Used Vce for sale (64)

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Podpjdzqc Iefx Aalopl Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: good (used), Year of construction: 1989, Max. turning Ø:1400mm Podpowvrtusfx Aalspl Table Ø: 1200mm Control: CNC Altstohm Cyber 3000 Length: 2700mm Width: 2400mm Height: 3950mm Weight: 0kg

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Ppedpfxowb Ayio Aalsl Make: DS Dorries Scharmann Type: VCE 2000 FMC Control: SIEMENS 840C Year: 1998

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Psdpowk Nm Iofx Aalepl

Condition: good (used), Parts on table not come. Marked with red. Pedpfxewxdyxo Aalopl

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. Ppedpfswx N Nfex Aalsl X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 rpm HSK 63

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm Ppedpfswx Rafex Aalsl 10.000 rpm

Condition: good (used), Year of construction: 2013, functionality: fully functional, Machine in good condition, hand-shown parts are not included in the set. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Z 600 mm Heidenhain TNC 620, 16,000 rpm, HSK 63 Ppodpfx Aajw Dbt Tolol

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,889 h, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, Machining centre with only 1,889 spindle hours! TECHNICAL DETAILS Travel X-axis travel: 860 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Spindle data Max. spindle speed: 10,000 rpm Psdpfx Aaow Ngmusljpl MACHINE DETAILS Spindle hours: 1,889 h Power-on hours: 42,782 h Number of controlled axes: 3 Control model: HEIDENHAIN iTNC530

Condition: used, functionality: fully functional, machine/vehicle number: 6568443, Year of construction: 2018, operating hours: 1,136 h, load capacity: 1,200 kg, lifting height: 5,540 mm, free lift: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 3,100 mm, fork length: 1,200 mm, empty load weight: 5,950 kg, drive type: Elektro, High-lift order picker Chassis number: 6568443 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 80V Battery Ah: 960Ah Battery year of construction: 2018 Ppedpfx Aaew I H Naeljl Description: Toyota VCE 120 No.: M0446 Year of manufacture: 2018 Operating hours: 1,136 The device is visually and technically in very good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We still have a large selection of other devices on site.

Condition: good (used), Year of construction: 2007, operating hours: 3,130 h, load capacity: 1,500 kg, lifting height: 6,950 mm, fuel type: electric, mast type: triplex, construction height: 3,150 mm, Field of application: Internal logistics Fork carriage: Other Please contact Pieter de Vries , , ) for more information Podoxakwkjpfx Aalepl

Condition: ready for operation (used), Year of construction: 2019, X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much. Ppedsv Hndfspfx Aalsl

Condition: used, Year of construction: 2002, Used machining center from Victor Pedpfx Aaeyfmu Delepl Type: V Center 125 X-axis: 1250 mm Y-axis: 500 mm Z-axis: 600 mm SK 50 taper Table dimensions: 1400 x 550 mm 6000 RPM Coolant through spindle: 15 bar Spindle power: 18.5 kW Tool changer: 32 stations Year of construction: 2002 Transport dimensions: height: 265 cm / depth: 235 cm / length: 450 cm

Condition: used, Year of construction: 2018, x-travel 1.060 mm y-travel 600 mm z-travel 560 mm Control Heidenhain TNC 640 table dimensions 1.120 x 520 mm spindle tunring speed 12.000 U/min power capacity 11/31 kW tool taper SK 40 Podpfxsydqrdo Aaljpl number of tool places 30 Pos. rapid traverse ( x / y / z ) 48/48/32 m/min weight of the machine ca. 6.850 kg auto power on hours ca. 9.848 h spindle hours ca. 2.854 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Internal coolant supply, 20 bar - Oil separator - Prepared for 4th/5th axis Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2011, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Victor machining center Type Vcenter-102E Psdpfx Ajyc Sxcsalepl Year 2011 Fanuc CNC Sold complete

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Pjdpfx Ajgulkijalopl Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: 21i-MB, This 3-axis Victor Vcenter A-110 was manufactured in 2009. It features a FANUC 21i-MB CNC, with a working range of X 1100, Y 600, Z 560, and a spindle speed up to 12000 rpm. It includes an ISO 40 tool holder and a 30-tool magazine, complemented by a conveyor and high-pressure system. Consider the opportunity to buy this Victor Vcenter A-110 vertical machining centre. Contact us for more information. Ppsdpfx Aeyallwsalel Machine Benefits Technical Machine Benefits • Number of tools: 30 • High pressure

Condition: ready for operation (used), Year of construction: 2023, total height: 2,812 mm, overall weight: 6,850 kg, This 3-axis Victor Vcenter P106 was manufactured in 2023. It features a Heidenhain 620 CNC, a spindle speed of up to 12,000 rpm, and a tool changer with a 30-tool capacity. The machine offers a robust one-piece Meehanite cast iron base and column, optimized for stiffness and vibration damping. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter P106 machine we have for sale. Contact us for more information. Additional information • Travels: X-axis 1060 mm, Y-axis 600 mm, Z-axis 560 mm • Rapid feed X/Y/Z: 32 / 48 m/min • Axis servomotor power: 3 kW • Ball screw diameter: 40–45 mm • Ball screw pitch: 16 mm • Guideway width: 45–35 mm • Axis acceleration: 0.5–0.7 G • Table • Size: 520 × 1120 mm • Max load: 600 kg • T-slots: 5 × 18 × 100 mm • Max speed: 12000 rpm • Spindle taper: BBT-40 • Motor power: 11–15 kW • Tool Changer Capacity: 30 tools • Max tool diameter (adjacent empty): 75 (150) mm • Max tool length: 300 mm • Max tool weight: 7 kg • Tool-to-tool change time: 2.3 s. • One-piece Meehanite cast iron base and column with oversized ribs for high rigidity • Stabilized outdoors for at least 6 months to remove internal stresses • Designed for efficient chip evacuation and easy operator access Ppedpfox D N Dwjx Aalol • Structure developed with FEA (Finite Element Analysis) for optimal stiffness and vibration damping • Linear guideways on base (X/Y axes) and column (Z axis) • Dual screw conveyors for chip removal Dimensions Machine Depth 3363 mm

Condition: not inspected (used), Year of construction: 2005, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 10,000 rpm, overall weight: 4,200 kg, table 900x350 mm travels 750x410x500 mm spindle ISO 40 Ppjdox Irxzjpfx Aalol max speed 10,000 rpm weight 4,200 kg

Condition: new, Year of construction: 2023, Brand new system stacker with elevating cabin designed for storing and retrieving loads as well as for order picking in very narrow work aisles. Type (group): Order picking (high storage) Operating mode (guidance): Induction loop Year of manufacture: 2023 forklift (in production, delivery May/June) Serial no.: 6959414 Nominal load capacity: 1500 kg Center of gravity: 600 mm Ppjdpsiyprcofx Aaljl Lifting height: 10,250 mm Lifting height (platform): 8600 mm Order picking height: 10200 mm Mast type: Triplex Height of the folded mast: 4460 mm Mast height extended: 11040 mm Total length of the truck (head folded): 3846 mm Forklift width: 1270/ 1520 mm Ground clearance: 60 mm Own weight (without battery): 6790 kg Battery (weight): 1760 kg Turning radius: 1698 mm Working corridor: 1760 mm Distance between shelves: 1850 mm Forks: 1200 mm Travel speed with/without load: 10/ 12 km (programmable) Lifting/lowering speed: 0.4/ 0.4 m/s Traction battery (acid): TAB Standard 48V8EPZS1240Ah + BFS Rectifier (high efficiency): Polar Q420LOG 24/ 36/ 48V, 20-180A (programming, analytics) Braking system: electro-mechanical Rollers/wheels: Vulkollan (PU) Signal generator (no wiring): included Net price: EUR 97,700 / piece without shipping and assembly/commissioning The narrow aisle forklift comes from the official distributor of Toyota Material Handling Poland. If you are interested, please contact us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12501, ram adjustment: 30 mm, table width: 222 mm, table length: 322 mm, installation height: 197 mm, stroke adjustment: 42 mm, overall weight: 450 kg, pressing force: 10 t, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Pjdpfex A Ah Tex Aaljpl

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Ppsdpfoxnmhnjx Aaljl Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2011, Year of manufacture: 2011 Ppodpfx Aexqzkijalel 11,100 spindle hours X/Y/Z: 2050/550/510 mm Fanuc 18i control Through-spindle coolant (IKZ) Spindle speed: 12,000 rpm Chip conveyor Machine dimensions for loading: X/Y/Z 4.5/3/2.7 m Machine weight: 10 tons

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Ppjdpfxeqi Ufxe Aalol

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min Pedpou Tuk Hsfx Aalspl - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.