Used Vertical Grinding Machine for sale (65,484)

Condition: excellent (used), Year of construction: 2023, CNC Machining Center Hedelius T7 – 2600 1 R Magnum Control: Heidenhain TNC 7 Year of manufacture: 2023 Internal machine no.: 56 Travels: X-axis F/B: 2,600 / 2,030 mm Y-axis: 750 mm Z-axis F/B: 695 / 800 mm Pendulum mode: 760 / 1,300 mm Total clamping area: 3,080 x 750 mm Table load capacity: approx. 2,500 kg Integrated rotary table Ø 750 mm Bjdpfxoy Ew Ebs Aa Djdb Interference diameter: 1,100 mm Workpiece weight approx. 500 kg Spindle taper: SK 40 Tool magazine: 50 positions Spindle speed: 50 - 14,000 rpm Power: 29 kW Equipment: - KinematicsOpt - Handheld control unit HR 510 FS - Compressed air nozzle at spindle head - Inclined bed belt filter system 900l - Internal coolant supply (ICS) 25 bar - Infrared receiver M & H - 3D infrared measuring probe M & H 25.50 - Tool touch setter - Exhaust filter - Partition wall - Blow guns - Rinse guns

Condition: used, Year of construction: 2016, operating hours: 16,699 h, functionality: fully functional, machine/vehicle number: 14575612604, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, nominal power (apparent): 18 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 600 mm, table length: 1,150 mm, rotational speed (max.): 14,000 rpm, overall weight: 6,650 kg, spindle speed (max.): 14,000 rpm, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, We are offering this used DMG MORI DMC 850 V vertical machining center, year of manufacture 2016. Model: DMC 850 V Serial Number: 14575612604 Year of Manufacture: 2016 Maximum Spindle Speed: 14,000 rpm Bdsdpfx Aaey H Nb Dj Dob Weight: 6,650 kg Factory ID: 3351438 Connected Load: 18 kVA Maximum Current Consumption: 26 A Rated Current: 35 A Short-Circuit Current: 0.35 kA Maximum Voltage: 440 V Rated Voltage: 400 ±10 V Mains Frequency: 50 Hz Control Voltage (AC): 230 V Control Voltage (DC): 24 V If you have any questions or require further information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1998, A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible. Bdjdpfxey H I H Ee Aa Dob

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Bdedpfx Aaey H I H Sj Deb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Sinumerik, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 30, DMG MORI DMC 1035 V – Well-Maintained Vertical Machining Center with Low Operating Hours For sale is a very well-preserved vertical machining center, DMG MORI DMC 1035 V, manufactured in 2008. The machine stands out due to its excellent condition, comparatively low machine hours, and the proven Siemens Sinumerik control system. It is ideally suited for precise milling tasks in both single-part and series production. Machine Data and Features: - Year of manufacture: 2008 - Spindle/machine hours: see photo - Tool magazine: 30 positions - Spindle speed: 14,000 rpm - Tool holder: SK40 - No internal coolant supply (IKZ) - Control: Siemens Sinumerik - Electronic handwheel - Smooth operation and technically reliable - Exceptionally low use for its year Maintenance and Condition: The following components have been renewed in recent years: - Cover louvres of the X-axis left and right - Interior lighting Accessories / Scope of Delivery: - No vices - No tool holders or tools included This DMC 1035 V is a solid and durable DMG MORI machine, providing a cost-effective solution for professional applications. The machine is ready for immediate use. Bdsdpfxsy H I Eho Aa Dob If you are interested or have any questions, please do not hesitate to contact us. You are welcome to contact us anytime via message or telephone.

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock Bdjdpfx Ajxni Iqea Djb CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2004, Deckel Maho 3 axis vertical machining center in good condition with 15781 spindle hours. Well maintained by DMG services in the Netherlands. Immediately available for delivery. Viewing possible upon appointment. More info available on request. Cnc control Siemens Sinumerik 840D Number of axes 3 Maximum Reach X 2200 mm Maximum Reach Y 560 mm Maximum Reach Z 720 mm Maximum Clamping Height 600 mm Table Size (LxW) 2600x600 mm Maximum Table Load 2200 kg Guide Type Linear Max. Speed 18,000 rpm Max. Power 35 kW Tool Holder SK40 Bedpfx Aaey H Hz Is Dsdb Tool Magazine Capacity 60 Tool Change Duration 9.6 sec Including: ELECTRONIC HANDWHEEL 18.000 RPM HEIDENHAIN MEASURING PROBE MODE 4 DIVIDING WALL CHIP CONVEYOR SCRAPER BELT TYPE IKZ WITH PAPER BELT FILTER BLOWN AIR THROUGH SPINDLE EXTERNAL COOLING OIL MIST SEPARATOR BREAK REMOVAL TOOL WITH LASER RESIN GUN NET SERVICE EXTENSION IBN NET SERVICE Optional: Large set of SK40 tooling and vises/clamping systems available. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, total height: 375 mm, Surface grinding machine (226600) ELB SWN 6 NC-K; SN: 196900887, Magnetic clamping table, 350 x 600 mm, travel X/Y/Z 600 x 375 x 375 mm, Maximum table load 300 kg, grinding wheel Ø 300/76.2 mm, recess on both sides, dressing device, Lach diamond, missing grain, dresser, type MK0, maximum speed range 3,000 rpm, power 3.7/4.5 kW, machine weight 3,500 kg, footprint L/W/H 2,750 x 2,250 x 2,400 mm, out of service Bdodpfx Asy H Hhnoa Djb

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter Bdodpfx Aoy Erxvoa Djb - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Working Area & Capacities Table dimensions: 250 x 500 mm Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Bodpey H Dg Iofx Aa Dodb Grinding spindle motor power: 2.2 kW Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 430, spindle speed (max.): 18,000 rpm, operating hours of spindle: 28,000 h, coolant supply: 40 bar, Equipment: chip conveyor, IKZ (internal coolant supply) NC rotary table (C-axis) NC swivel head Tool holder: HSK 63 FD function Bjdpfxey Ep Rto Aa Dsdb Pallet changer Measuring systems: infrared probe for workpiece measurement Additional magazine with 120 spaces Spindle has already been replaced

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel Bdedpfx Aey Enyvja Deb * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Lizzini IG-FL in as-new condition: - Year of manufacture: 2019 - Siemens control system Bodpfxsy Em Tne Aa Dodb - 2 external grinding wheels - 1 internal grinding spindle - C-axis - CNC-controlled B-axis Suitable for capto grinding (non-cylindrical/irregular shapes) Centre distance: 1000 mm Centre height: 200 mm

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z 3048 x 1016 x 762mm, Table size 3048 x 711 mm, Maximum workpiece weight 1814 kgs Spindle speed 8,100rpm, Spindle taper BT40, Motor 30HP, Haas control, 30 station ATC Bdsdpjy Emyujfx Aa Dob

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 Bdsdpfx Aoy Emufja Dsb spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), REISHAUER US is a thread grinding machine designed for precision, high accuracy and reliability. Capacities: max grinding length 450 mm, clamping length 1055 mm, max workpiece Ø 250 mm, thread Ø 2–250 mm, spindle bore 45 mm, weight on centres 200 kg, pitch up to 100 mm, max module 10, wheels Ø 280–350 mm width 4–40 mm. Specs: wheel speeds 6 steps 1700–2540 t/min; work spindle 27 steps up to 160 t/min; 3x380 V 50 Hz; grinding spindle 4 kW; total 15 kVA; machine ≈4700 kg; dims 3300×1930×1800 mm. Accessories: coolant, wheel and flange sets, automatic profile/wheel trueing, rayon redressing device, travelling steady, set of gears, centers, oil-mist extractor, lamp. Achieves tight tolerances; suited to automotive, watchmaking, machine tools, aerospace, medical. Bdodpfxoy Emg Is Aa Dob

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Bjdpfx Asxmd Snea Djdb Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 units CNC Brother models S500X1/S700X1. Year of manufacture 2014 1 unit with 3 axes 1 unit with 4 axes with hydraulic station without vapor filtration system 1 unit with 4 axes Bodpoyap R Djfx Aa Dodb with hydraulic station with vapor filtration system

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm workpiece height 375 mm digital readout 2 Achsen HEIDENHAIN table-size 650 x 350 mm Bdjdpfx Aaey Ehw Is Deb max. table load 400 kg magnetic clamping plate 600 x 350 mm dist. center of grinding spindle - table 525 mm table travel longitudinal 650 mm table travel cross 350 mm table feed 2 - 28 m/min grinding wheel size 300 x 30 x 76,2 mm dressing device Kopfabrichter voltage 400 V total power requirement 11,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,20 x 1,70 x 2,25 m band filter unit 1,00 x 0,75 x 0,80 m electric cabinet 0,90 x 0,40 x 2,25 m - Serial-No.: 18090201 - Automatic vertical feed - Electric handwheel - HEIDENHAIN digital display, 2 axes - Head dresser - Coolant device - Belt filter system

Condition: used, Year of construction: 2008, x-travel 1200 mm y-travel 900 mm z-travel 500 mm table surface area 1400 x 900 mm spindle taper HSK A 63 spindle taper DIN 69693 spindle turning speed - stepless 10.000 U/min feeds x/y/z -stepless 1 - 30.000 mm/min no. of tools in magazin 87 tool diameter max. 80 mm tool length - max. 300 mm Bedpoy Ehwujfx Aa Dsdb weight of tools max. 8 kg table load max. 1800 kg internal coolant system feed 40 bar control HEIDENHAIN, iTNC 530 total power requirement 44 kVA weight of the machine ca. 12 t Accessories/Equipment: chip conveyor, solid clamping table, tool breakage monitoring, oil emulsion mist extraction, electronic thermal compensation (i)TNC, electronic hand control (i)TNC, blow-off device, Rotoclear, Blum Laser A 3

Condition: excellent (used), Year of construction: 2010, Winmax control Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-position turret with driven tools VDI 40 Chip conveyor, IRCO short bar loader IRS-RBK 1001 Tool measurement Parts catcher Bdodpfxsy Ehlxo Aa Djb

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Technical data: Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Grinding width: 150 mm Grinding wheel diameter: 200 mm Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm Bodpoy Ehh Tefx Aa Dedb The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Condition: used, Year of construction: 2018, functionality: fully functional, Year of manufacture: 05.06.2018, max. spindle speed: 10,000 rpm, net weight: 3,070 kg, total weight: 3,500 kg, operating hours: machine: 8,678:16 h, spindle: 3,567:18 h, external dimensions: 2,500 x 3,000 x 2,500 mm, equipped with MAX 5 single controller, WinMax software, 1 x 19" LCD color monitor, high-pressure coolant system for through-spindle coolant supply, emulsion coolant, coolant pressure 10 bar, 20-position automatic tool changer. Note: Tools and tool holders are not included in the scope of supply. Integrated hydraulic tool clamping system with workpiece length measurement via probe and tool length calibration via laser, RENISHAW OMP60 workpiece probe system, RENISHAW NC4 laser tool setter system, chip conveyor screw, including digital operating manual on USB stick. Condition note: The machine was never used for hard metals, only for copper. Bedpfsy Ht U Ijx Aa Dodb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 81 h, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, Available for sale is a NS LMD2500 2Z long belt grinding machine, built in 2022 and in as-new condition. The machine has only 81 operating hours. Machine Details Bjdpey Httqefx Aa Dodb Manufacturer: NS Model: LMD2500 2Z Machine Type: Long Belt Grinding Machine Year of Manufacture: 2022 Operating Hours: 81 Condition: As New The machine is fully operational and available for inspection by appointment. If you have any questions or would like further information, please feel free to get in touch by message.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 002840, travel distance X-axis: 1,800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, overall weight: 9,000 kg, - Year of manufacture: 2000 - Single owner, used in own operation Bdedpfsxgq A Tsx Aa Dsb - Fully functional, powered up, ready for demonstration - Control system: Heidenhain TNC 426 - Tool magazine: 30 positions - X-axis travel: 1800 mm - Y-axis travel: 520 mm - Z-axis travel: 520 mm - Pendulum operation: 2 x 700 x 520 mm - High-pressure band filter system / ICS - Coolant supply through spindle: 20 bar - Cross belt conveyor: 50 x 1800 Net price ex location Luckenwalde (Germany), unloaded, excluding transport