Used Twin Saw for sale (9,624)

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Lsdpfx Aev Nhg Soffshr Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor Lhjdpfxoxb Edzo Affer - Technical documentation

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 300 mm, travel distance Z-axis: 740 mm, spindle speed (max.): 5,000 rpm, total height: 3,900 mm, overall weight: 14,000 kg, product length (max.): 3,100 mm, number of axes: 2, This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine. • Machine base: MINERALIT • Max workpiece diameter: 140 mm • Max workpiece length: 630 mm • Max workpiece weight: 20 kg • Number of turrets: 2 • Tool stations per turret: 11 • Tool shank diameter: 40 mm Lhsdpfx Afox Imr Asfsr • Rapid traverse (X/Z): 30 m/min / 40 m/min • Feed force (X/Z): 9.4 kN / 10 kN • Ball screw diameters (X/Z): 32 mm / 40 mm • Spindle nose: DIN 55026-A6 • Front bearing diameter: 110 mm • Drive (100% duty): 29 kW / 200 Nm / 1400 rpm (speed at nominal power) • Loading time: 4–5 s • Chip-to-chip: 6–7 s Additional equipment • Integrated EMAG pick-up system (automation)

Condition: good (used), Code: 0271 Brand: STROMAB Model: TR 600 MATRIX 2 PLUS - CE Standard Automatic cut-off saw with electronic pusher MATRIX 2 PLUS ( mm 8000) for the production of pallets, packaging, door and window frames, furniture and garden furniture, carpentry and various - CE Standard Technical data: Blade diameter mm 600 Motor Hp 12,5 Blade speed min 3000 Working table height mm 850 Hydraulic blade unit drive Blade lifting speed regulator Cutting area protection cover Bimanual hand guard control Cutting capacity Width 610 mm - Height 30 mm Width 580 mm - Height 60 mm Width 530 mm - Height 100 mm Width 490 mm - Height 120 mm Width 450 mm - Height 140 mm Width 380 mm - Height 160 mm Outfeed flat table Suction ports n° 3 diameter mm 100 Numerically controlled pusher MATRIX 2 PLUS Technical data: Maximum working length mm 8000 Feeding system featuring precision rack and brushless motor Lhodpjx Ikvlefx Affjr Positioning reading on magnetic stripe Positioning precision +/-0,4 mm Pneumatic rising of the pusher with workpiece measurement sensor Main system: Cutting cycle (pattern) editing by keypad, by remote PC via serial port (RS232) or by Ethernet Working software: A) N° 99 programmable cutting cycles with 15 sizes (lines) per cycle - Example of cutting cycle: Board length, trim cut , 1 size (line).....15° size B) N° 1 cutting cycle with 100 programmable sizes to be cutted in sequence Exit surface 4000 x 600 mm Compressed air 7 bar Overall dimensions of assembled machine: mm 13000 x 2000 x 1600 h Overall dimensions for transport : Machine mm 1200 x 1700 x 1600 h - Matrix pusher mm 8800 x 1500 x 1500 h Weight kg 1600

Condition: good (used), Underfloor pull circular saw, crosscut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit can be swiveled 45°, on a mobile base frame -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 260 mm, (max. Ø 300 mm) -Max. Cutting height 75 mm (max. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Dimensions 930/855/H1420 mm Ledjpyk Niepfx Affshr -Weight: 182 kg

Condition: excellent (used), functionality: fully functional, Casolin SC-OO Circular Saw Cutting width on the right: 1060mm Scoring unit Maximum cutting height: 100mm with 350mm blade Lhodpfox Ihq Tex Affor Manual angle adjustment of the saw blade up to 45° Manual raising and lowering of the saw blade Variable blade speeds by belt: 3200-4500-6000 rpm Main motor power: 4kW Scoring unit motor: 0.75kW

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm Lhedownr Ehjpfx Affjr

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: Lhodpfx Ajxb Edujffsr - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 561, cutting length (max.): 3,100 mm, cutting height (max.): 95 mm, cutting width (max.): 3,100 mm, feed rate X-axis: 100 m/min, saw drive: 11 W, warranty duration: 12 months, Equipment: scorer, HOLZ-HER Pressure Beam Saw Tectra 6120 power, year of manufacture 2025, delivery ex works - 1 angular air-cushion table 1800 x 600 mm with 1800 mm stop rail - 2 air-cushion support tables 1800 x 600 mm - 3 feed rollers at the front - 3 double-finger floating workpiece clamps - 4 floating workpiece clamps - Sliding door on the left - Automatic cut length limitation - Pro-Lock quick-change clamping system - Optibase Plus optimization software for office use - Uninterruptible Power Supply (UPS) - Automatic central lubrication - Label printer and software - Hand-held remote control unit - Width stop positioning speed 25 m/min, return speed 100 m/min - Saw carriage feed speed 0–100 m/min, return speed 130 m/min - Scoring motor 2.2 kW Lhjdpfx Afsx Nqrvofor - Maximum saw blade projection: 95 mm - Motorized groove height adjustment 0–30 mm - Delivery time: immediately available

Condition: good (used), Code: 0181 Brand: HARWI - NEDERLAND Model: 130 - CE Standard Circular saw with tilting blade for cutting solid wood, panels and various materials - CE Standard Technical data: Sturdy structure Tilting blade 0-45° Lodpfjw Du E Asx Affehr Max cutting height 110 mm Cutting height at 45° 90 mm Blade diameter mm 400n F30 Cutting width mm 680 Motor power Kw 5,5 Upper protective cover New Vidia blade included Suction port diameter mm 120 Overall dimensions mm 1300 x 1350 x 1350 h Weight kg 320

Condition: used, functionality: fully functional, cutting length (max.): 1,400 mm, cutting height (max.): 150 mm, saw blade diameter: 450 mm, overall weight: 1,100 kg, power: 5.5 kW (7.48 HP), ALTENDORF F45 Panel Saw Type F-45 TKR Scoring unit Lhjdpjx Nql Aefx Affjr Sliding table length: 1400 mm Cutting width right: 1050 mm Saw motor: 5.5 kW Scorer motor: 0.75 kW Max. saw blade diameter: 450 mm Cutting height: 150 mm Table extension and table widening Saw blade height and angle (0-45°) adjustable via hand crank Angle display Saw blade speed display Mitre fence Extraction ports: 80 + 120 mm Weight approx. 1100 kg

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Lhsdpfx Afsx Ifk Dsfjr Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, Ledpfx Aeu R Sy Nsffshr rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: excellent (used), functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 500 mm Lhjdpfx Afox Ifimefor Electronic tilting of the heads Internal/external tilting from 22°30′ to 135° Feeler probe Chip conveyor belt

Condition: used, Year of construction: 2000, 1 unit Bandsaw EUMACOP ER500 mobile, as per images and inspection Ljdex Ifdqspfx Affohr Colour: grey Year of manufacture: 2000 Condition: used Payment method: Advance payment by bank transfer Storage location: Joinery/Hall 2 Shipping: Self-collection only – shipping is not offered for this item!

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Lhjdpfx Asw Dfnheffer Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality Lhodpfx Ajwnrf Uoffer - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: good (used), Code: 0215 Brand: STROMAB Model: PS 45/F - CE Standard Manual pendulum saw for cutting wooden boards, packaging, wooden fixtures, carpentry, sawmills, and various - CE Standard Technical data: Blade diameter mm 450 F30 Motor Hp 5,5 Motor speed rpm 2800 Cross-cut capacity mm 510 Lhodpfexivzaox Affer Depth of cut mm 130 Manual feed Inlet roller table Outlet roller table Extractor hood diameter mm 150 Overall dimensions mm 3800 x 1500 x 1850 h Weight kg 290

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment Ljdpfxeu R S Dhj Affehr ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Lhjdpsu R Sypsfx Affer Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control Lodpfxjvtrkis Affehr - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Lhodpfewyap Ejx Affsr Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Lhodew Nv I Ujpfx Affsr Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Lsdpew Nx A Isfx Affshr Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine - Lhsdpfx Aju R S Dbeffsr