Used Triple for sale (1,068)

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Iodpfx Aszpwg Roh Estl Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm² Itodjw E I Itjpfx Ah Esl

Condition: good (used), Year of construction: 2007, operating hours: 4,800 h, KOMATSU FG40T-7, triple mast, 4500 mm lift height, side shift, LPG, 4800 hours, 2007. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-Nuland. Itjdpoz Da Ttefx Ah Eel Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2022, condition: used, functionality: fully functional, Selling a liquid chromatograph, SCIEX Triple Quad 6500+ with Shimadzu LC-40Dx3. Itsdpfxsyw Nf De Ah Ejl Complete, well-maintained set; the instrument has not been fully utilized. Can be inspected in the laboratory. You are welcome to visit. Dismantling and transport are the responsibility of the buyer.

Condition: good (used), Year of construction: 2007, operating hours: 18,100 h, load capacity: 3,000 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, Linde H30D triple 480 Freelift / Sideshift / Fork adjuster, 2007, VW Diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 Isdszf Hv Hopfx Ah Estl 5391 LR Nuland

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min Ijdpfx Aszkf I Esh Eotl · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Condition: good (used), Year of construction: 2003, operating hours: 15,630 h, Linde H45D-04/600 triplo595 / side shift / fork adjuster / 2003 / 15,630 hours DIESEL A video can be sent via WhatsApp. Itedpfx Ahjzyauxj Eol We have a continuous supply; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2010, operating hours: 12,850 h, Linde H30D-01 triplo530 / side shift / 4th function / 2010 / 12,900 hours / DIESEL A video can be sent via WhatsApp. Itsdszzzn Aepfx Ah Eel We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1992, operating hours: 14,148 h, Linde H16T Triplo 470 Freelift / 3rd function on the mast / VW 1992 / 14,050 hours, LPG powered. Dutch registration. A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for an inspection and/or test drive. Please call beforehand as we are not always on site. Itsdpfx Ahszxq Slj Eol Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1989, operating hours: 3,536 h, load capacity: 2,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, empty load weight: 3,500 kg, mileage: 3,536 km, Obtained through trade-in. Electric three-wheel forklift. Make: Hyster. Itjdpfxjz Dg Ece Ah Ejl Year of manufacture: 1989. Capacity: 2,000 kg. Lifting height: xxx. Mast height (extended): 2,200 mm. Hours on the meter: 3,536. Freelift. Battery: 2022. With charger. Watch the video on YouTube.

Condition: good (used), Year of construction: 2019, operating hours: 8,850 h, Jungheinrich TFG430 500DZ triplo500, with free lift / side shift / fork adjuster / 2019 / 8850 hours / LPG. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Itsdozzcvuepfx Ah Eel Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance; we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2006, operating hours: 12,260 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H30D-01 Triplo 465 Freelift / Sideshift / 4th Function, VW Diesel, 2006 A video can be sent via WhatsApp. Isdpfxszqmxxe Ah Eetl We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), functionality: fully functional, machine/vehicle number: HHIHHH02HB0000320, Year of construction: 2011, operating hours: 9,791 h, load capacity: 1,190 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, fork carriage width: 1,800 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), overall weight: 3,156 kg, Equipment: CE marking, UVV, fork extension, full service history, hydraulic fork positioner, lighting, pallet forks, retractable fork, sideshift, Hyundai 18L-7 forklift – 1.8 tons – Triplex mast – TDL hydraulic fork spreader Ijdpszz Iu Nofx Ah Estl Due to the renewal of our equipment fleet, we are offering for sale our Hyundai 18L-7 forklift. This machine belongs directly to our company and has been used in our workshop, with regular maintenance. FEATURES: • Year: 2011 • Hours: 9,791 h • Lifting capacity: 1,190 kg • Triplex mast • Lifting height: 4,700 mm • Forklift weight: 3,156 kg • Forks: 1,200 mm • Solid cushion tires • Side shift • TDL hydraulic fork spreader • Fork extensions included • Front and rear lights • Turn signals • Rotating beacon • Windshield wipers MAINTENANCE AND DOCUMENTATION: • Forklift in very good working condition • Regular maintenance • Spark plugs replaced in November 2025 • Maintenance log available • Certificate of conformity provided The forklift is currently in our workshop and can be viewed and tested in operation by appointment. Additional photos and videos are available upon request. Delivery can be arranged depending on the destination. Price: €9,250 (excluding VAT) VAT is recoverable.

Condition: good (used), Year of construction: 2011, operating hours: 8,239 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,700 kg, mileage: 8,239 km, TRIPLEX forklift, brand STILL Year of manufacture: 2011 Capacity: 3,000 kg Lifting height: 5,390 mm Equipped with a FREELIFT Equipped with a SIDESHIFT and FORK SPREADER Mast height: 2,500 mm Isdpjzaaw Ijfx Ah Estl 8,239 hours on the meter Battery replaced in 2021, equipped with an external charger and automatic filling system Video to follow.

