Used Uv Drier for sale (1,270)

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 266 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-On Scrubber Dryer Comac C85 B – Professional Cleaning Machine in Near-New Condition This machine was originally used as a demonstration model at trade fairs and events, thus it has only 266 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B - Year of manufacture: 2019 - Operating hours: 266 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Clean/dirty water tank: 300 litres - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Note: Brushes, battery, and charger are missing Condition: The machine is in a very well-maintained, near-new condition. Origin: Lrodpfx Ajxw Rl Nohvji The device was acquired as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details are provided to the best of our knowledge, but without guarantee of completeness, accuracy, or any specific properties. The device is sold as described and as inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 48 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in almost as-new condition. This machine was originally used as a demonstration unit at trade fairs and events, and therefore has only 48 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2018 - Operating hours: 48 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) Lsdpfsxw Rkrex Ahvjri - Fresh water/waste water tank: 300 litres - Surface performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased at an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical details and descriptions are based on manufacturer information. All information is given to the best of our knowledge and belief, however, we do not guarantee completeness, accuracy, or specific characteristics. The device is sold as described and inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and omissions.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 6, total length: 1,700 mm, total width: 3,100 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 760 kg, working width: 1,600 mm, energy consumption: 4 kWh, product height (max.): 100 mm, table length: 1,000 mm, table width: 1,640 mm, Equipment: cooling unit, documentation/manual, Large Format Flatbed LED UV Printer The SIGNRACER 1610 is a reliable and versatile flatbed printer designed for industrial-grade production. Equipped with either Ricoh Gen.6 printheads, the printer offers excellent adhesion on various substrates, making it an ideal choice for printing on both dark and transparent surfaces in a single pass. Its LED UV curing system offers variable power levels and is air-cooled, providing a long lifespan and excellent performance. With its high-quality construction and advanced features, the SIGNRACER 1610 is a top choice for a range of industrial printing applications. It is ideal for producing high-quality graphics on both dark and transparent surfaces with its White and Gloss inks, in addition to CMYK process colors. Its ability to print on rigid and flexible materials such as PVC boards, Aludibond, PS, PP, Acrylat, PET-G, and Glass makes it perfect for printing signs, displays, and exhibition graphics. Ricoh's smaller drop print heads are suitable for special applications that require higher precision, such as watch faces and industrial components. Signracer also develops its own waveforms and inks, allowing for even higher print output and top quality at maximum printing speeds without compromise. This ensures a perfect match between our ink formulations and waveforms, especially in grayscale printing. Specifications Printhead - Ricoh Gen.6 Printhead Count - 4 Printbed Size - 1600 mm x 1000 mm Carriage Speed - Ricoh Gen.6: 1.26 m/s Vacuum Table - 2 Honeycomb zones with registration pins Dimensions (H x W x D) - 1300 mm x 3100 mm x 1700 mm Weight - 760 kg Energy Consumption - 4 kW Max. Media Width - 1640 mm Max. Print Width - 1600 mm Media Type - Rigid and flexible (PVC Boards, Aludibond, PS, PP, Acrylat, PET-G, Glass) Media Thickness - Maximum 100 mm Curing System - LED UV with variable power levels LED UV Lamp - 90 mm / 14 Watt/cm2 Color Configuration - CMYK + White + Varnish Ink Consumption - Ricoh Gen.6: 8 ml/m2 Lredpeunw Eqsfx Ahvji Draft (4 passes, 600x900 dpi) 26 m2/h Production (6 passes, 600x900 dpi) 20 m2/h Quality (9 pass, 600x900 dpi) 15 m2/h

Condition: repair required (used), Year of construction: 2008, operating hours: 244 h, functionality: limited functionality, overall weight: 2,100 kg, Hako B1100 cleaning machine + sweeper With only 244 hours from 2008 2 brushes are included loose Device runs perfectly, battery OK incl. 36V charger Sold as a spare parts donor Item location is 75053 Gondelsheim See pictures Ledpfx Ast T Ud Iohvori Shipping via freight forwarder or collection only by appointment

Condition: excellent (used), Year of construction: 1999, I sell the 1-lamp UV-drying tunnel Cefla UV TTE 2000 Year 1999 Working width 1400mm. Total length 2,00m 1 Lamp GA 120 W Lrsdpfxoynvw Hj Ahvji Very good condition, available immediately.

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet without cross bar conveyor - Producer Cefla - Type ECO LIGHT Ledpfxjvun Uyj Ahvsri - Working width 1.300 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Mirror pivoting - Total connection power 14,61 kW - Location - Voltage / HZ 400 / 50

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps Ledpfxeumvmkj Ahveri - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine Ljdpfx Aex Tpx Ajhvjri - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 Ljdpsyifwpofx Ahvori - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm Lredpfx Ahstz Dg Ujvoi - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm Ljdpfou Afu Rex Ahvsri - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps Lrsdjxn Nlvopfx Ahvei - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm Lsdpfjvupdcjx Ahveri - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, for installation on an existing bar conveyor. Ledpeumvqcjfx Ahveri Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor Lsdju S N R Ejpfx Ahveri - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-0400, Technical data: - Manufacturer: Venjakob - Type: H (UV) - Working width: 1,300 mm - Length: 2,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency converter - Frequency converter not included in delivery - Conveyor belt suitable for ambient temperature up to approx. 120°C - Height: 900 ± 50 mm - Motor power: 0.75 kW - Motor ATEX-compliant - Belt control: pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey Lrjdoyh Hu Tspfx Ahvsi - Voltage fluctuations: +/-5% - Location: in stock

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps Lrjdpfxeumvkce Ahvei - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) Lrjdou Abn Topfx Ahvoi - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Lodpfxsykr Rze Ahveri

Condition: repair required (used), Year of construction: 2017, operating hours: 15,939 h, functionality: limited functionality, machine/vehicle number: R678B751, number of ink cartridges: 8, color channels: CMYK, number of print heads: 2, I am offering for sale a flatbed plotter Mimaki JFX200-2513. Working area: 1300x2500 mm 2 print heads Currently, the machine is loaded with 2xCMYK; conversion to CMYK+W+C is possible. Low usage: 4916 m2 The machine has mechanically damaged print heads. Printing is possible, but banding starts to appear relatively quickly. Lsdpfxsxzpvzs Ahveri

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: MDY2310/110, DY2310/014, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Lsdoym Rdlepfx Ahvjri Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Lrjdpjym N Nmofx Ahvji Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imaging unit and UV LED exposure cabinet. Devices from mid-2022. Printhead replaced in 2025. After that, used very little. 1. Computer to Screen – EXILE Spyder II DTS 30″ Lrsdpfoxb Ru Ejx Ahvei • Serial number: 900 100523/182 • Production date: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 • Production date: . RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: used, Duplo Ultra 300A UV Coater with SF-300 Feeder Removed from closed printshop. Was in full working order when disconnected. Would recommend machine benefit from a service. Sold Ex works. Any questions or need more photos please ask. Machine is in stock. Spec The Duplo Ultra 300A UV Coater is a high-speed, heavy-duty flood coating system designed for offline finishing of offset and digitally-printed materials. It standardly includes the high-capacity SF-300 Suction Feeder to handle production-level volumes. Core Technical Specifications The system is engineered to match the speed of modern digital presses while maintaining high-quality finishes. Maximum Speed: Up to 148 feet (45 metres) per minute. Maximum Paper Size: 20” x 28” (508 mm x 712 mm). Minimum Paper Size: 8.5” x 11” (215 mm x 280 mm). Paper Weight: 200 to 350 gsm. Lsdjymgumepfx Ahvsri Coating Types: Applies High Gloss, Satin, or Matte finishes. SF-300 Suction Feeder Specifications The SF-300 Suction Feeder is the standard feeding unit for the offline "A" model. Feeder Capacity: 7.5-inch pile height or approximately 90 lbs of paper. Feeding Mechanism: Top-feeding air suction belt designed for difficult or heavy stocks. Detection: Built-in double sheet detector to prevent jams and coating errors. Weight: The feeder itself weighs approximately 305 lbs

Year of construction: 2022, condition: used, This is an Ultravent hood from the manufacturer Rational, model UV 61/101/E/CD, year of manufacture 2022. It is suitable for iCombi Classic and iCombi Pro units of the following index series: Index H and I, and can be used for both DUO units and single units. The hood has been inspected in our in-house workshop and is fully functional, including the appropriate connection kit. The original retail price (net) of the hood is €5,135. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service provider. Are you looking for a specific Rational model? Contact us – we have access to an extensive range of used and new equipment. We are happy to advise you on all model types. Our used equipment service for you: • 6-month warranty on electrical components, limited to the replacement of defective parts; installation and removal costs not included • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Inspected & fully functional – or your money back • Shipping or collection available by arrangement • Expert advice – before and after your purchase • Provision of operating manuals, wiring diagrams & spare parts • DGUV V3 safety inspection conducted Technical Data: • W x D x H: approx. 854 x 970 x 313 mm • Serial number: ET1UA22095059679 • Year: 2022 • Power supply: V: 200 - 240 / Hz: 50-60 • Weight: approx. 95 kg Condition: Used, tested, fully functional Lsdpfx Ahjyhmw Djvjri Shipping: • Delivery or collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations only by arrangement Subject to change and error. Do you have any questions, need advice, or would like to view the equipment onsite? You can reach us by phone during our business hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively based on our General Terms and Conditions (GTC).