Used Upper Carriage for sale (4,843)

Condition: used, maximum load weight: 15,880 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 07/2014, total width: 2,500 mm, total height: 3,100 mm, * Spezialanhänger - Winterdienst- Blenkle IMS 3- Wechselsystem * Wechselaufbau Küpper Weisser Iedpfsyvwpzox Aa Esaw * Full Wet * Solestreuer * Thermomat * IMSSN S00100 HFV * Aufbau BJ. 2014 * Aufbau 2165 kg Gewicht * 7 x Einzelbehälter * Einzelbefüllung * Zentralbefüllung * Zentralentleerung * Rundumlicht * Warnleuchten * Wechselfahrgestell mit BDF Aufnahme * Hersteller Blenkle Fahrzeugbau * Typ IMS 3 * Luftfederung * Mercedes Achse * 50 ziger Zugöse * Zugdeichsel höhenverstellbar * Zwillingsreifen * 265/70R198,5 ca. 70-80% * 21000 kg GG * Behördenfahrzeug * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, color: orange, empty load weight: 430 kg, machine/vehicle number: 3658, We are offering a salt spreader from Küpper Weisser (internal number 3658). Type: IMSSE J18018H Serial number: 130266 Year of manufacture: 2013 Unladen weight: 430 kg Ijdpfx Aeiv U D Hsa Eoaw The salt container has a capacity of approximately 1.8 m³. The spreading width and spreading rate can be easily adjusted during operation via the control panel. The spreader was mounted on a UNIMOG and used by us. However, before the winter service season, it was carefully treated with an anti-corrosion agent in our workshop, resulting in minimal corrosion. It has only a minor defect: the mounting of the spreading disc is broken and needs to be welded. This can be done at our workshop when you pick it up. Otherwise, the machine is in good condition and can be put into service immediately.

Condition: used, mileage: 10 km, first registration: 01/1994, Year of construction: 1994, Salt spreader superstructure for trucks, manufacturer Küpper-Weisser---- * Type STA HD * Volume 4 m² * Year of manufacture 1991 * Drive 1D90FS V01 * Includes tanks for brine, left and right * Drive system: hydraulic Spare parts donor – all individual parts are for sale Individual parts also available for sale, set of support legs for sale Errors and omissions excepted! Iasdpfx Aoi Sfmtja Ejw

Condition: used, mileage: 1 km, first registration: 05/2000, * mehrere Schneepflüge, Beilhack, Küpper Weisser, Drutzel, Schmidt zu Verkauf, Paketverkauf möglich Iaedpfjx Im Uwox Aa Eew * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp

Condition: excellent (used), Friction wheel, running wheel for bridge crane, hall crane, assembly crane, workplace crane -Wheel: for crane chassis .: 1031 4146 -Type:500h11 Part 1 Crane Chassis -Tread diameter: 500 mm -Wheel intermediate size: 90 mm -Hole: Ø 165 mm -Quantity: 2 pieces available -Price: per piece Ijdpov Hb U Djfx Aa Ejaw -Dimensions: Ø 540 x 120 mm -Weight: 172 kg/piece

Condition: good (used), Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub -Flange hub: for crane chassis .: 2003 9116 suitable for gearbox ID 34705 / ID 34752 -Type: 75H7 Part 368 SDDL-5-200 Iaedpfxev Hmc Hj Aa Esw -Hole: Ø 75 mm -Bolt circle: Ø 170 x 15 mm -Quantity: 2x pieces available -Price: per piece -Dimensions: Ø 200 x 170 mm -Weight: 14.7 kg/piece

Condition: good (used), functionality: fully functional, Year of construction: 1996, PVC PROFILE HAUL-OFF UNIT, CONTACT LENGTH 3000X280MM, EQUIPPED WITH 2 NEW AC MOTORS CONTROLLED BY AN INVERTER, AND PNEUMATIC UPPER BELT CLAMPING SYSTEM. Iedpezbq Utofx Aa Eeaw

Condition: as good as new (ex-display), functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, total length: 6,535 mm, total width: 1,340 mm, total height: 2,901 mm, overall weight: 1,100 kg, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, It just keeps running – in countless businesses. Day after day, meter by meter, the STRIEBIG STANDARD saw cuts the most diverse panel materials. Always with the highest precision, always with sharp edges and dimensionally accurate cuts. Universally applicable for a variety of panel materials: Whether chipboard, OSB, MDF, acrylic glass, composite, or plastic panels, the STANDARD enables precise cutting of various materials. Self-supporting, solidly welded construction with hardened guides – these have always set the STANDARD’s saw frame apart. This frame, the heart of every STRIEBIG panel saw, has been continuously improved over the years. The absolute parallelism between the upper guide rail as well as the center and roller support ensures cutting precision is maintained over many years. Additional technical data: Cutting height: vertical: 2240 mm | horizontal: 2100 mm Emission sound pressure at the workplace: 79 dB Saw blade speed: 4750 rpm Iasdjwztyaopfx Aa Eew Compressed air connection: 6 - 10 bar Rated power consumption: 7.3 kW Comprehensive standard equipment: Heavy-duty, self-supporting, rigidly welded, torsion-resistant saw frame Sturdy, long-lasting steel support beam construction Robust mounting of the motor carriage ensures high cutting precision Powerful, high-torque 5.5 kW motor (7.5 HP) TRK dust extraction Model TRK 2 with automatically retracting aluminum slatted frame and plastic supports Bracket for wall mounting 17-position roller support with 3 foot brakes (Model 6224) Strip stop for repeat cuts Program cam switch for recurring dimensions Small parts tray made of aluminum Supersilent sound insulation to reduce saw blade noise Mechanical motor brake Optional equipment: Striebig paper holder Striebig complete aluminum small parts tray Includes delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Year of construction: 2011, condition: ready for operation (used), Offered is an Altendorf sliding table saw. Max. saw blade diameter: 400mm, max. cutting height at 90°: 125mm, max. cutting height at 45°: 87mm, cutting width: 1000mm, double roller carriage length: 3000mm, saw spindle speeds: 3000/4000/5000rpm, lower dust extraction port: 120mm, upper dust extraction port: 80mm, central dust extraction port: 140mm, riving knife guide slot width: 13mm. Weight: approx. 1100kg. Inspection by appointment possible. Iaedpfezl En Isx Aa Esw

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Ijdpedy Hm Njfx Aa Ejaw Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: excellent (used), Year of construction: 1990, ALTENDORF F45 tilting circular saw with scoring unit Iasdszipw Ijpfx Aa Esw Scoring unit Double roller carriage, tilting, parallel fence Extension table, table extension, anodized aluminum, table widening, anodized aluminum, upper guard, narrow and wide ----- Technical data ----- Tilting range: 45°, carriage length: 3,200 mm, cutting width: 1,250 mm, max. saw blade diameter: 450 mm, motor power: 5.5 kW, 3 speeds dust extraction port diameter: 80 / 120 mm Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2018, Storage location number: 100325836 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Reach: 62.5m Including counterweight Hoisting mechanism: 45kW 120HC counter-rotating upper carriage Full-view cab Including radio remote control with feedback Including undercarriage with 4.6m track width, including spindles and support plates 2x 12.5m tower Including central ballast Iodezkz Nlepfx Aa Eoaw Location: Nuremberg

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Isdpfx Aasyyap Ee Eeaw

Condition: used, Year of construction: 2024, lifting height: 2,760 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 3.500 kg Iajdpfx Aaswn Hr Ns Eow Functional Lifting capacity: 200 kg Working height: 1.050 cm Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Transport dimensions (LxWxH): 6,16x2,02x2,76 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elévateur Model: Topy 10.2 Year of build: 2024 Condition: Used Data: Gear type: manuell Max. working height: 10,50 m Max. platform height: 8,50 m Max. reach (200 kg): 4,80 m Total dimensions LxWxH: 6,16 x 2,02 x 2,76 m Platform dimensions (outside) LxWxH: 1,00 x 0,75 x 1,11 m Max. basket load: 200 kg Max. Number of people: 2 Swivel range of the upper carriage: 2x 200° Engine: Mercedes Benz Displacement: 1.950 cm³ Performance: 110 kw Colour: weiß Driving license class: B / 3 Own weight: 3.500 kg Special features: insulated work basket, socket in the basket, AdBlue.

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven Isdpsy Tn D Defx Aa Ejaw - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings Iajdpsy H N I Defx Aa Eew - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 50 mm 8,5 U/min 100 kN Iodpfsy H N Hmjx Aa Eoaw roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg Iedpfx Aoyv N A Hea Esaw range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Isdswu Tu Dopfx Aa Esaw Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. Isdpfx Aozkkf Aea Esaw • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2023, For sale is a professional, two-spindle multi-blade saw, model WP 165, designed for efficient longitudinal cutting of wood. This machine is ideal for sawmills and facilities producing packaging components, pallets, structural timber, boards, and garden elements. Thanks to the use of two parallel spindles with a set of circular saw blades, the machine provides high performance, precise cutting, and uniform blade wear. The adjustable spindle carriage allows for adjusting the spindle position, which ensures optimal tool load during operation. Material transport is carried out using four pairs of driven rollers, which ensure secure guidance of the timber. The clamping force is pneumatically adjustable, allowing for stable cutting of both dry, wet, and frozen wood. The machine's design guarantees straight cuts even when processing long materials. Depending on the type of wood, its moisture content, and the number of cuts, the output is approximately 10–18 m³ of wood per hour. TECHNICAL SPECIFICATIONS: - Model: WP 165 - Type: Two-spindle multi-blade saw - Maximum blade diameter: 300 mm - Maximum distance between outermost blades: 320 mm - Minimum cutting thickness: 30 mm - Maximum cutting height: 165 mm - Maximum timber width: 500 mm - Minimum material length: 700 mm - Spindle speed: 3350 rpm - Feed rate: 30 m/min - Main motor: 90 kW - Second spindle motor: 75 kW - Feed drive motor: 2.2 kW - Power supply: 3 × 400 V - Pneumatic system pressure: approx. 0.4 MPa (4 bar) - Sawdust extraction: lower – by conveyor or pneumatically, upper – pneumatically. - Year of manufacture: 2023 Machine dimensions: - Width: 1950 mm - Height: 1640 mm - Length (without tables): 1960 mm - Equipment: two-spindle blade set, driven material feed, pneumatic material clamping, infeed table included. This machine is a robust construction designed for intensive operation in a sawmill. The high drive power (90 kW + 75 kW) allows for efficient cutting of thick timbers with high throughput. Please contact us by phone. Machine viewing is possible by prior arrangement. - Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Ijdpjzkg Iysfx Aa Ejaw Lublin Voivodeship It is possible to test the machine on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT We also offer a wide selection of woodworking machines, including: panel saws, band saws, and circular saws, planers, jointers, milling machines, grinders, edge banding machines, four-sided planers, drills, presses, lathes, dust extractors, and many other devices from reputable manufacturers. Our range includes machines from brands such as: ALTENDORF, SCM, MARTIN, FELDER, HOLZ-HER, ROBLAND, WEINIG, CASADEI, BRANDT, MAGGI, SAC, STETON, HOUFEK, IMA, OTT, BÜTFERING, HEBROCK, BERNARDO, HOLZMANN, and many others.

Condition: used, mileage: 55,600 km, power: 95 kW (129.16 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine type, dimensions, or other specifications? Iedpszkc Ngjfx Aa Eeaw Feel free to contact us. We offer financing and leasing at attractive conditions – also available for the Netherlands, Austria, and new business founders! Vehicle: Ford Transit * Manual transmission * Single rear tires * Low roof Technology & Comfort: * Air conditioning (R134a) * Digital radio DAB with USB * On-board computer * Cruise control * Leather steering wheel * Steering wheel with radio controls * Electrically adjustable and heated exterior mirrors * Electric windows * Central locking with remote control * Heated driver's seat * Heated passenger seat * Driver's armrest * Passenger armrest * Driver's seat, 4-way adjustable * Passenger seat, 4-way adjustable * Manual lumbar support for driver * Manual lumbar support for passenger * Overhead console * Glasses compartment * Tablet holder * USB port * Microphone * Lockable glove compartment * Tinted windows * Auto-dimming interior mirror * Pollen filter * Chrome front grille * Driver information display * Programmable interface module (PIM) Safety: ESP * Hill start assist (HLA) * Driver's airbag * Halogen headlights * Fog lights * Daytime running lights * Side marker lights * High-performance battery (AGM) * High-performance generator * Automatic door locking * Two-stage door locking system * Seatbelt pretensioner for driver * Seatbelts with automatic retractor * Mechanical parking brake Aerial work platform: France Elévateur TOPY 11 * Working height: 11.00 m * Platform height: 9.00 m * Maximum lateral reach without outriggers: 6.00 m * Load capacity: 120 kg / 1 person * Work platform 850 × 780 × 1,150 mm * Upper carriage rotation angle 400° * Steel boom with 1 telescopic element * Energy supply in the telescopic boom * Electro-hydraulic emergency control * Hand emergency pump * Return-to-transport-position indicator in the cab * Hour meter * Max. operating inclination: 5% * Max. operating slope: 15% Additional extras for the superstructure are available at an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Customized superstructure possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are subject to change. Sincerely, Pimenta Automobile

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Iasdpfjvvkipex Aa Eow

Condition: used, functionality: fully functional, machine/vehicle number: 34104, mileage: 21,490 km, power: 290 kW (394.29 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 33 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles on offer may vary, as some units are currently in rental use! Further comparable vehicles available upon request. Iaedpfxoyc Scnj Aa Ejw M2Q engine: OM470, inline 6-cylinder, G2B transmission G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane keeping assist, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5. MirrorCam, comfort driver’s air suspension seat, functional co-driver’s seat, multimedia cockpit, navigation system, digital radio, air conditioning. Rear section: "L-Kelpie" net loading volume 33 m³; net hopper volume: 9.6 m³; packing plate with floor scraper; hydraulic folding cab protection roof; GRP driver’s cab roof guard; follower panel with inverted cab protection cover; third hatch as wind deflector, Sulo lid opener; quiet, low-wear rotary vane pump; ergonomic control panel, all loading functions operated with a single control lever (joystick) and operator guidance via colour display; discharge function operable from the cab; self-diagnosis system with plain text display; fork carriage, adjustable on both sides (adjustment range 1,280mm-1,890mm) with integrated 1.1 mount (bins to EN 840-2/3); LED arm position marker lights, no turn signal; 2 arm guide rollers in tipping position; 1x LED rotating beacon on the upper rear; 1x LED work light at charging hopper; 1x LED work light behind the cab; 2x LED gooseneck lamps, lower marker lights; 2x LED upper marker lights; 1x LED rotating beacon rear lower right; 2x LED strobe lights front under the protective cover; 2x LED work lights at the front; LED surround lighting with 15 km/h automatic shutoff; 2x LED reverse lights on both sides, linked to reverse gear; central lubrication system incl. electric pump; camera system—front camera, rear area monitoring, and roof camera for the hopper; radio remote control with positional binding; engine speed adjustment via remote control; contour marking; holders for shovel and broom; aluminium ladder with climb limiter; 2x class A markings; MOBA fork scale.

Condition: used, functionality: fully functional, machine/vehicle number: 34103, mileage: 28,900 km, power: 290 kW (394.29 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 33 m³, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles on offer may vary, as some units are currently in rental use! Further comparable vehicles available upon request. M2Q engine: OM470, inline 6-cylinder, G2B transmission G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane keeping assist, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5. MirrorCam, comfort driver’s air suspension seat, functional co-driver’s seat, multimedia cockpit, navigation system, digital radio, air conditioning. Rear section: "L-Kelpie" net loading volume 33 m³; net hopper volume: 9.6 m³; packing plate with floor scraper; hydraulic folding cab protection roof; GRP driver’s cab roof guard; follower panel with inverted cab protection cover; third hatch as wind deflector, Sulo lid opener; quiet, low-wear rotary vane pump; ergonomic control panel, all loading functions operated with a single control lever (joystick) and operator guidance via colour display; discharge function operable from the cab; self-diagnosis system with plain text display; fork carriage, adjustable on both sides (adjustment range 1,280mm-1,890mm) with integrated 1.1 mount (bins to EN 840-2/3); LED arm position marker lights, no turn signal; 2 arm guide rollers in tipping position; 1x LED rotating beacon on the upper rear; 1x LED work light at charging hopper; 1x LED work light behind the cab; 2x LED gooseneck lamps, lower marker lights; 2x LED upper marker lights; 1x LED rotating beacon rear lower right; 2x LED strobe lights front under the protective cover; 2x LED work lights at the front; LED surround lighting with 15 km/h automatic shutoff; 2x LED reverse lights on both sides, linked to reverse gear; central lubrication system incl. electric pump; camera system—front camera, rear area monitoring, and roof camera for the hopper; radio remote control with positional binding; engine speed adjustment via remote control; contour marking; holders for shovel and broom; aluminium ladder with climb limiter; 2x class A markings; MOBA fork scale. Iaedpjyc R U Nofx Aa Ejw