Used Ultrasonic Device for sale (11,654)

Condition: good (used), Year of construction: 2018, Internal item no.: 25119 Mobile Surface Roughness Tester Nsdpfxoyqzwko Ahvjwd Mahr Marsurf PS10 Year of manufacture: 2018 The measuring device is fully functional and can be inspected under power by appointment in a heated storage area of over 500 m².

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Nwjdeyqr Sxspfx Ahvod

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Njdpfx Ahjypw Hrjvjwd Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: excellent (used), Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device, unused Nedpev Hxw Asfx Ahvowd -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Quantity: 4 pieces available Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, Ultrasonic cleaning device Glogar Ultrasonic 600H Tank capacity max.: 58 litres Basket dimensions (usable): 400 x 255 x 220h mm Internal tank dimensions: 500 x 330 x 350h mm Outer dimensions of the unit: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power eff./max.: 900 / 3.600 Watt Heating power: 2.800 Watt Sweep: yes Pulse: yes Degas / Autodegas: yes Drain/diameter: 3/4 basket load: 25 kg Included in delivery is 1 stainless steel basket and 1 noise protection lid. Delivery ex works (FCA), AT-4490 St. Florian b. Linz Device is produced in Germany! Nedpfx Aofk Tt Ijhvewd OTHER DEVICE DIMENSIONS AND DESIGNS ON REQUEST.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale: industrial 4-chamber ultrasonic washer Skymen JTM-4060GDH, purchased new in 10.2024 directly from the manufacturer. The machine was purchased as a temporary solution before the delivery of a vacuum cleaning system and was used only briefly during commissioning tests. Condition: as new / excellent. The washer is designed for precision cleaning of machined metal parts, removal of machining oils, chips and fine particles after turning, milling or grinding operations. The system consists of four independent chambers, enabling a complete cleaning process including washing, rinsing and drying. Machine configuration: Ultrasonic washing chamber • ultrasonic power: 1500 W (30 transducers) • frequency: 40 kHz • heating power: 3 kW • operating temperature up to 95 °C • circulation filtration system • dynamic lifting system (“throwing up & down”) for improved cleaning efficiency Ultrasonic rinsing chamber • identical ultrasonic configuration as washing chamber • independent filtration system Rinsing chamber Nedpfx Ahsyt Elqsvjwd • tank capacity approx. 99 L • heating power: 3 kW Hot air drying chamber • high-efficiency air blower • heating power: 3 kW • temperature control Additional features • separate liquid supply and drainage for each chamber (no cross-contamination) • compatible with industrial cleaning chemicals • stainless steel baskets included • drain valves and water level sensors • electronic control system Construction • stainless steel AISI 304 • wall thickness: 2 mm Technical data • manufacturer: Skymen • model: JTM-4060GDH • year of manufacture: 2025 • dimensions: 2880 × 1350 × 1180 mm • weight: approx. 480 kg The machine is supplied with full technical documentation and certificates (CE / ROHS / FCC / ISO 9001). Ideal for CNC machining companies, precision metal parts production, automotive and medical component manufacturing. Machine location: Poland Inspection possible by appointment.

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge Nwsdpsh Ramgsfx Ahvjd - Adjustable stroke

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Nedpfexzuxnex Ahvowd Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Nwjdeyty E Eopfx Ahvjd Load centre: 600 Mast type: Triplex Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out!

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, overall weight: 100 kg, total length: 700 mm, total width: 450 mm, total height: 1,350 mm, machine/vehicle number: 101, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operating pressure: 6 to 7 bar MACHINE DETAILS Serial number: 101 Length: 700 mm Width: 450 mm Height: 1,350 mm Weight: 100 kg Nwodeyn Epropfx Ahvsd EQUIPMENT Base frame

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 105, total height: 1,200 mm, total length: 900 mm, total width: 400 mm, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid requires timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Nodpsyn Epfofx Ahvswd Pressure: 6/7 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT Base frame External reference: Groven – Lot 15

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 08649020, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 100 mm Weight: 10 kg External reference: Lot 18 / L.Schaible Nodpfx Ahoyn Eb Uevjwd

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 0500230, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 2.2 kW Nedpfx Aheyn Aabovswd Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg External reference: Pieper - Lot 86

Year of construction: 2012, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 3820120600272, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates collection on time either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Nwodpeynz T Hofx Ahvjd TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 5.6 A Connected load: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg External reference: Pieper - Lot 87

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Nedpfoytr Swox Ahvswd Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Nwsdpfeytn Hkox Ahved Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Nwodpevkdkijfx Ahvsd Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Njdpfov Nztxex Ahvewd Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 Njdpsyc Nzuefx Ahvswd • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Nodpfxjxtwxuj Ahvswd

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: Nwedpfjxn Awxox Ahvsd • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; Nedpfxep Stgnj Ahvowd - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Njdpjh Aw Rnjfx Ahvowd Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: good (used), Year of construction: 1991, material Stahl weight 300 kg turning speeds 1400 U/min motor 75 kW The Höcker Polytechnik L 300 industrial blower, built in 1991, impresses with its robust construction and an impressive air flow rate of 7,200 m³/h. With a 7.5 kW motor and a speed of 1,400 rpm, it is ideal for extraction and conveying tasks in workshops, production facilities, and filter systems. Nwjdoynmp Hopfx Ahved The fan runs reliably, is designed for durability, and comes from a renowned German manufacturer. Perfect for anyone looking for a solid and powerful solution for air and material transport.

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: P3000-03-10-04798, pressure: 5.5 bar, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates collection within the specified periods, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Pressure: 5.5 bar MACHINE DETAILS Voltage: 115/230 V Frequency: 50/60 Hz Power: 120 VA Dimensions & Weight Dimensions (L x W x H): 550 x 300 x 700 mm Machine weight: 30 kg Nodpoyniyzofx Ahvewd External reference: Lot 1 / Wittner