Condition: good (used), Year of construction: 2013, operating hours: 17,150 h, Linde H30D-02 Triplo 480 Freelift / Sideshift / 4th Fork Spreader, VW Diesel, 2013, 17,150 hours, DIESEL. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Itsdpfx Ahozxq Srs Ejl

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Itedpfx Aheq Nfuze Ejl 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), Year of construction: 2014, operating hours: 12,300 h, Still RX70-40 Triplo 400 Freelift / Sideshift / Fork Adjuster Container Truck Deutz Diesel 2014 Iedpezypunsfx Ah Eetl A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2011, operating hours: 9,026 h, Still RX70-35 Triplo 500 Freelift / Sideshift / 4th function / Diesel 2011 / 9030 hours A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance; we are not always on site. Itjdozypuhepfx Ah Eol Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Itsdpjx Ndu Djfx Ah Ejl Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 7,409 h, load capacity: 1,500 kg, lifting height: 5,430 mm, fuel type: electric, mast type: triplex, Equipment: UVV, Reliable STILL R50-15 three-wheel electric forklift with a triplex mast, free lift, and a lifting height of 5.43 m. Suitable for warehouses, logistics, production, and confined working areas. Technical data: Manufacturer: STILL Model: R50-15 Year of manufacture: 1995 Load capacity: 1,500 kg Drive: Electric Itjdozd U Emjpfx Ah Eol Mast: Triplex mast with free lift Lifting height: 5,430 mm Operating hours: 7,409 h Battery: in good condition Charger: included Safety inspection: SP valid until 2025 Condition: Used, technically functional, regularly maintained. Shows signs of wear and tear due to age and use. Type plate partially damaged, load chart available. Location: 65618 Selters. Collection or transport from the location is possible.

Condition: good (used), Year of construction: 2016, operating hours: 12,485 h, load capacity: 1,400 kg, lifting height: 4,716 mm, mast type: triplex, construction height: 2,065 mm, empty load weight: 1,600 kg, mileage: 12,485 km, Electric three-way reach truck Brand: Still Year of manufacture: 2016 Capacity: 1,400 kg Lifting height: 4,716 mm Mast height (lowered): 2,065 mm Hours: 12,485 hours Itodpfsz Ailfox Ah Eol Free lift Battery with charger Automatic filling system Video to follow

Condition: good (used), Year of construction: 2007, operating hours: 3,638 h, load capacity: 1,400 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, construction height: 1,900 mm, empty load weight: 1,400 kg, mileage: 3,638 km, Obtained through trade-in Triple-mast electric stacker, brand Jungheinrich (Germany), year of manufacture 2007, 3,638 hours on the meter. Capacity 1,400 kg, with free lift and initial lift, ideal for uneven floors. Lifting height 4,300 mm, mast height 1,900 mm. Itedpfxez Dgwro Ah Eel Battery from 2013, includes charger. Watch the video on YouTube.

Condition: good (used), Year of construction: 2004, operating hours: 16,185 h, lifting height: 6,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, Toyota 62-7FDF25 Triplo 600 Freelift/Sideshift Diesel 2004 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. Itedpfxszqcuvj Ah Esl All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can schedule a non-binding appointment for an inspection and/or test drive. Please call in advance; we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), mileage: 268,805 km, power: 331 kW (450.03 HP), first registration: 09/2017, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 7,750 mm, fuel: diesel, brakes: retarder, color: silver, driver cabin: other, emission class: euro6, number of seats: 2, total length: 10,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electric window regulation, retarder, traction control, = Additional options and accessories = - Additional steering axle - Air conditioning (automatic) - Power take-off (PTO) - Sun visor = Remarks = Crane Hours: 5860 uur Ijdpfxjzucwlo Ah Estl Number of hydraulic extensions: 8+6 Number of manual extensions: 1 Number of support legs: 4 Number of extra functions: 2 Remote control: ✓ Load Hook: ✓ Rotator: × Very nice Scania G450 equipped with a Palfinger 92tm crane! In addition to the options already mentioned, it has: -Retarder -Automatic -Air conditioning -8x4 triple -Palfinger PK92002-SH-G -8x hydraulically extendable -PJ125 E Flyjib -6x Hydraulically extendable -1x Hand part etc etc This truck is ready for its next job! = More information = General information Cab: half sleeper Registration number: BD-462-F Technical information Number of cylinders: 6 Engine capacity: 12.742 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Rear axle 3: Lift axle; Max. axle load: 8000 kg Weights Empty weight: 26.840 kg Carrying capacity: 9.260 kg GVW: 36.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger PK92002-SH-G Plus Jib 125e, year of manufacture 2016 Maintenance APK (MOT): tested until 03/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: good (used), Year of construction: 2007, operating hours: 18,635 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, Linde H25T Triplo 550 Freelift / Sideshift / Fork Adjuster LPG 2007 Iodpszr Eirefx Ah Eetl A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland