Used Vacum Dryer for sale (1,832)

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. Kdodjuy Thmepfx Ag Aew The offer is valid until 31.12.2024

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid) Kjdexgg Hbspfx Ag Aodw

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Kodpfxexgdrbs Ag Ajdw

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 245 kg, Offered is a scrubber-dryer “B 50 W Bp” with brand Kärcher. Kdodpfx Aexgdgfeg Asw The machine was purchased in 2023 and has rarely been used since then. The machine is therefore in very good condition. The control unit was replaced in 09/2025 and the machine was completely inspected by the manufacturer. The machine is fully functional.

Condition: used, Dryer Manufacturer: Eisenmann Kjdpswtfwzsfx Ag Aedw Manufactured: 2001

Condition: excellent (used), Year of construction: 2014, Films up to 137 cm UV DRYER FCD-01 (S. No.: 82252 // Age: 2008) Kdjdjxcamyspfx Ag Aew

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Kjdpjtty Rajfx Ag Aodw Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm Kdedoumvmkjpfx Ag Ajw - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: good (used), IR dryer for 28” (50x70 cm) paper and cardboard processing, for example in the delivery of a 28” offset machine Kdjdpfov Nzq Rjx Ag Aew The lamp holder contains 18 lamps of 1kW; the frame in which everything is attached and soldered is liquid cooled, preferably with coolant, the warm air is treated by 2 blowers, one for supply of cool air and one for extraction of the warm air in case of paper stop or paper crash where the machine would stop with sheets in the delivery. The lamps are then switched off and hot air is forcibly extracted. Everything is clearly indicated in diagrams and that is all complete.

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Ksdpevgt Ucjfx Ag Ajdw Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.

Condition: excellent (used), I am selling wood drying kilns in very good condition. Ksdpfxsxf Nybo Ag Aodw

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Kodpfx Aewg Sgcog Aedw Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: like new (used), Year of construction: 2025, Binder FED 115 Laboratory Dryer from 2025, ex-demo unit. Model FED 115 | Drying and temperature chambers with forced convection and advanced timing functions Advantages - Best energy efficiency on the market - Excellent temporal and spatial temperature accuracy - USB port for data logging - Temperature range up to 300 °C PRODUCT DESCRIPTION The BINDER FED Avantgarde.Line temperature chamber offers virtually unlimited performance capabilities and is particularly easy to adapt. Extended timing functions and an adjustable fan allow for precise control of temperature and convection conditions. KEY FEATURES Kedpfxjxftfzo Ag Asdw Temperature range: - Ambient temperature plus 10°C up to 300°C - Up to 30% lower energy consumption compared to standard market devices - High temperature accuracy thanks to APT.line™ technology - Adjustable fan speed - Controller with LCD display and advanced timing functions - Electromechanical air flap control - 2 chrome-plated wire shelves - Stackable design - Integrated, independent, adjustable temperature safety device class 2 (DIN 12880) with visual alarm - Ergonomic handle design - Ethernet interface - USB port for data logging

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Kjdpjv I Akvsfx Ag Ajdw Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 1996, Used Bottle Washer Dryer Cames 8+8 Up to 5000 BPH In the bottling industry, efficiency and reliability are crucial. Consequently, they ensure smooth production and strict compliance with quality standards. This used Bottle Washer Dryer emerges as an optimal solution. Significantly, it is ideal for those seeking high-performance bottling machinery, focusing on sustainability and process optimization. Technical Details and Configuration Kdedpfxevgt Rde Ag Asw This Used bottle washer dryer cames, produced by Cames and named model RTF 8+8, handles up to 5000 bottles per hour (BPH). This level of efficiency of the machine is notably high. Moreover, the machine boasts 8 heads with a clockwise rotation. Thus, this ensures uniform and complete bottle cleaning and drying. Safety and Maintenance of the Bottle washer dryer Importantly, safety is fundamental for industrial machinery. Therefore, the Used Bottle Washer Dryer Cames includes several safety features. These features significantly ensure operator protection during use. Additionally, technical manuals are available. They greatly facilitate maintenance and troubleshooting, consequently ensuring a long machine life. Electrical Data and Machine Condition of Used bottle washer dryer cames From an electrical standpoint, the Bottle washer dryer cames 8+8 operates at 380 V and a frequency of 50 Hz. This detail is crucial for operations in specific electrical environments. Currently, the machine is in production, which demonstrates its reliability and ability to operate in continuous production contexts. However, it is also available in stock condition. This availability offers remarkable flexibility for companies needing quick integration into their production cycles. Manufacturer’s Reliability and Year of Production Cames, the manufacturer, is well-known for its quality and reliable bottling solutions. Produced in 1996, the machine consistently maintains high performance over time. This steadfast performance confirms the manufacturer’s commitment to creating durable and efficient machinery. Conclusions of the Bottle washer dryer cames 8+8 In conclusion, purchasing this machine represents a highly beneficial choice for companies aiming to increase the efficiency of their bottling process without compromising quality. With high performance, enhanced safety, and proven reliability, this machine stands out as an ideal, sustainable, and long-lasting option in the bottling sector.

Condition: like new (used), Year of construction: 2025, Binder M 400 from 2025, barely used showroom dryer in as-new condition Model M 115 | Drying and temperature chambers with forced convection and advanced programming capabilities Advantages: - Uniform temperature control thanks to APT.line™ preheating chamber - Identical testing conditions throughout the entire usable volume regardless of sample size or quantity - Excellent thermal insulation reduces operating costs - Advanced programming capabilities PRODUCT DESCRIPTION With a maximum temperature of +300°C and versatile programming options, the M series material testing chambers are ideally suited for material research as well as aging tests. High air throughput ensured by a powerful fan allows for rapid heating. KEY FEATURES Temperature range: +23°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Reinforced, variable-speed fan Electromechanical exhaust air flap control Intuitive controller with touchscreen—segment and real-time program capability 2 chrome-plated wire shelves included Independent, adjustable Class 2 (DIN 12880) temperature safety device and independent Class 3.1 (DIN 12880) temperature protection with selectable optical/acoustic alarm on controller Failsafe function – PT100 backup sensor Kodpfxsxftb Nj Ag Aodw PC connectivity interface: - Ethernet - Built-in data logger, measured values in open format, accessible via USB

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet without cross bar conveyor - Producer Cefla - Type ECO LIGHT - Working width 1.300 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps Kdsdpfjvun Uyox Ag Asw - For gallium lamps - Mirror pivoting - Total connection power 14,61 kW - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts Kedpfxou Edhuo Ag Aedw - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 1998, machine/vehicle number: 71257/1, - Producer Cefla/Sorbini - Type Ecolight Kdsdsumvp Eepfx Ag Aow - Year of construction 1998 - Working width 1,300 mm - working height 870 + - 20 mm - max. part height ~ 70 mm - Number of tubes from above 1 pc. - Tubes placed straight 1 pc. - Suitable for mercury tubes - Suitable for gallium tubes - Bar transport - Rod pitch ~ 95 mm - Feed adjustable 5 - 25 m/min - Length 1,500 mm + 500 mm - Volt,Hz 400 /50 - Total electrical connection 12.56 kW - Voltage fluctuations max. +/- 5 %

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm Kdedpfx Aetz Dg Uog Ajw - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2008, - Producer Efsen/Cefla - Type Woodcure 1400 - Year of construction UV 2008, Transport/Conveyor 1998 - Working width 1.300 mm (1.445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Length cross bar conveyor - Cross-bar pitch 95 mm - Producer transport system Cefla - Feed speed infinitely adjustable by hand wheel ~ 5-25 m/min - Width 3.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 38 kW Kdjdpfxevupdcs Ag Asw - Voltage fluctuation max. +/- 5 %

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Ksdpfx Agsumvqce Aodw

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying Kdodpeu S N R Eofx Ag Asw - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 Kodpfx Asumvkcjg Aedw - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) Kjdju Abn Topfx Ag Asdw - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock