Used Tyre Machines for sale (71,966)

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Rsdpfx Ahjv Dpy Njvjbw Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR Rbedetrd T Tspfx Ahvew 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), Year of construction: 2016, machine/vehicle number: 30339, Wickman 6-57 CNC Multi-Spindle Screw Machine Rsdpfx Ajuzlltjhvjbw SN: 30339 Mfd. 2016 Siemens CNC control Motors and controls Stock stand and stock reel with enclosure (2) 2-Axis CNC Slides in Pos. 4 and 5 Single Axis CNC Turret Single Axis CNC Auxiliary slides pos. 4th + 5th Turbo Chip Conveyor Machine configured as follows Pos. 1: Mechanical cross slide, Turret open Pos. 2: Mechanical cross slide, Turret open Pos. 3: Mechanical cross slide, Turret open Pos. 4: 2-Axis CNC Slide, Auxiliary single Axis Pos. 5: 2-Axis CNC Slide, Auxiliary single Axis Pos. 6: Mechanical cross slide, programable pick-up turret is single axis CNC With (6) Collet tubes Sold as-is where-is condition from current location. Buyer is responsible for shipping and rigging.

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE Rbedjvn T Daepfx Ahvew 3 Spindle Machining Center Mfd. 2020 SN: 101262 Control: Fanuc Panel i Chip Conveyor

Condition: used, machine/vehicle number: 008490, X axis working area: 3657 mm Y axis working area: 1524 mm Working Table: Flat table Main Electrospindle power: 12 KW Rjdpfxsyxmwao Ahvsbw Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm Redpog E Th Sefx Ahvobw No of Top Units: 2 Lateral horizontal groups: yes

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Rbodpfx Ajxh Rqtjhvew Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS Rodpfx Ahjvr Hf Ejvobw The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 2011, controller manufacturer: Sonstige, controller model: BasicControl, _____ Rbsdpfx Ajyx Rmfjhvjw Description: Year of manuf. : 2011 In general: Cutting range Roundmaterial:ø360 mm Cutting range Squarematerial:360 x :360 mm Cutting speed:15-150 m/min Equipment/Accessory: Rawmaterialfeed:Roller conveyor, additional Finishedpart removal:Delivery table Chipmanagement:Chipconveyor Coolantmanagement:Coolant pump Bandsawcleaning:Wire brush, opposed

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Rbjdpfx Ajq Nipyjhvsw Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Rodpsyw Inqjfx Ahvjbw Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Upperroll diameter: Ø 137 mm Lowerroll diameter: ø 132 mm Bending capacity: 50 x 10 mm flat steel 40 x 40 x 3 mm square Ø 30 mm round Driven rolls: 2 Rolling speed: 2,1 - 4,3 m/min. Control: Footpedal left/righ turning Redpfx Ahsyw Ipnjvjbw Supplied with: 5 sets of rolls Footpedal Machine manuals Country of origin: Turkey Motor power: 0.75 kW Machine (l×w×h): 53 × 67 × 135 cm Machine weight: 190 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Redpfxoyac Tlj Ahvobw Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: good (used), functionality: fully functional, total height: 1,600 mm, total width: 700 mm, total length: 1,000 mm, grinding length: 250 mm, grinding width: 150 mm, grinding spindle speed: 3,150 rpm, disc diameter: 200 mm, Grinding stone diameter: 200 mm Clampingtable: 250 x 150 mm Diameter magnetictable: 120 mm Spindle speeds: 11 - 3.150 Rpm Country of origin: Italy Machine LxWxH: 1.000 x 700 x 1.600 mm Redpeyg E Ursfx Ahvjbw Machine weight: 250 kg

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Rbjdpfsyncppex Ahvsw Features and technical specifications: - With line drilling head with 7 spindles and locating pins - Spindle pitch: 32 mm - With drilling head for BLUM hinges - With drilling head for Hettich hinges - With the respective pressing dies - Motor: 400 V, 0.75 kW, 2800 rpm - With stop bars Availability: short notice Storage location: 63934 Röllbach

Condition: used, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Rbodewwxykepfx Ahvsw Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device Rbjdpfx Ahewt E Tvevew 2D barcode scanner Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Location: Flörsheim

Condition: like new (used), Year of construction: 2010, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Rbsdpfoyf Rrmex Ahvjw Technical features Dimensions Table dimensions: 8500 x 2500 mmNumber of T slots: 17T slots dimensions: 22 mm Traverses of axis X axis traverse: 8000 mmY axis traverse: 3800 mmZ axis traverse: 1500 mmVertical capacity (VC): 168 / 1668 mmDistance between columns: 3100 mm Milling head Auto-indexing differential head (UAD - 0,02º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871) / Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 35000 kgMachine weight approximate: 79000 KgMachine dimensions approximate: 22700 x 7660 x 6800 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceAutomatic tool changer: ATC-60Chip conveyor: 2longitudinal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2000, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-410-M Technical features Dimensions Table dimensions: 2000 x 700 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 800 mmZ axis traverse: 800 mm Milling head Head type: Universal manual (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN2080) / Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 17 kW Feedrates Feedrate: 5 - 5000 mm/minRapid feedrate: 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approx.: 9000 kgMachine dimensions approx.: 5265 x 3250 x 2760 mm Accesories External coolantElectronic handwheel: HR-130New foot clamping tool rding and new perimetral safety fence installation Sales conditions Warranty: 6 months mechanical partsSale conditions and price: On request View all technical features Rbedsyf Rr Hopfx Ahvsw

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Rbjdpfx Ahsyx Na Revew

Condition: used, Epson's first linehead, inkjet label press with LED UV curing ink, the L-6034VW/L-6034V enables high-speed printing that's ideal for short-to mid-run jobs, producing labels with outstanding scratch and weather resistance.  Digital Label Press Epson SurePress L-6034 Baujahr / Year 2016 - Serial-No. TE90010012 Bildgröße / Image Size max. 330 x 1000mm Bahnbreite / Web Width 80 - 340mm Substrate Support PP, PE and PET, coated paper, cast coated paper, and uncoated paper Substrate Thickness 3.14 - 12.60 mils (80 to 320 microns) Printing Technology PrecisionCore linehead inkjet technology Quick-drying UV ink Epson UV Ink / LED-UV-härtender Tinte White Ink Circulation System Automated control and in-line inkjet nozzle testing CMYK, White, and Multi-varnish inks installed in-line Maximum Print Resolution 600 x 600 dpi Print Speed Up to 49.21 ft/min (15m/min), Up to 24.61 ft/min (7.5m/min)  Redoyx Ir Sepfx Ahvjbw Ink Type LED UV Curing Inks Ink Configuration Black, Cyan, Magenta, Yellow, Multi-Varnish, White Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2001, plate thickness 6 mm pressure 3 kW blade length 200 mm table dimension - longitudinal 1000 mm table dimension - cross 860 mm stroke of worktool slide 60 Hub/min angle adjustable from - to 30 - 140 Grad total power requirement 3 kW Redpfjyx Itisx Ahvjbw weight of the machine ca. 1050 kg dimensions of the machine ca. 1000 x 1300 x 1350 mm

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Rbsdpfjif Sg Sex Ahvew Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: good (used), Year of construction: 1991, Working width 510 mm Rjdpfoyx Iq Iex Ahvobw Working height 200 mm Motor output 5,5 kW Length of the planing table 2250 mm Number of knives 4 St. Feed speed 7 / 14 m/min. Dust suction hood 160 mm machine weight ab. 1000 kg

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Redpfx Ahjynmpyevsbw Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg