Used Twins for sale (2,810)

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Bledpfx Ajlrqiqedrsi Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Year of construction: 1988, condition: used, machine/vehicle number: 8829-III, max. temperature: Vorwaerm-/Haertekammer 1000/1350 °C electrical connection: 380 V kW dimensions of the machine: 1150 x 1500 x 1840 mm Blsdpfxj Rxa Ns Adroi weight: gesamt ca. 900 kg heating capacity: Vorwaerm-/Haertekammer 9/25 kW

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Bsdpfoy Anuhjx Adreli

Condition: not inspected (used), Year of construction: 2009, operating hours: 12,500 h, overall weight: 2,500 kg, power: 22 kW (29.91 HP), Used shredding machine designed as a twin-shaft shredder blade 30 mm drive 22 KW we currently have 4 used machines in stock with control system and partly installation frame and hopper. Blodpera A D Tsfx Adrji

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter Bedpfjyc Sfpex Adrjli The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Bjdpfxsyztags Adrjli Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, number of axes: 6, spindle speed (max.): 24,000 rpm, This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details. • Rotary axes: B rotation = no limit; C rotation = 400° • Rapids/axis speeds: X = 100 m/min; Y = 60 m/min; Z = 60 m/min • Milling: 4 milling heads, 0–24,000 rpm, ER32 mounting, max tool diameter 200 mm • Workholding/table: 2 tables • Condition: Fully working Additional equipment Bljdpfx Adsyuf D Norji • 2 vacuum units • Dust and noise protection cabinet

Condition: good (used), ASTA 500l Twin holding vessel Bedpjqlaffsfx Adroli Stainless, 500l holding tank (two 250l), jacketed, pneumatic tilt to discharge, mobile

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression Bodpfx Adsw Elbdereli - Conveyor belt speed control - Self-propelled chassis for semi-trailer

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment Bledpfx Aeyaqr Ajdrji • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH twin-shaft concrete mixers are industrial mixing systems that combine high efficiency and durability. Thanks to their robust chassis structure, powerful twin-shaft mixing mechanism, and optimized paddle arrangement, they homogenously blend all aggregate, water, and cement mixtures. This allows for the production of high-strength concrete with a low water/cement ratio while minimizing mixing time. The mixer's spiral mixing system directs aggregates towards the center, ensuring complete uniformity and enabling the production of concrete of consistent quality in every batch. Its twin-shaft design maintains fluidity even in highly viscous mixtures, delivering superior performance in heavy-duty applications such as precast, block, and dam concrete. All models are equipped with modern safety and maintenance features, including an automatic lubrication system, maintenance covers with safety sensors, and a hydraulic discharge cover. Twin-Shaft Concrete Mixer Technical Specifications MODEL NO: CTS-1 Loading Volume: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox Blsdpfoxpi Utex Adrsi Main Body Wear Plates: 15 mm Ni Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-2 Loading Capacity: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-3 Loading Volume: 4,500 liters Fresh Concrete Volume: 3,750 liters Compacted Concrete Volume: 3,000 liters Engine Power: 2 x 55 kW Side Body Wear Plates: 20 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-4 Loading Volume: 6,000 liters Fresh Concrete Volume: 5,000 liters Compacted Concrete Volume: 4,000 liters Engine Power: 2 x 75 kW Side Body Wear Plates: 25 mm Ni-Hard Main Body Wear Plates: 25 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-5 Loading Volume: 7,500 liters Fresh Concrete Volume: 6,250 liters Compacted Concrete Volume: 5,000 liters Engine Power: 2 x 90 kW Side Body Wear Plates: 25 mm Ni Hard Main Body Wear Plates: 30 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Bodpfx Adjyx Dw Doroli Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Infeed mechanization TWIN double-frame sawmill edger Blade diameter: 120 mm Bljdjyxywtjpfx Adrsi

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ Bsdpsxya Hzefx Adroli 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S Bjdpoywr Tdofx Adrjli

Condition: used, Platform trailer, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No: 31361-1 = Year of manufacture 03/2015 Chassis No: 31361-2 = Year of manufacture 03/2015 Payload: 20000 kg Unladen weight: approx. 3760 kg Bedpfxsiiumro Adreli Permissible total weight: 23760 kg Platform height: 850 mm Platform length: 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width: 2500 mm Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Swiveling drawbar, drawbar can be bolted on at the front or rear - Drawbar with towing eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beams, height 280 mm, width 95 mm - Very stable steel floor made of 10 mm corrugated sheet - Tarpaulin superstructure with steel base frame, can be loaded from the side, max. transport height 2300 mm under the tarpaulin Length for transport: 610 cm (with folded-up drawbar) Width for transport: 250 cm Height for transport: 330 cm (with tarpaulin superstructure) Weight per trailer: approx. 3760 kg Good condition 2 units available Price quoted per trailer

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame A video of this mixer is available below. Bljdpfx Adoykn Tlorei

Condition: excellent (used), functionality: fully functional, Risco RS 750 Twin-Shaft Paddle Mixer with Mast Lifter Bledeyt Sahopfx Adrji Manufacturer: Risco S.p.A. Model: RS 750 Power supply: 400 V, 3 phase, 50 Hz Power: 7.8 kW Capacity: 750 l Weight: 1010 kg Dimensions: 2760 × 1170 × 1720 mm Loading system: Integrated Nieros mast lifter The Risco RS 750 twin-shaft paddle mixer is a robust and reliable machine designed for industrial food production. It features two counter-rotating shafts with paddles, ensuring intensive yet gentle and even mixing of various masses—meat, vegetable, cheese, or confectionery. Thanks to its large 750-liter capacity, it is perfectly suited for medium and large processing plants. The unit is integrated with a professional Nieros (Heinrich Niederberger KG) mast lifter, enabling automatic loading of raw materials directly from standard 200-liter meat trolleys.

Condition: excellent (used), Risco mixer 450 litre. With forward and reserve and front end discharge. Brand new electrical panel. Bodpeumcadofx Adreli

Condition: good (used), Year of construction: 2007, functionality: fully functional, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, OPERATIONAL, WITH DOUBLE Y-AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, power: 18 kW, ASA 6, 4500 RPM - Sub-spindle bar capacity: 51mm, power: 11 kW, ASA 5, 5000 RPM - Live tool power: 7 kW with 40 Nm torque on both turrets (65mm throat, SUPERMILL) - Y-axis on both turrets (Y-stroke upper +50/-50 mm; Y-stroke lower +20/-50 mm) - Part catcher type G - Distance between spindle noses: 870 mm - Maximum turning diameter: 225 mm - Rapid traverse Z: 36 m/min, rapid traverse X: 18 m/min - Enlarged 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, double stage, 3-12 bar with filters - Coolant wash over spindles - Air blow and coolant wash through sub-spindle - Auto shut-off - 3-color stack light - NT Nurse axes load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Set of toolholders and collet holders as follows: Supplied with the machine: 4 external toolholders 4 dual opposed toolholders 6 boring bar holders Bjdpfx Aeyrb Tnsdrsli 1 H32 cutoff blade holder 4 radial live toolholders (brand HEIMATEC) 4 axial live toolholders 1 Bellegrandi collet holder type MSCNT70-A6” for BA and BD series, size 70 (complete with mounting sleeves, main spindle side) 1 Bellegrandi collet holder type MSCTNR70-A5” for BA series, size 70 (complete with spring ejector, sub-spindle side) Complete Hand Jaw set for the part unloader

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Bljdpfom Rhfdox Adrsi

Condition: used, machine/vehicle number: 18025, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bjdpfxjh Axp Es Adrjli Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 6235, Twin-headed Stapler for Booklets - Pads Nagel MultinakSerial-No. 6235-1 Online-Video-Inspection by Skype-Video Blodpfx Ajh Axxxjdroi We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19171, Twin-headed Stapler Nagel Mulinak Sitcher Online-Video-Inspection by Skype-Video Blsdpfx Ash Axykedrsi We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, Online-Video-Inspection by Skype-Video Bsdpfeh Ax H Rex Adrjli We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test