Used Uv Curing for sale (1,174)

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Fodpfoww Iu Rsx Ac Nsfu

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Fedpfx Aou Afz Rsc Nsfu

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Fsdpfxjxz Ewns Ac Njfu

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Fedpjxmkctefx Ac Nefu

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 Watts Demonstration machine, with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very easy to operate - switch on and start working - UV laser source with 20 Watts for high-contrast and fast marking with extremely high resolution - suitable for engraving almost all metals (stainless steel, brass, aluminium, etc.) - suitable for engraving almost all plastics (including PVC, silicone, etc.) - suitable for engraving real glass (including crystal glass) - capable of cutting real glass - heavy-duty industrial quality - complete system / ready for immediate use - working area approx. 500 x 600 x 600 mm (W x D x H) - clamping surface with threaded inserts on a 50 mm grid - LED workspace lighting - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - incl. foot pedal to start the engraving process Sale to businesses only. Delivery / consulting / sales only within Germany / Austria / Switzerland. Ffedsflrnajpfx Ac Nou Please also ask about our attractive leasing/financing options. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent Hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric, from model year 2011 to current (Index H+I). The hood was tested in our in-house workshop and is fully functional. Fodpfx Acowd Ixcj Njfu The hood has dents and scratches on one side panel due to improper transport. This does not affect the function of the hood, but for this reason, we are offering it at a special price. The RRP for this Ultra Vent Hood is €3,696 net. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • Professional overhaul / inspection and expert cleaning • Tested & fully functional—or your money back • Flexible delivery or self-collection options • Expert advice—before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 This Ultra Vent Hood features patented condensation technology, which binds and channels vapours and steam. Complex exhaust installation measures are a thing of the past. An external connection is not required at all. Installation is simple and even possible retrospectively. Technical Data: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement • Subject to change and errors excepted Do you have questions, would you like advice, or wish to view the item on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fjdpfx Ash Axqusc Nofu On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fedpfeh Ayfpex Ac Nofu

Condition: used, functionality: fully functional, In this offer you buy a used UV LED flatbed printer ‘Mimaki UJF-7151 plus II ’ Object of sale: 1 x Mimaki UJF-7151 plus II with the following equipment: from 06/2021 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing) may show. The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally. Ffedpfx Acjwfqbis Neu

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 82-15796, input voltage: 400 V, total length: 30,000 mm, total width: 4,000 mm, type of input current: three-phase, plate width: 2,100 mm, plate length: 1,600 mm, Equipment: documentation/manual, See description for all information Fully equipped SAM-X 2-colour machine including feeder, UV dryers, and stacker Year of manufacture: 2001 Ffjdpfeygm Hpex Ac Nju Full information and documentation can be found in the attachments.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Dual Chamber During Oven 1.700 x 1.400mm (2.40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1.700 x 1.400mm (2.40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) General Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Motor power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. Ffsdpfev T I Iqjx Ac Nou The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyer position.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: GE-KEK-100L, Pre-treatment and Powder Coating Line with Curing Oven (1. Pre-treatment Cabin, 2. Powder Coating Booth, 3. Curing Oven) 1. Manual Chemical Pre-treatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: approx. 800 L • Pump/spraying unit: ST 84 HE • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: approx. 1.5 kW • Electrical connection: 3×380/220 V, IP68 protection Ffsdpfx Asygg Rnjc Nou • Manual spray operation, automated circulation, rinsing. Closed system ensures safe chemical handling • Spring-loaded nozzle technology – for pre-treatment directly prior to powder coating Condition: excellent, complete unit, EU-standard control panel, documented operation 2. Industrial Powder Coating Booth Dimensions (external): 1,850 × 1,600 × 2,600 mm • Extracted air: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electrical connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s • Max workpiece size (hanging): 250 mm × 1,000 mm • Spray opening: 1,100 × 1,100 mm Accessories: • Sheet metal construction with transparent panel • Extraction fan + silencer • Compressed air tank + preparation unit • Automatic filter cleaning, powder recycling container • EU-standard control cabinet, pneumatic system + air flow sensor Condition: • Good technical condition, well maintained • Complete documentation and fully operational system 3. Walk-in Industrial Curing Oven for Sale – 1.3 × 1.3 × 2.2 m – 200 °C We offer a professional walk-in curing oven for industrial use, in excellent technical condition! Main parameters: • Usable internal dimensions: 1,300 × 1,300 × 2,200 mm • Curing temperature: 180–200 °C • Curing time: 15–25 minutes • Heating capacity: 2 × 12 kW (electric heating) • Circulated air volume: 1,250 m³/h • Exhausted air: 100 m³/h • Motor power: approx. 1.5 kW • Insulation thickness: 150 mm • Year of manufacture: 2013 Accessories: • Thermally insulated chamber structure with door • Air circulation fan unit • Electric heating elements • Horizontal separator panel • Heat sensor + overheat protection • EU-standard control panel • Air flow sensor • Metal frame Condition: • Regularly maintained, good technical condition • Complete documentation • Ready for immediate operation

Condition: good (used), Year of construction: 2009, functionality: fully functional, Including: • Max. plate size: 940 x 1150 mm • 2 x DMD laserheads • Speed up to 21 plates per hour at 2400 dpi • 1 bit tiff loader • Multi cassette loading • Plate count 251.000 Ffodpsyf Eglefx Ac Neu • Extra spares: 1 x Laserhead, boards, punch • Printing plates stock included

Condition: like new (used), Year of construction: 2024, operating hours: 74 h, functionality: fully functional, The machine has seen very little use and is in technically and visually like-new condition. No continuous or production operation, used exclusively for small batches. Immediately operational, on-site testing possible. Reason for sale: change in business operations. Ideal for start-ups, print shops, or companies seeking a nearly new, ready-to-use UV printing solution. Inspection and collection by arrangement possible. If you have any questions or require further information, please feel free to send us a message or give us a call. Ffodpeyc Hr Dofx Ac Nou

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm Fodpfx Aovupdcsc Nofu - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: excellent (used), Year of construction: 2016, EFI Vutek GS2000Lx Pro - Ultradrop Colour configuration: 4 colours + white Manuf. Year: 2016 Mileage: 150.00m² RIP: NA In production Availability: January 2026 Demo possible Transport and installation in Europe available upon request The EFI VUTEk GS2000LX Pro with UltraDrop Technology is a hybrid flatbed/roll-fed superwide inkjet printer featuring native 7 pL print heads for high-definition quality, LED curing technology, and a maximum print speed of up to 2,000 ft²/hr. It supports both rigid and flexible media up to 80 inches (2 m) wide. Key Specifications Print Technology LED UV-curing, grayscale 7 pL UltraDrop Technology print heads Max. Print Resolution True 600 or 1000 dpi (selectable) Max. Print Speed Up to 2,000 ft²/hr (186 m²/hr) in Fast-4 mode Color Capability 8 colors plus white ink printing (optional clear varnish channel) Max. Media Width 80 in. (2 m) Max. Media Thickness 2 in. (5.08 cm) Media Types Flexible and rigid substrates Ink Type Genuine EFI UV Inks supplied in 5.0-liter containers Automation Single-pass, multilayer print capability; continuous print with less than five seconds between boards Dimensions (WxHxD) 202" x 66" x 63" (without tables) Fsdpfx Ajx Tuyfec Nofu Machine Weight 5,050 lbs. (2,291 kg) Features and Benefits UltraDrop Technology: Offers smaller drop sizes (native 7 pL) and more precise control with true multidrop addressability for outstanding smoothness in shadows, gradients, and transitions, as well as superb four-point text quality. LED Curing: "Cool cure" LED technology extends the range of supported substrates (including heat-sensitive media), increases uptime with instant on/off lamps, and drives down operating costs and energy consumption. Workflow Integration: Optimized for use with the EFI Fiery proServer with Fiery XF production DFE and color management workflow, allowing seamless integration with EFI Web-to-Print and MIS/ERP solutions. Environmental Benefits: The LED system provides a greener printing solution with lower power consumption, fewer consumable parts, less waste, and low VOCs compared to conventional mercury arc lamps.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, controller model: 21i MB, table width: 625 mm, table length: 825 mm, overall weight: 9,000 kg, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Ffjdpfxex Tud Ro Ac Nju Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm Fedpfjx Tpx Ajx Ac Nofu - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, - Location: Bremen The multi N/C pharma UV is a compact device for safe and precise TOC determination in pure and ultrapure waters. It complies with the requirements of the water monograph of the European Pharmacopeia Commission and the monograph of the United States Pharmacopeia Convention (USP), making it particularly suitable for water monitoring in the pharmaceutical industry, as well as for water monitoring in the semiconductor industry. Ffedpfohzxizex Ac Nju The multi N/C pharma UV operates on the principle of wet chemical UV oxidation combined with highly precise and CO2-selective NDIR detection. Various technical documents as well as an English-language operating manual are available.

Condition: new, Year of construction: 2025, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] Fjdpfefhv Tlex Ac Nofu 4 Substructure Steel profile 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces the current laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials. New model: PS1812 Ffedpoga U Tdofx Ac Nsu C M Y K LC LM + White + Varnish or with Double CMYK + WWWW (White) + VVVV(Varnish) Printhead: Epson TX800 2690 dpi max. Including software for printer and image processing Dimensions: approx. 260cm(L) x 160cm(W) Weight: 750kg Print area 1800x1200 and with a print height of 150mm

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Print head: Epson TX800 2690 dpi max. Including software for printer and image processing Ffodpfxsfbmgfj Ac Neu weight: 90kg Operating display Table movement through screw technology 360 degree use possible on request: for bottles and round objects A2 size 45x65cm and 20cm height possible Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces the current laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials. New model: PS1612 C M Y K LC LM + White + Varnish or with Double CMYK + WWWW (White) + VVVV(Varnish) Printhead: Epson TX800 2690 dpi max. Including software for printer and image processing Dimensions: approx. 240cm(L) x 160cm(W) Weight: 650kg Fsdpfxoga U Taj Ac Njfu Print area 1600x1200 and with a print height of 150mm

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the usual laser printers - also coloured prints on glass, wood, textiles, plastic, metal and many other materialsNew model: PS10157VC M Y K LC LM White varnish option inclusive print head: Epson TX8002690 dpi max. inclusive software for printer and picture processingDimensions: 2.30*1.98*1.34mWeight: 650kg360 degrees Use: Bottles/round objects(surcharge)A1 Size 100x150cm and 170mm print height8x500ml Colour can be supplied!(surcharge) LACK FUNCTION Including software Adjustment and printer explanation gladly on demand. Germany/Europe-wide. (Surcharge)Print videos etc. can be sent by Mail/WhatsApp... Ffodpfxod Hydho Ac Neu

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer digital flatbed printer - replaces the current laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials. Easy peeling and sticking on many surfaces! New model: UV4060DTF Printhead: Epson TX800 2690 dpi max. Ffjdpfxsg Icd Se Ac Nju Including software for printer and image processing Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height possible 5x500ml color can be included!(extra charge) Software setup and printer explanation gladly if needed. Germany/Europe. (Surcharge) Print videos etc. can be sent gladly by Mail/WhatsApp.