Used Turret Punch for sale (3,126)

Year of construction: 2013, condition: used, including 1 punching die / 2:1 round hole Machine cycle speed: 60 strokes per minute Operating modes: Punching die only: for standard jobs (regular paper) Punching die with separating device: for difficult jobs (with cardboard) Production speed: Depends on the size and condition of the paper to be punched, but is lower than the maximum cycle speed. Tool change mode: Manual mode with a duration of approx. 45 seconds Format change mode: Cedpoy Inzrofx Akcerb Manual mode with a duration of less than 1 minute Maximum punching thickness: 0.7 mm (equivalent to approximately 7 sheets of 80 gsm). Maximum diameter of punched holes: 8 mm Paper weight: from 80 to 250 gsm Minimum sheet size: 138 x 138 mm Maximum sheet size: 330 x 300 mm Connection rating: 220 – 240 V, 50/60 Hz Technical specifications according to manufacturer's information (without guarantee)

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Crjdoy Inwyopfx Akceb

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Crjdpfsy Nnakjx Akcsb

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Csdoyyvgtspfx Akcsrb

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Codpfxsyyppbo Akcsrb

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 Credpfsy H Hc Eex Akcjb MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 54,221 h, machine/vehicle number: A0150A0211, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Rexroth, controller model: IndraMotion MTX, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: TruFlow 2700, laser hours: 11,836 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,370 mm, type of cooling: water, compressed air connection: 8 bar, overall weight: 24,000 kg, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, foot remote control, quick-change device, safety light barrier, We are offering this ready-to-use Trumpf TruMatic 7000 K02 1300 laser punching machine, year of manufacture 2012. Operating hours: 54,221 h Laser hours: 39,018 h Crsdpoy Nbrgsfx Akceb Laser on: 11,836 h Punching force: 220 kN Laser power: 2,700 W Travel range - X: 2,500 mm Travel range - Y: 1,250 mm Cutting capacity (mild steel): 8 mm Cutting capacity (stainless steel): 8 mm Cutting capacity (aluminum): 6 mm Machine weight approx. 24,500 kg Dimensions: 8,000 x 6,750 x 2,330 mm Standard equipment: - Brush tables - Linear tool magazine and clamps - 21 tool stations, 4 clamps - Foot switch for closing clamps - Flap for punched parts 500 x 500 mm incl. sensor - Fast flap for laser parts 500 x 500 mm incl. sensor - Scrap container - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejector cylinder for laser parts - Liftable laser cutting support - Slag cone detection TRUMPF laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device with bus connection - ControlLine Punch head: - Electro-hydraulic punch head - Hydraulic single tool holder with 360° rotation - Programmable stripper with adjustable pressure - Tool length compensation - Punch spray lubrication - Punch slug extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control based on Rexroth IndraMotion MTX - 15" TFT color display - Remote service via internet - Auto shut-off Data transmission: - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam light barriers - Hydraulic quick shut-off - Uplift detection - Calculation of fill level height in punching console Programming: - Advanced workshop programming Additional features: - Active die - MultiTool function - MultiBend function - MultiShear function - Thread forming function - Marking function - Deburring and roller technology function - Die spray lubrication - Additional cylinder - Toolmaster with 70 tool positions - Conveyor belt for punch scrap incl. waste container - Vibration-damped installation If you have any questions or require further information, please feel free to send us a message or call us. The seller is not liable for typographical or data transmission errors. The machine’s visual condition, technical status, and wear are in accordance with its age; used machines are sold without any warranty.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left Crjdpfx Aksy I N Rheceb y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Codexxb Rropfx Akcorb Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1981, Bridgeport BR2J2 Turret Milling Machine Digital Readout Spindle Taper R8 Table Size 1065 x 230mm Table Travel: X - 765mm Y - 305mm Knee Travel: Z - 405mm Quill Travel Z - 127mm Coolant 415V Electrics Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79044 Crsdpfeyary Iox Akcob Machine Serial Number: 362070681W Cost: £4,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Crjdpfxjx Af I Aj Akceb Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Crodpfx Akoyzfn Aoceb Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Machine in good working condition, 3-jaw chuck, including tool holders. Clamping plate 800 mm Cedpfoy Hq Npox Akcerb Max. working diameter mm 1100 Max. working height mm 795 Max. working weight kg 4000 Z axe mm 750 Spindle revolutions 500 rpm Machine dimensions mm 5630 x 4265 x 4530 Machine weight kg 13500

Year of construction: 2000, condition: good (used), Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Crsdpji Eld Ujfx Akcsb Machine weight approx. 11000 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Crodpfxoyrcyce Akcsb Sheet thickness for stainless steel: 4-6 mm Accessories: - Tool change cassettes - Table with ball rollers - Operating hours: 97,000

