Used Vmc for sale (118)

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Bridgeport VMC 760XP Year of manufacture 2006 Heidenhain iTNC 530 Spindle speed up to 12.000 rpm Drive power 25 KW Tool changer 30-fold BT40 IKZ 20bar M&H infrared 3D probe Chip conveyor Total operating hours 30256 hrs. Bjdpfxouk Nt Ee Aafelc New Heidenhain SSD hard disk New Heidenhain power unit Machine is 2nd hand Machine can be inspected and demonstrated at our premises.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Bljdpfx Aaowynrzjfjc Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Spindle: Transmission type: Belt Spindle speed: 40-8000 rpm Collet chuck: BT40 Motor power output: 11/18.5 kW Torque: 52.5/118 Nm Working table: Size: 1200x600 mm T-slots (width x quantity x spread) 18x5x100 mm Maximum load: 1000 kg Accuracy: Accuracy: 0.008 mm Repeatability: 0.005 mm Tool changer: Type: Drum Maximum tool diameter (full/free slots between tools/length): Φ78/Φ150/ 300 mm Maximum tool weight: 8 kg Miscellaneous: Compressed air demand: 0.65 Mpa Bjdpfx Aaevhck Njfolc Energy consumption: 25 kVA Machine weight: 7000 kg Dimensions: (L x W X H): 2900x2800x3200 mm

Condition: like new (used), Year of construction: 2016, Matchmaker VMC 860 Year of manufacture: 2016 X-860, Y-560, Z-600 BT 40 Spindle speed: 10,000 rpm Tool changer: 24 positions Chip conveyor, coolant Bljdpfx Aaex Rp Ulofjc Excellent condition!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bjdpfx Aaex Iwg Refslc Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 27000 kg Measurements height 3400 mm Movement X-Axis Movement 2050 mm Z-Axis Movement 800 mm Y-Axis Movement 1100 mm Blodjx D Idvspfx Aafoc Main Drive Number of axis 3 Spindle Speed 6000 RPM Tool taper BT 50 Tools Slots in storage 40 Dimensions Machine Length 7200 mm This 3-axis Johnford VMC-2000SHD was manufactured in 2005. It features a large table size of 2200 × 1000 mm and extensive travels: X-axis at 2050 mm, Y-axis at 1100 mm, and Z-axis at 800 mm. With a spindle speed ranging from 10 to 6000 rpm and a tool magazine capacity of 40 tools, this vertical machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Bodpfx Ajx D Elwoafolc Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 4800 kg Control Unit Brand SIEMENS Model Sinumerik 810D Bodpfox D I Unsx Aafjlc Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information. Application Types Milling

Condition: good (used), Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Bedpfxox Nap De Aafjlc

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm y-travel: 410 mm Blsdpfx Aaeviwg Ujfsc z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on" *

Condition: ready for operation (used), Travel X - Y - Z axis: 1,016 x 500 x 570 mm Bsdpfxsx Hx Dbe Aafolc table clamping area: 1,100 x 470 mm max. table load: 1,500 kg rapid traverse X - Y axis: 18,000 mm/min rapid traverse Z axis: 12,000 mm/min feed rate: 8,000 mm/min spindle speed range: 1 - 8,000 rpm tool holder: ISO 40 drive power - main spindle: 11 kW tool magazine: 24 positions year of manufacture: 2001 control: FANUC O-M machine weight approx.: 6,800 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp Bedpfx Asw Nklheafolc - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Bledpfx Astrhq Hjafsc good condition

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Bsdpfx Aasxrca Uefolc

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Year of manufacture: 2000 Bsdpfx Aexxakwjafelc

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Bljdsx Ap S Eepfx Aafec Note: The machine can still be inspected under power until week 50.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° Bljdjxuqv Ajpfx Aafjc B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, operating hours: 6,984 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 635 mm, controller model: Heidenhain TNC 530 i, total height: 3,000 mm, total length: 4,000 mm, total width: 3,050 mm, table width: 600 mm, table length: 1,370 mm, table load: 950 kg, number of slots in tool magazine: 20, The Hartford VMC-1270 is a robust and precise CNC machining center, ideal for demanding milling operations. With a generous travel range of 1270 x 635 x 635 mm, the machine offers versatile applications in metalworking. It is equipped with a Heidenhain TNC 530i control system, a BT-40 tool taper, and a spindle speed of up to 8000 rpm. Blsdpfexyh Itjx Aafoc The table measures 1370 x 600 mm, enabling the machining of larger workpieces as well. With a machine weight of approximately 7200 kg, the VMC-1270 stands for stability, precision, and reliability. The machine was built in 2011 and is designed for operation with 380 V power.

