E0800-150-200FB -25): 1x ejector, make MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, make Stafsjö, type DN150 -28): 1x shaft cabinet, make MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x box stall position -31): 1x lot of pipe tracks -32): 1x lot of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Selling individual components is also possible.

Year of construction: 2018, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Brushless digital A/C servo drives and motors on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis (anchored at both ends) • Low-backlash planetary gear boxes • Fully closed cable carriers prevent the cables from damage by chips and fine dust • High quality, shielded cables for energy chains are a guarantee of reliability • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 200 mm • Z-axis travel 280 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Weight approx. 3,500 Kg CNC Control System • Siemens Sinumerik 808D Advanced • Color LCD display • IP65 protection for CNC front panel and machine control panel • Preassigned keys for common functions, such as handwheel selection, tool change, coolant control or program testing • 7-segment display for tool number • Spindle control with spindle override (rotary switch with 15 positions) and feedrate / rapid traverse Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface Servo Motors and Drives • Siemens Sinumerik Digital Field Bus • Siemens SINAMICS V70 servo drives Ijdpfxeflpmde Adnja • Siemens SIMOTICS S-1FL6 servo motors • Siemens pre-assembled MOTION-CONNECT cables Automatic Tool Change Spindle • Spindle power 8 KW (S1) / 10 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder ISO-30 • Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders ISO30 / ER32 are included 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually valved High pressure vacuum pump according to customer requirements Precision Tool Length Sensor CE Package Delivery, commissioning & training as per requirements

Condition: used, mileage: 155,000 km, power: 130 kW (176.75 HP), first registration: 02/2002, overall weight: 10,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, total width: 2,550 mm, total height: 3,560 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Mercedes Benz 1018 All-wheel drive 4x4 with Wumag WH 170 H aerial work platform - * Diesel - Displacement: 4,249 cc - 130 kW / 178 hp - Euro 2 - Red emissions sticker - * German vehicle - German registration document - immediately available - * Unladen weight: 9,160 kg - Gross vehicle weight: 10,500 kg - with air conditioning - * Vehicle is immediately available and ready for collection * Please schedule an appointment for viewing - * Contact person: Mr. Andreas Vogel * The information provided online is non-binding and for informational purposes only. * They do not represent guaranteed specifications. * The seller is not liable for typographical or data transmission errors. Iodoxglb Dopfx Adnsa * Subject to prior sale, changes and errors.

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes Ijdpfx Adehwd Dnsnoa - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: used, maximum load weight: 29,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2013, loading space length: 13,500 mm, loading space width: 2,550 mm, loading space height: 3,050 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Krone 3-Axle MEGA JUMBO Flatbed Curtain Sider with Edscha sliding roof – Lift axle – 2 units available Isdpfx Adoxglczjnja * No. 1: VIN: WKESD00000591958 – First registration: 10/2013 – Tyres: 445/45 R 19.5 * No. 2: VIN: WKESD00000617547 – First registration: – Tyres: 435/60 R 19.5 * Air suspension – BPW axles – Disc brakes – * Loading platform length: 13,500 mm – Total length: 13,860 mm * Loading platform width: 2,550 mm – Total width: 2,550 mm * Internal height: approx. 3,050 mm – Total height: 4,000 mm * Permissible total weight: 36,000 kg – Unladen weight: 6,760 / 6,450 kg – * German vehicles – German registration documents – single owner * Viewing by appointment only – Price is per unit – * Contact: Mr. Andreas Vogel * The information provided online is non-binding and for description purposes only. * They do not constitute guaranteed specifications or warranted characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to change, error, and prior sale.

Year of construction: 2017, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis • Low-backlash planetary gear boxes • Fully closed cable carriers • High quality, shielded cables • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 280 mm • Z-axis travel 480 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Weight approx. 4,000 Kg CNC Control System • FlexiCAM ACS Control System Pro • Powerful industrial CNC control system “Made in Germany” • DIN-ISO 66025 G-Code compatible • Graphical CNC simulation • Industrial PC with 17” Touchscreen display as HMI • User-friendly machine control panel with mode selectors and function keys • Spindle control with spindle override and feedrate / rapid traverse override (rotary switches) • Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Windows keyboard and mouse • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface • Remote Support via Internet • Touchscreen and machine control panel are integrated into enclosure Servo Motors and Drives • Digital servo drives with AC servo motors • High resolution absolute encoders (17 bit) • EtherCAT fieldbus Automatic Tool Change Spindle • Spindle power 10 KW (S1) / 12 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder HSK-63F • Max. 26 mm (1 1/4") tool diameter • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders HSK-63F / ER40 are included Iodpfx Ajflpriednsa Precision Tool Length Sensor 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually controlled High pressure vacuum pump according to customer requirements 4x Popup Pins Automatic Central Lubrication (Grease) CE Package Delivery, commissioning & training as per requirements

Condition: used, maximum load weight: 29,370 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2014, loading space length: 13,600 mm, total width: 2,600 mm, total height: 3,750 mm, Equipment: ABS, * Schmitz SKO 24 FP 60 Cool - Steering and Lift Axle - VIN: WSM000002010325 * Air Suspension - SAF Axles - Disc Brakes - Tires: 385/65 R 22.5 - * Loading Area Length: 13,500 mm - Overall Length: 14,000 mm * Loading Area Width: 2,450 mm - Overall Width: 2,600 mm * Interior Height: approx. XXXX mm - Overall Height: 3,750 mm * Gross Vehicle Weight: 39,000 kg * Unladen Weight: 9,630 kg - Payload: 29,370 kg * German Vehicle - German Vehicle Registration Document - First Owner * Please arrange an appointment to view this vehicle. * Contact Person: Mr. Andreas Vogel * The information provided online is non-binding. * They do not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Iodoxglc Ujpfx Adnja

Condition: used, mileage: 157,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2020, next inspection (TÜV): 08/2026, emission class: euro6, color: white, number of seats: 7, total length: 6,228 mm, total width: 2,100 mm, total height: 2,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * Fiat Dukato Double Cab with Flatbed - 7 Seats - Air Conditioning - TÜV (German Vehicle Inspection Certificate) * Diesel - Engine Capacity: 2,287 cc - 96 kW / 131 hp - Euro 6 - Green Sticker - * Gross Vehicle Weight: 3,500 kg - 6-Speed Manual Transmission - * Vehicle available immediately and ready for collection - Please arrange an appointment to view the vehicle. * Contact Person: Mr. Andreas Vogel * The information provided online is a non-binding description. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to change, errors, and prior sale. Iodpfjwlbgcex Adnea Special Equipment: Storage compartment in the driver's cab roof lining, electric exterior mirrors. Adjustable and heated, reinforced battery, document holder (smartphone/tablet), reinforced rear axle (suspension), padded headrests, radio preparation, 4 speakers, smoker's package, full-size spare wheel (including spare wheel holder), oil level sensor Additional features: Driver's side airbag, brake assist, body/structure: folding side walls, aluminum, body/structure: double cab flatbed, heated crankcase ventilation, adjustable steering column (steering wheel), 2.3 L - 96 kW JTD CAT engine, 4035 mm wheelbase, tire repair kit, low emissions according to Euro 6 emissions standard, seat cover/upholstery: fabric, cab seats: adjustable passenger seat with armrest and lumbar support, cab seats: height-adjustable driver's seat, cab seats: driver's seat with armrest and lumbar support, steering wheel control, flatbed, slightly tinted windows

Condition: used, mileage: 103,500 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 11/2020, emission class: euro6, color: white, number of seats: 3, Year of construction: 2020, total length: 5,998 mm, total width: 2,050 mm, total height: 2,522 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Citroen Jumper Panel Van L3 H2 with 3 seats – original 103,500 km – immediately available – * Diesel – Displacement: 2,179 cc – 121 kW / 165 hp – Euro 6 – Green emissions sticker * 6-speed manual transmission – Wheelbase: XXXX mm – with built-in shelving – Isdpfxsw A Ekaj Adnja * German vehicle – German registration documents – one previous owner – * Vehicle is immediately available and ready for collection – * Please schedule an appointment for viewing – * Contact person: Mr. Andreas Vogel * The information provided online constitutes non-binding descriptions. * These do not represent guaranteed characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to alterations, errors, and prior sale. Special Equipment: Passenger side airbag, audio system: digital audio system (DAB) with CD player, MP3-capable and touchscreen, driver assistance system: emergency brake assist, rear door (opening angle 270 degrees), navigation system with color display, USB port, reversing camera system. Additional Equipment: Driver’s airbag, electric and heated exterior mirrors, wide-angle exterior mirror, integrated turn signals in exterior mirrors, color-coordinated, brake assist, short digital roof antenna, body type: large-volume panel van, padded headrests, 90 L fuel tank, cargo partition, height-adjustable steering column (steering wheel), engine 2.2L - 121 kW Blue-HDI FAP CAT, wheelbase 4035 mm, full-size spare wheel, low-emission per Euro 6d-TEMP standard, sliding door on right side (cargo/passenger compartment), SCR system (AdBlue technology), side protection mouldings, seat upholstery: fabric, cab seats: front passenger double bench, cab seats: driver’s seat with lumbar support, start/stop system, permitted gross weight 3.5 t.

Condition: used, mileage: 451,500 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 04/2008, loading space length: 5,500 mm, loading space width: 2,300 mm, loading space height: 2,050 mm, emission class: euro4, color: white, number of seats: 3, total length: 7,550 mm, total width: 2,450 mm, total height: 3,250 mm, Equipment: ABS, air conditioning, parking heater, tail-lift, * MAN 8.180 with box body for laundry service – air conditioning – 3 seats – from first owner – * Diesel – displacement: 4,530 cc – 132 kW / 180 HP – Euro 4 – green environmental badge – * Leaf spring suspension front & rear – body dimensions: length 5.50m x width 2.45m x height 2.10m – * 3 seats – 6-speed manual transmission – air conditioning – Zepro tail lift, 2 tons – * Permissible total weight: 7,490 kg – curb weight: 5,695 kg – payload: 1,795 kg – * Vehicle available immediately and ready for collection – vehicle is signwritten – * Please schedule an appointment for viewing – Ijdpfowx Ubmox Adnsa * Contact: Mr. Andreas Vogel * The details provided online are non-binding descriptions. * They do not constitute guaranteed features. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors and prior sale.