Used Vertical Borer for sale (7,397)

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Isdpfjzly S Iex Aa Eoaw Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 1980, turning height: 3,050 mm, workpiece weight (max.): 40,000 kg, turning diameter: 5,200 mm, Technical specifications Faceplate diameter: 4750 mm Swing diameter: 5200 mm Max. height under cross rail: 3250 mm Iedpozlynvofx Aa Eeaw Max. height under tool post: 3050 mm Chuck speed: up to 32 rpm Max. table load capacity: 40,000 kg Ram travel (vertical): 1400 mm Machine weight: approx. 110 tons

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: B-7270, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, TECHNICAL DATA Manufacturer: KONDIA Model: B-1050 Year: 2004 Control unit: Heidenhain iTNC530 Serial number: B-7270 TABLE DIMENSIONS Work area: 1200 x 500 mm. T-slots (Nº x Width x Distance): 5 x 18 x 100 mm. Table to floor height: 885 mm. TRAVEL X: 1,000 mm. Y: 500 mm. Z: 610 mm. SPINDLE Spindle taper: BT40 Speed range: 12,000 rpm Distance spindle to table surface: 140-750 mm. FEEDS Cutting feed rate: 0-30,000 mm/min Rapid traverse rate: 30,000 mm/min ACCURACY Position accuracy (scales): 0.01 Repeatability: 0.006 Resolution: 0.001 MOTOR Spindle motor: 7.5 Kw. AUTOMATIC TOOL CHANGER Nr. of tools: 18 Max. Ø (adjacent tools): 85 mm. Isdpfx Aszlycysa Ejaw Max. Ø (non-adjacent tools): 135 mm. Max tool length: 250 mm. Max. tool weight (1 tool): 6 Kg. Tool taper: ISO 7.388 / BT40 Pull stud bolt: ISO 7388-1 / 2-AJIS B 6.339 WEIGHT Aprox. Weight: 5,500 Kg.

Condition: good (used), Year of construction: 2017, machine/vehicle number: V380C0102, I am selling a slightly used machine. Ijdpfjzlx Hdox Aa Ejaw

Condition: new, Year of construction: 2022,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,373 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,016 mm Travel in Y-axis: 660 mm Travel in Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate X-axis: 18,000 mm/min Rapid traverse rate Y-axis: 18,000 mm/min Rapid traverse rate Z-axis: 18,000 mm/min Feed length X-axis: 1,016 mm Feed length Y-axis: 660 mm Feed length Z-axis: 630 mm Feed rate X-axis: 12,700 mm/min Feed rate Y-axis: 12,700 mm/min Feed rate Z-axis: 12,700 mm/min Iedpfx Aaozlxnhj Ejaw Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load: 1,814 kg Number of tool pockets in tool magazine: 30 MACHINE DETAILS Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm Operating hours: 6,617 h Spindle operating hours: 4,373 h EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant chiller Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High-speed machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: excellent (used), Year of construction: 2018, Control: Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle coolant 3D probing system Iaedpfeywpfwjx Aa Ejw

Condition: used, x-travel 1.020 mm y-travel 510 mm z-travel 610 mm surface area 1.020 x 610 mm spindle tunring speed 10.000 U/min spindle taper SK 40 In our estimation, the machine is in good used condition and can be inspected under power by appointment. Iaedpfezaf Ixjx Aa Ejw Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm Ijdsy Tbtlepfx Aa Eeaw spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 Iedpjy Nn Etsfx Aa Eeaw turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Iajdpfx Ajy Dvnxea Esw Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ijdpfx Aasyw Tm Es Esaw Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Iaedpfx Ajxq Hkuja Eew The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Iedowth Szepfx Aa Eoaw