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Bledpstud Utsfx Aafec Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Condition: used, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table width: 500 mm, table length: 1,200 mm, rotational speed (min.): 70 rpm, rotational speed (max.): 10,000 rpm, FADAL VMC 4020 MACHINING CENTER Bledpfxjxxa E Us Aafsc MOD. 906-1 CNC 88 HS TABLE DIMENSIONS 1200 x 500 BALL SCREW DIMENSION 40 mm X AXIS: 1000 Y AXIS : 500 Z AXIS : 500 spindle speed 70-10,000 rpm NUMBER OF TOOLS : 21. USED MACHINE INTERNAL CODE : CS 274

Condition: excellent (used), Year of construction: 2012, operating hours: 3,060 h, functionality: fully functional, Longitudinal travel: 2000 mm Cross travel: 520 mm Vertical travel: 540 mm Table: 2500x520 mm Table load: 2000 kg Spindle speed: 60-12000 rpm Operating hours: 3060 h Fixed table design Spindle taper: BBT40 ATC: 30 positions Power supply: 53 kVA Bjdpfx Aaoxwlu Ejfslc Year of manufacture: 2012.09 Length: 4650 mm Width: 3235 mm Height: 2845 mm Weight: 13300 kg Fixed table design 2-zone machining (2x650 mm)

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, 3-Axis Machining Center Manufacturer: Bridgeport Model: VMC-1000 XP Year of manufacture: 10-2002 Control type: Heidenhain iTNC-530 Operating hours: n/a S/N: 82XXXX Technical Data: ----- - Travel X-Y-Z: 1,050 x 610 x 600 mm - Spindle: max. 8,000 rpm - Tool holder: SK40 - Tool magazine: 22 positions - Coolant system - Through-spindle coolant (IKZ) - Glass scales on all axes X-Y-Z - Central lubrication - Weight: approx. 4.2 t - Dimensions LxWxH: 3,000 x 2,350 x 2,400 mm Accessories: ----- Blodpfx Aajw Nyfdsfsc - Manuals - Tool holder package Special features: ----- - Through-spindle coolant (IKZ) deactivated due to defective flow tube in spindle - Spindle replaced in 2023, few hours of operation, precise concentricity

Condition: excellent (used), Year of construction: 1999, operating hours: 1,100 h, functionality: fully functional, Johnford vertical machining center Model VMC 1300 Year : 1999 Table size : 1500 x 710 mm Bedpfx Aoxvxtreafolc Longitudinal travel : 1300 mm Cross travel : 850 mm Vertical travel : 800 mm Spindle speeds 80 - 8.000 rpm Tool change 24 pcs Spindle taper : ISO 40 Control : FANUC O-M Cycle hours : 1100 hours Short arbors Interface RS-232 C Coolant

Condition: excellent (used), XYZ 710 VMC Vertical Machining Centre, Table Size 800mm x 445mm (Vac Table not included) with Siemens Sinumerik CNC Control, 24 Tool ATC, BT40 Spindle Taper, 8000rpm Spindle Speed, Filtermist FX5002 Extractor. S/No. SMT00054 Bodsxvpffjpfx Aafolc Delivery available on request, at extra cost. 14 day return or repair.

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding entails the obligation to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Bjdpfxexn Ikws Aafelc X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Table dimensions: 1,150 x 490 mm Number of tool slots in magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg EQUIPMENT Technical documentation Spare parts (as shown in the photos) Note: Only a 7.5t truck can turn around on the premises. It is advisable to send a smaller truck for collection.