Condition: excellent (used), Year of construction: 2012, operating hours: 15,700 h, functionality: fully functional, punching force: 16 t, total height: 2,155 mm, total width: 4,130 mm, total length: 5,840 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 1,250 mm, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 150 kg, overall weight: 8,000 kg, space requirement width: 4,130 mm, space requirement length: 5,840 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, Equipment: safety light barrier, For sale: 1x TruPunch 1000 Compact Edition (1250 mm x 1250 mm) - Only 15,700 operating hours! - Brush table - Year of manufacture: 2012 - 10 tool stations, 2 clamps - Control system based on Bosch CML45 with 15" TFT color display - Dual-beam light barriers The machine was purchased directly from Trumpf in 2015. It was originally a 2012 demonstration machine, previously used in Trumpf’s training workshop (very low hours there). Subsequently, it was operated in our facility in single-shift production for manufacturing welding equipment enclosures, which accounts for the low total of only 15,700 operating hours. It has been used exclusively for light sheet metal, primarily mild steel sheets of 1.25 mm and 2.0 mm thickness, and occasionally 3 mm. No heavier materials processed. No known defects; the machine is still in use and will be available from May 2026. Reason for sale: discontinuation of production. The “Compact Edition” of the TP1000 is optimized for part sizes up to 1250x1250 mm. Larger formats are possible using the “repositioning” function, which requires additional tables. The standout advantage of the “Compact” design is its minimal footprint of just 4.13 x 5.84 m. The machine is equipped with almost every available option: - MultiShear function - Thread forming function - Marking/Fast Beading function - Deburring and rolling technology Crodpfx Akoy Iv I Tjcsb - Part chute sensor Asking price for the machine: €42,000 plus VAT. Excludes accessories, price ex-works, loading and transport at buyer’s cost. Machine available from May 2026. Optional programming and accessories: - Fully configured workstation (PC) with installed software. Only needs to be connected to the network and is immediately ready for use (saves significant time & money). “TruTops Punch” accessible via network - 10 RTC cassettes - 2 MultiTools with 5 tools each (ideal for this machine!) - Various tools (including 2 x louver tools, round, rectangular, and slitting tools) - Tool adjustment aid Asking price for accessories: €3,000 plus VAT.

Condition: used, Model: WMW NILES DKZ4000 Vertical Turret Lathe (VTL) Faceplate Diameter: 3,500 mm Max. Turning Diameter: 4,000 mm Max. Turning Height: 2,000 mm Cedpfx Akey Ivwbocorb Side Head Vertical Travel: 1,700 mm Side Head Horizontal Travel: 1,000 mm Origin: Germany (WMW NILES)

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE Csdpfx Aowirkgjkcorb several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Cedpfxjvfxwtj Akcorb Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Credpfx Aovfx Ulekcjb Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Year of construction: 2002, The equipment described is a register punch manufactured by Bacher. This specific model is known as the ZollRegister punch Control 2000 Zoll and was produced in the year 2002. The machine has a size of 1400 mm. It is currently in stock and located in Germany. The register punch is reported to be in good condition, suggesting that it has been well-maintained and is ready for use. Format: 1400 mm Credpjwzxzpefx Akcob Equipment: Register punch Good condition

Condition: used, Year of construction: 1973, The Heidelberg OHT, manufactured by Heidelberg in 1973, is a robust machine designed for printing and die-cutting operations. With a format of A4, it is currently in storage in Germany. Identified by the machine number T 184634 H, this press has a punching force of 40 tons and can handle a minimum format of 40 x 70 mm. It operates at a speed ranging from a minimum of 2,200 revolutions per minute to a maximum of 5,500 revolutions per hour. The machine includes a skeleton chase of 260 x 350 mm and a standard chase of 260 x 340 mm, with a maximum format of 260 x 380 mm. It comes complete with accessories and a closing frame, and features a letterpress platen and a die-cutting platen. The delivery condition is FCA. Format: A4 Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Equipment: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Complete with tools and accessories include frame Cedpfx Asvfxu Eokcerb Standard chase: 260 x 340mm Machines No T 184634 H

Condition: good (used), Year of construction: 1983, Faceplate diameter: 1250 mm Max. turning diameter: 1400 mm Max. turning height: 1180 mm Max. ram stroke, vertical: 750 mm Table load capacity: 5,000 kg Faceplate speed range: 4 - 210 rpm Vertical slide swivel adjustment: 45° Feed range: 0.044-8 mm/rev Cjdpfx Akjy Ex Epecsrb Rapid traverse: 2 m/min Machine dimensions (L x W x H): approx. 2715 x 2665 x 3950 mm Total weight: approx. 16,500 kg Accessories / Special features: • 2-axis digital display, make ACU-Rite • Faceplate Ø 1250 mm with 4 jaw chucks • 5-position turret head Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 292500 € 30 to 3000x1500 mm 3000 mm 1500 mm 70 m/Min 60 m/Min 120 m/Min 40 mm 1200 1/Min 325 1/Min 2800 1/Min 6 mm 3 mm 3 mm 1.5 mm 28 0,1 mm 0,05 mm 22 U/Min 150 U/Min Crsdpfx Ajynna Hskcjb 200 kg 940 mm 6 bar 88.9 mm 15 kW 180 l 6650 mm 7650 mm 6300 mm 8300 mm 2310 mm 18250 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station Index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules PRICE FCA TÜRKIYE

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 249800 € 30 to 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler Codpjynnayofx Akcsrb USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye