Used Vertical Gear Hobbing Machine for sale (70,968)

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Kwsdjycwrbspfx Ad Not

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 42,000 m/min, rapid traverse Y-axis: 42,000 m/min, rapid traverse Z-axis: 42,000 m/min, controller manufacturer: FANUC, controller model: i-Series, BRAND: HYUNDAI-WIA MODEL: F-600D CATEGORY: VERTICAL MACHINING CENTERS (ROTARY PALLET SYSTEM) YEAR OF MANUFACTURE: 2018 CNC CONTROL: FANUC i-SERIES MACHINE WEIGHT: 10,000 kg MACHINE DIMENSIONS: Length: 3,904 mm, Width: 3,970 mm, Height: 3,080 mm Spindle Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (continuous/30 min): 15/18.5 kW Working Capacities X axis: 800 mm Y axis: 600 mm Z axis: 600 mm Distance spindle - table surface: 200 - 800 mm Distance between column and spindle center: 690 mm Table Table dimensions: 2 x (900 x 650 mm) Number of tables: 2 Table load capacity: 2 x 500 kg Table change time: 8.5 sec Kjdpjxxl Egsfx Ad Nowt Feedrates Rapid feedrate (X/Y axes): 42,000 mm/min Rapid feedrate (Z axis): 42,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 30 stations Max tool diameter (adjacent/non-adjacent): Ø 90 / Ø 150 mm Max tool length: 300 mm Max tool weight: 8 kg Accessories Chip conveyor Coolant collecting tank with pumps High-pressure coolant pump through spindle line Spindle line air conditioner Manuals, electrical schematics, and CE Declaration This model stands out among those you have provided as a Vertical Machining Center equipped with a Rotopallet system (two independent tables) and a very high rapid traverse rate of 42,000 mm/min.

Condition: used, Year of construction: 2001, operating hours: 58,458 h, machine/vehicle number: 15035704944, Hour meter: - 58,458 hours - 38,450 hours Kjdpeycvuhofx Ad Nowt Equipment: - 1 compact filter system (Interlit, SUK 200 - 900) - 1 linear control unit (Heidenhain TNC 430) - 1 2-axis NC rotary tilt table (700 x 500 mm) - 1 vertical tool changer with 32 stations (HSK 63) Note: - Machine is sold without tool holders, etc.!!!! Defects: - Hoses of the external coolant supply need to be replaced. - Interlock switch needs adjustment. Note: - Linear bearing for slide (Y-slide) - new in 2025 (approx. net €10,000) ATTENTION: - Additional item 219 = 1 hydraulic unit (for DMU 70) (in the container - outdoor area) - (starting price: €80.00) Note: The buyer is responsible for pumping out and disposing of the coolant (approx. 200 liters)!!!

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 560 mm, Dugard VMC 1000 E Kjdpfxsycu D Io Ad Nswt Fanuc Oi-MD control 10K Spindle 24 tool carousel X1050 Y540 Z560 Chip Augger Through spindle coolant Some tooling included Very nice machine working video can be sent on request

Condition: used, Year of construction: 1969, functionality: fully functional, We offer the following: 1 x universal milling machine Wanderer, type OG/E Kedpfx Adoycr Rxs Newt Year of manufacture: 1969 Serial number: 23128 Condition: operational

Condition: good (used), Year of construction: 1997, functionality: fully functional, Dahlih MCV-1500 – Technical Specifications Machine Type: Vertical Machining Center Manufacturer: Dahlih Model: MCV-1500 Axis Travels Kwodpeycqx Usfx Ad Not X-Axis: approx. 1,500 mm Y-Axis: approx. 630 mm Z-Axis: approx. 700 mm Spindle Spindle Taper: BT / ISO 50 Spindle Motor Power: approx. 15–17 kW Max. Spindle Speed: approx. 4,500 rpm Tool System Automatic Tool Changer: approx. 24 tools Table Table Load Capacity: approx. 1,300–1,500 kg (depending on configuration) Control System Typically equipped with Fanuc CNC control

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Ksdpfx Aevxpuijd Newt Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Kedpfx Adjyac Tle Njwt Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 Ksdpfx Aeyaci Hod Njwt tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2019, x-travel 1016 mm y-travel 660 mm z-travel 635 mm Ksdpfx Adjyclx As Newt control Haas

Condition: excellent (used), operating hours: 4,920 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Siemens, controller model: 840D SL, table load: 300 kg, spindle speed (max.): 18,000 rpm, spindle nose: BBT Big+, number of slots in tool magazine: 25, Equipment: documentation/manual, DMG Mori Milltap 700 machine for sale, in new condition. Kedpfx Adsxghpwo Newt Siemens 840 D SL control. We bought the machines because of the small space requirement, 18,000 spindle, fast tool change and 60 meter rapid traverse. The machine can be viewed and tested under power. We can help with packaging and loading onto a truck. 2x automatic door for robots. 40 bar Internal cooling, filter system. Prepared for 4 and 5 axis (Lehman). Heidenhain linear scales on all axis. Renishaw measuring systems. Chip conveyor. 4 chanel hidraulic clamping system. Documentation.

