Used Tray Erecting Machine for sale (69,284)

Condition: new, pressure 20 t Bedpfx Aleymf Ilobewn stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1580 mm Thickness 94 mm - solid steel plate - milled surface - 4 bolted lifting lugs Bjdpfehwn Tuox Albewn - plate with several symmetrical holes Net weight 3400 kg

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs Bodpfx Ajhwn Tiolbswn - plate equipped with some symmetrical holes Net weight approx. 2380 kg

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Bwsdpfx Aodzp U Aslbon Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm Bwedpfx Asin Rn Ajlbjn -Weight: 2080 kg

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg coil internal dia. 420 - 520 mm Bsdjymp Rdepfx Albown coil external diameter 1600 mm total power requirement 2,2 kW weight of the machine ca. 2 t

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bodpfogqfmnox Albown Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Bwsdsgqflqjpfx Albon Demonstration machine year 2022 incl. hand and foot pedal Horizontalbendingmachine as good as new Please contact us for more information for this horizontal bender.

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Bedpfx Alexfb Ikebswn Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Bodpotgvgpsfx Albewn Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Bjdpfjxzikfex Albswn

Condition: excellent (used), Year of construction: 1985, wire diameter range: 1,5 - 7,0 mm Bwsdpfx Aemt A Svolben cutting length: up to 8.000 mm wire feeding speed: 29 - 90 mtr./min

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. complete with ciller and Bodpfx As Syv Tolbjwn motorized decoiler

Condition: good (used), Manufacturer: unknown Bedpfoygv H Ejx Albjwn Year of manufacture: Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Dimensions: 7,500 x 1,000 x 1,200 mm Weight: approx. 0.5 t

Condition: new, The 15 kW motor ensures efficient straightening and cutting, enhancing production performance. The ability to work with bars of various diameters and lengths makes the machine highly versatile. A powerful straightening unit adapts to different wire thicknesses, always ensuring high processing quality. Bedoyappgjpfx Albjwn It handles bars of different diameters, making it the ideal tool for various industries. Manufactured from high-quality materials, guaranteeing longevity and reliability. Fully operational and ready for immediate use upon delivery.

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: ST-32-004, year of last overhaul: 2025, Viper TL, an advanced automatic packaging system designed to streamline product sorting and loading into Tray & Lid and Wraparound boxes. It is especially suitable for cans, pouches and sliced meat or cheese. Bwsdjx Ttywepfx Albsn This exact VIPER TL is AS NEW, only exhibited few times on international trade shows as DEMO machine. Details about the machine: VIPER TL, capacity 6–10 boxes per minute The types of boxes it can produce: Large tray & lid: LWH 398×354×178 or 143 mm Small tray & lid: LWH 398×266×178 or 143 mm Lidl wraparound box: LWH 398×354×143 mm The first two are tray & lid (separate box and lid on the outside), and the third is a classic wraparound box that can have perforation for display purposes.

Condition: good (used), Pre-stroke: ALBA Bsdjlz I Hbspfx Albjwn Type Mvhy 50 sheet metal straightening: Georg SKB With complete documentation!

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Bedpfxjlz I R Ro Albswn Belt straightening: Manufacturer. George Type: SBK 2 Double straightening and feed line!!! With complete documentation!!

Condition: good (used), Number of straightening rolls 5 sheet width 430 mm Sheet thickness 1 mm Bwodpjgvl U Refx Albjn Top roll diameter 2 Top rolls - Ø 60 mm Bottom rolls diameter 3 Bottom rolls - Ø 60 mm

Condition: good (used), All information without guarantee. A demonstration is at any time possible in our showroom. Bwodpfxsfd R Ahs Alben

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Bedpfx Aljwm Elfobown Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider Bwodpfx Ajwyaywjlbsn ● svi ležajevi u mašini su FAG ili SKF

Condition: used, functionality: fully functional, Durmazlar HAP 3080 Plate Bending Machine. Strength: 80 T Folding length: 3000 mm Distance between uprights: 2520 mm CNC: Durma Bedpfsv R Ikysx Albown Throat: 350 mm Vertical stroke: 135 mm Working speed: 8 mm/s Axis number: 3 Good working condition. Please check out our other listings as well.

Condition: used, sheet width 300 mm coil weight 400 kg coil internal dia. 240 - 640 mm coil outside dia. 1000 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Double decoiler, type MSD 18 (machine no. 18791): Bsdpfopflptex Albown Bandwidth: 300 m Spool weight: 400kg Coil outer diameter: 1000 mm Coil inner diameter: 240 - 680 mm Straightening machine, type MR17S60M (machine no. 18591): Bandwidth: 100mm Band thickness: 0.2 - 1 mm

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable. Bwodpoh Ra Spofx Albon