Used Vertical Milling Machine for sale (66,796)

Condition: good (used), Used MEXIM Vertical milling machine with display console Machine for printers Visualizer 3 axes WIZARD Swivel head Ihedpfx Aheg Np Enj Nst Table 660 x 360 mm Spindle speed Rpm 20 - 1600

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm Ihedpfxjx Iwg Ro Ah Njt z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm Ihsdpfsx Iwg Dox Ah Net z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm z-travel 400 mm Isdoxzk N Aepfx Ah Noht weight of the machine ca. 9000 kg

Condition: used, Year of construction: 1999, x-travel 505 mm y-travel 355 mm Ihsdpfxjxzk N No Ah Njt z-travel 610 mm control Heidenhain TNC 430 weight of the machine ca. 4000 kg

Condition: used, Year of construction: 1998, x-travel 840 mm y-travel 760 mm z-travel 840 mm control Fanuc MCS-516 Isdpfx Ahjxzk Rgj Nsht

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 560 mm z-travel 560 mm weight of the machine ca. 8500 kg Ihjdpfoxzk Rysx Ah Nst

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 500 mm z-travel 500 mm Isdpfxjwtr Elo Ah Njht control Siemens

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 610 mm z-travel 610 mm control Heidenhain 530 weight of the machine ca. 6700 t Ihsdpfx Ahsxbtnbo Net

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm Ijdpfx Aswgi Dreh Njht z-travel 400 mm control Heidenhain Mill Plus V600 weight of the machine ca. 7000 kg

Condition: used, Year of construction: 2008, x-travel 1800 mm y-travel 510 mm z-travel 480 mm Ihjdpjxuv Svefx Ah Net weight of the machine ca. 5500 kg

Condition: used, Year of construction: 2017, x-travel 3600 mm y-travel 1100 mm z-travel 900 mm Iedpfxjx H Twvj Ah Noht weight of the machine ca. 30450 kg

Condition: used, Year of construction: 2003, x-travel 3000 mm y-travel 800 mm Iodpfx Ajxzk Raoh Neht z-travel 800 mm weight of the machine ca. 16000 kg

Condition: used, x-travel 1050 mm y-travel 600 mm z-travel 600 mm control Fanuc Ihsdevnh Umepfx Ah Not weight of the machine ca. 7200 kg

Condition: used, Year of construction: 2003, travel -x axis 1.200 mm Iodpsx E Dr Ijfx Ah Nsht travel -y axis 900 mm travel -z axis 500 mm control HEIDENHAIN tool taper SK 40 milling spindle dia. in forward position 70 mm table surface area 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V

Condition: used, The Servomill® UFM 8 V, a state-of-the-art Conventional Vertical Milling Machine from KNUTH, is designed to enhance efficiency and precision in various machining applications. With its horizontal spindle and swiveling vertical milling head, this robust machine boasts a wide speed range and a large clamping table that accommodates various workpieces and clamping devices. The Servomill’s advanced electronic features, including infinitely variable servomotor feed and electronic handwheels, provide users with the intuitive operation reminiscent of CNC systems without the need for programming. Ideal for repair workshops and training departments, the UFM 8 V combines conventional milling practices with significant advancements in reliability and maintenance-free operation, thanks to high-quality servo drives and preloaded ball screws. With an operational output of up to 5000 rpm and integrated features such as a coolant system and pneumatic tool clamping, this model promises both productivity and ease of use. Experience the next level of milling technology with the Servomill UFM 8 V. Request a quote today to see how this remarkable machine from the Conventional Vertical Milling Machines product group can elevate your production capabilities. Isdpfx Ahov Amixe Nsht

Condition: new, The UWF 6, a leading model from the Conventional Vertical Milling Machines category and part of the Universal Milling Machines group, exemplifies KNUTH's commitment to precision engineering. This robust universal milling machine boasts a rigid HT-200 cast-iron construction, providing a solid base for precision work. It features a large milling table with a 1,300 mm travel on the X-axis, allowing for efficient handling of substantial workpieces. The machine is equipped with a universal cutter head that swivels on two planes and a horizontal spindle with its own drive, enhancing versatility. Its innovative design minimizes downtime through rapid positioning and feeds, ensuring increased productivity. With a user-friendly control panel and extensive standard equipment—including a coolant system and chip tray—this milling machine is engineered for both ease of operation and maintenance. For greater capacity and accuracy in your machining tasks, request a quote for the UWF 6 today, and experience the advanced capabilities of our Universal Milling Machines. Isdpfou E Nwbox Ah Noht

Condition: used, Year of construction: 2017, travel -x axis 1.050 mm travel -y axis 530 mm travel -z axis 510 mm control MAZATROL Smooth G number of spindle speeds 40 - 12.000 U/min tool taper SK 40 numbers of positions in the tool changer 30 table-size 1.300 x 550 mm Milling machining centers - vertical | VCN-530C - 2017 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VCN530C | VCN-530 C | VCN 530C | VCN 530 C Iodsx Avr Ejpfx Ah Njht

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Ihjdpfx Astryc Neh Net Manufacturer: VEB Fritz Heckert Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations Ihodpfx Ahow Nklhe Nst - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions Iodpfxetrhq Ho Ah Nsht - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m Ihedpfx Ahjtuggcs Not STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Ihedpfsqhkm Sjx Ah Not

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Ihsdpfx Aoxyafwoh Not Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 2001, x-travel 660 mm Iedpjxxmmrsfx Ah Neht y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.