Condition: used, Year of construction: 2021, turning diameter 400 mm turning height 300 mm swing diameter 520 mm workpiece weight 60 kg x-axis 995 mm y-axis +/-30 mm z-axis 580 mm chucking diameter max. 500 mm Tool drive speed max. 6.000 1/min Main spindle drive power 37 KW tool turret with 12 work positions BMT75 total power requirement 55 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5,7 x 4,6 x 3,6 m Circulating workpiece transport system, O-design Drag frame system for 10 workpieces Coolant supply: 15 bar Coolant pump with a flow rate of approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Dual coolant filter, manually switchable Filter mesh 100 µm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change Max. = 2,200 rpm (standard speed according to DIN 6386) Kwedpfx Adjx H Aibo Net Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 External finishing cutter 1x 8.BMT25VL8IKX50 External roughing cutter 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holder 2x 27.V520HYDL26 drill bits, 20mm diameter 1x 42.V522L08Ik drill bits, 22mm diameter 1x 27.V514WNL31 Drill Bit Diameter 14mm Software Package Operating Instructions / Maintenance Manual

Condition: good (used), Year of construction: 2015, In good technical condition and fully functional. Year of manufacture: 2015. Max. table load capacity: 1,814 kg. X-axis: 2,134 mm, Y-axis: 813 mm, Z-axis: 762 mm. Spindle: 8,100 rpm. Operating hours: 4,770 h. M30 counter: 83,396. Control system: Inline Direct-Drive. Distance between spindle nose and table (~ max): 864 mm. Distance between spindle nose and table (~ min): 102 mm. Kedpex U Tf Nsfx Ad Njwt

Condition: used, Year of construction: 2007, Operating hours: 7,669 h Technical Specifications: Travel X/Y/Z: 500 / 400 / 500 mm Distance column-spindle: 400 mm Distance spindle nose-table: 102 - 610 mm Kedpsw D Dgijfx Ad Nowt Distance floor-table: 787 mm Table size: 990 x 400 mm Ball screw diameter: 32 mm, double-supported Rapid traverse: 25.4 m/min Max. feed rate in X/Y/Z: 20 m/min Spindle speed: 10 - 8,000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool stations: 21 Max. tool diameter: 76 mm (up to 114 mm with free adjacent stations) Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3,765 kg Equipment: GE Fanuc 0i-MC Control: - Standard CNC controller - User-friendly graphical display - Easy operation, programming, and diagnostic capabilities Steinmeyer ETA and double-supported ball screws: - Increased rigidity - Minimal friction Cast iron base with robust box guideways: - Flame-hardened flat guideways - Wide contact surface on guide rails - High vibration damping

Condition: used, Year of construction: 2007, Operating hours: 6,796 h Technical data: Travel X/Y/Z: 500 / 400 / 500 mm Distance column-spindle: 400 mm Distance spindle nose-table: 102 - 610 mm Distance floor-table: 787 mm Table size: 990 x 400 mm Ballscrew diameter: 32 mm (double-supported) Rapid traverse: 25.4 m/min Kwodpfx Adow Du Eio Nst Max. feed in X/Y/Z: 20 m/min Spindle speed: 10 - 8,000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool positions: 21 Max. tool diameter: 76 mm With free adjacent positions: 114 mm Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3,765 kg Equipment: GE Fanuc 0i-MC control: - Standard CNC control - User-friendly graphical display - Simple operation, programming, and diagnostic features Steinmeyer ETA and double-supported ballscrews: - Increased rigidity - Minimal friction Cast iron base with robust flat guides: - Flame-hardened flat guides - Wide support on guideways - High vibration damping Note: The tool changer on this machine is defective (no longer changes tools).

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Kodpfx Adexwyzye Njwt Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format

Condition: used, Year of construction: 2011, X-Axis: 2032 mm Y-Axis: 660 mm Z-Axis: 610 mm spindle speed: 12.000 U/min. with internal coolant power: 18 kW tool holder: SK 40 40 places table load: 2.700 kg Kodpfsmn If Djx Ad Nowt machine weight: 18.000 kg operating hours: 11.417 hrs spindel hours: app. 5.000 hrs. (maximum) spindle changed in year 2020 - Technical error and prior sale is reserved. -

Condition: good (used), Year of construction: 2003, TECHNICAL DATA Control FANUC OIMB Kedoxqqy Hjpfx Ad Nowt Axes X: 760 mm Y: 530 mm Z: 560 mm Dimensions L: 235 cm W: 200 cm H: 258 cm Weight: 5500 kg

Condition: repair required (used), Year of construction: 1995, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 7,500 rpm, Equipment: chip conveyor, documentation/manual, The machine is partially functional and needs some repairs, hence the low price. The gearbox can not change gears and has several alarms (see image). Model Haas VF-1 Manufacturing year 1995 X axis travel 508mm Y axis travel 406mm Z axis travel 508mm Spindle power 10Hp Gearbox Max spindle speed 7500rpm Tool changer caroussel type with 20 tools Tool holder BT40 type Rigid tapping Programmable coolant nozzle Kwsdjycfzdepfx Ad Nst Swarf conveyor

Condition: ready for operation (used), Used bevel gear lapping machine Manufacturer: Oerlikon Model: SL 2 The machine is available for immediate collection. Kwsdpfeycc Riox Ad Not

Condition: new, Year of construction: 2025, - FANUC 0i-MF Plus "NEW" - 10.4" LCD color screen - Diagonal, MANUAL GUIDE i Machine Table - Table size: 1,120 x 560 mm - Load capacity: 1,000 kg - T-slot width: 18 mm - Number of T-slots: 5 - T-slot spacing: 100 mm - Table height from floor: 900 mm Travel paths and distances - X / Y / Z travel paths: 1,050 / 560 / 560 mm - Spindle nose to table surface: 150 - 710 mm - Spindle center to column: 600 mm Linear axis guides & speeds - Flat guides in X / Y / Z axes - Rapid traverse X/Y/Z: 36/36/34 m/min - Milling feed: 1 – 10,000 mm/min - Minimum increment: 0.001 mm Tool magazine (CAM type) / tool changer - Tool holder: BBT-50 (optional SK-50) - Number of magazine positions: 24 Kwsdpfxswkf Ize Ad Not - System: random - Max. tool diameter: Ø 105 mm - Max. tool diameter with free adjacent positions: Ø200 mm - Max. tool length: 300 mm - Max. tool weight: 15 kg Spindle - Spindle taper: BTT-50 BIG-PLUS® (optional SK-50) - Drive type: 2-stage gearbox - Speed level 1: 80 - 1,500 rpm - Speed level 2: 1,500 - 8,000 rpm - Drive power (30 min/continuous): 11 / 7.5 kW - Torque (30 min/continuous): 236/161 Nm up to 369 rpm - Lubrication: Grease - Inner bearing diameter: Ø80 mm - Spindle cooling: Oil Coolant, chip, and compressed air management - Coolant system including 400-liter tank and pumps - External coolant around the spindle - Internal cooling 50 bar - Bed flushing, 0.85 kW / 130 l/min., (optional) - Chip spirals on the right and left side of the machine bed Chips are conveyed to the front of the machine - Chip spiral (optional: belt or scraper belt chip conveyor) Chips are conveyed to the left side of the machine - Compressed air nozzle on the spindle (M32/M33) - Compressed air through the spindle (M38/M39), (Optional) - Compressed air and coolant gun Other Equipment - Pivoting control panel - Electronic handwheel (wired) - Central oil/air lubrication system - Spindle oil cooler - Fully enclosed housing - Work light - Heat exchanger on the control cabinet - Auto-Power OFF function - Hand tool set - Signal light - Transformer 400 VAC, 50 Hz - CE Declaration of Conformity

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Kwjdpfeifn N Nox Ad Njt Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Vertical machining center with 1000 mm in the Y axis, ideal for mold making. Year of manufacture: 2010 Control: Heidenhain iTNC 530 Table dimensions: 2220 x 1000 mm Table load capacity: 3000 kg Travel: x 2020 mm, y 1000 mm, z 800 mm Spindle drive: 25 kW Rapid traverse (x/y/z): 16/16/12 m/min 4 spiral chip conveyors beside the Y axis 4 flat guides in the Y axis electronic handwheel Thread cutting without compensation chuck automatic central lubrication Magazine with 40 positions and fast double-arm changer ISO 50 taper automatic shifting gearbox with oil cooler from ZF Kwodoxln A Ispfx Ad Not Glass scales on all axes Through-spindle coolant 20 bar Paper band filter on separate coolant tank, 330 l Machine weight approx. 19,000 kg Machine immediately available due to business closure The machine can still be inspected under power.

Condition: used, Year of construction: 2010, operating hours: 8,594 h, functionality: fully functional, machine/vehicle number: DNM6500181, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 112 Nm, controller manufacturer: Fanuc, controller model: Fanuc i Series, total height: 2,726 mm, total length: 3,350 mm, total width: 2,815 mm, table width: 1,300 mm, table length: 670 mm, table load: 500 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, Used DNM650, 2010, but still in great working order. Kwodpsyccv Ejfx Ad Nst

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,734 h, functionality: fully functional, machine/vehicle number: MV-0090-000559, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, torque: 117 Nm, controller manufacturer: Fanuc, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used DOOSAN DNM4500. In great working order. Kedpfx Adoyccryo Njwt Renishaw probe system OMP 60