Condition: used, Year of construction: 2007, x-travel 740 (915) mm Iasdpfezkl Ekex Aa Esw y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 turning speeds 20-12.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 30/20 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 700 kg spindle hours 8.961 h total power requirement 32,5/17,5 kW weight of the machine ca. 7,3 t dimensions of the machine ca. 2,8 x 2,4 x 2,4 m Machining Center HERMLE U 740, built in 2007 Accessories: Tool holders, see pictures

Condition: good (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, BOEHRINGER NV 250 CNC vertical turning lathe For sale is a BOEHRINGER NV 250 CNC vertical turning lathe, manufactured in 2005. The machine is ideally suited for automated series production of turned parts. The pick-up spindle and the existing workpiece feeder enable automatic loading and unloading. Technical data: Manufacturer: BOEHRINGER Type: NV 250 Year of manufacture: 2005 Spindle head: A6 Max. chuck diameter: 250 / 315 mm Spindle bore: 65 mm Iodezkk Udjpfx Aa Eeaw X-axis: 760 mm Z-axis: 260 mm Y-axis optional: ±50 mm Max. spindle speed: 5,000 rpm Spindle power: 31 kW Max. torque: 350 Nm C-axis: available 12-position tool turret Tool holder: VDI 40 / DIN 69880 Rapid traverse X/Z: 120 / 40 m/min Machine weight: approx. 8,500 kg Connection: 400 V / 50 Hz / 3 AC Equipment: Pick-up spindle Automatic workpiece feeder C-axis 12-position turret VDI 40 tool holder Chip conveyor Coolant system UNIFIL extraction system / filter system Documentation available Condition: Used Machine complete Inspection under power possible by arrangement

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Siemens control system, 12-position tool changer, BT40, Travel range X500 - Y300mm, Renishaw touch probe, Accessories. Ijdpfx Ajzkk Nuea Eoaw

Condition: like new (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: TNC620, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 977 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A unique opportunity! This Doosan DNM4500 from 2019 is in like-new condition and has only 977 spindle hours! Exceptionally low operating hours, perfectly maintained, and ready for immediate use. The machine is very well-equipped and can be viewed in operation at our facility! Additional options & accessories: - Internal cooling (TSC, 20 bar) - Electronic handwheel Iasdpjzkkhqsfx Aa Eow - Chip conveyor - Renishaw OTS tool probe. - Receiver for Renishaw 3D probe. - Spindle cooler - Preparation for 4th axis. - Approx. 30 tool holders. - All original documentation.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Iaedpfx Aozkkgmea Eew

Condition: reconditioned (used), CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 2014 Travel ranges: X 800 Y 600 Z 500 Speed range: 20 – 15,000 rpm, stepless With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Air blow through the spindle center IKZ 40 bar Chip conveyor BLUM tool breakage/measurement system Coolant system Manual cabinet door, manual cabinet roof Isdpey U H Iqsfx Aa Esaw Polycarbonate safety screens Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Control cabinet cooler (RITTAL) Spindle oil cooler Oil mist extraction Chip flushing gun 4 adjustable machine feet Operating manuals

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Iasdjzkkcuepfx Aa Esw Ram Travel 38” 4 Std jaws Main motor 40hp Newall 2 Axis Digital Read Out

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Iedpfezkkczjx Aa Eoaw 12.000 rpm, SK 40 30 places in tool changer. 4.axis on table will come.

Condition: good (used), Parts shown by hand not come. SK 40 ,30 tool places in tool changer. Isdpfxjzki Rke Aa Esaw

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 24,000 rpm, Control system: SIEMENS 840 D solutionline Operating hours: 12,400 h Spindle hours: 2,850 h Table surface: 840 x 420 mm Max. table load: 300 kg Tool interface: BBT 30 Tool magazine: 25 positions Chip-to-chip time: 1.7 s Chip conveyor Software package: - Job Shop - Siemens Mdynamics Iaodpfx Aajzkimxo Esw Dimensions L x W x H: 2340 x 1650 x 2500 mm Weight: 4,100 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp Ijdpfx Aszlbx Nea Ejaw CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro)