Straightening machine, strip straightening device with gear motor, straightening apparatus for cardb

LENZE

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustment gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Motor: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 3x geared motors available -Price: per piece -Dimensions: 410/280/H200 mm Hnedpfx Aisttimbo Nek -Weight: 16.7 kg/pc.

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Hnjdpfxsd R Er Do Ai Njk Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), hydrodynamic fluid coupling, centrifugal coupling, rubber disc coupling, claw coupling, connecting coupling -Manufacturer: Lenze -Type: KD 3922656 Size S 08 -Outer diameter: 470 mm -Shaft mount: Ø 65 mm -V-belt pulley: 7-groove SPB 230-7 (17 mm) -Dimensions: Ø 470 x 350 mm -Weight: 76 kg Hodpfx Aijyzfucj Nsnk

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm Hnedpfx Aijxt Dnio Nok -Protection rating: IP55 -Number: 4x geared motors available -Price: per piece -Dimensions: 490/160/H230 mm -Weight: 20.5 kg/pc.

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm Hnjdpfofn Aqmex Ai Njk The system was dismantled, checked and repainted.

Condition: good (used), Variator pulley, variable speed pulley, variable belt pulley, PIV transmission, variable speed transmission, variable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley -Manufacturer: Lenze, Vario belt pulley with compression spring -Outer diameter of pulley: 130 mm -Inner diameter of the opening: 18 mm -Quantity: 1x pulley available -Price: per piece -Dimensions: Ø130 x 95 mm Hodswz U U Eopfx Ai Nsnk -Weight: 1.2 kg/pc.

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm Hodpfx Aieqv I S Se Njnk External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Dalex Works Pms 10-2 380V Hodpfx Aisg Rcpxj Nenk 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: good (used), Input: 3 / PEAC 400/480V 12.0A, 10.0kVA, 50/60Hz Output: 3 / PEAC 0-480V 13.0A, 10.8kVA, 0-480Hz ID no.: 13180666 Serial no.: 000010 Hjdpfx Aioyrq Ibo Nonk Width: 135 mm Height: 350 mm Depth: 250 mm Weight: 6600 g Condition: Good, second-hand

Condition: good (used), 3 kW 1.500 UpM Hnjdsylcn Tjpfx Ai Nok 8,7 - 52 UpM 444-800 Nm

Condition: excellent (used), Year of construction: 2009, Mobile coil trolley FORSTNER AG 5000 b2mf 1500 Maximum roll width 1500 mm Load capacity 5000 kg Inner diameter 360 - 630 mm Outer diameter 1100 mm Hodpfx Asmv Hv Aoi Nsnk With 4-arm spindle Double bearing decoiler with handbrake and steel wheels for movement

Condition: ready for operation (used), Year of construction: 2022, Two brand new and unused Lenze gear motors are available. 1) Lenze GSS06-2, Power: 5kW, Speed: 1450rpm, Torque: 445Nm, Ratio: 20:1, Efficiency: IE3, Duty type: S1, Insulation class: F. 2) Lenze GSS06-2M VAR 112C22, Power: 4kW, Speed: 1450rpm, Torque: 444Nm, Ratio: 20:1, Efficiency: IE2, Duty type: S1, Insulation class: F. Documentation available. An on-site inspection is possible. Hsdpfx Ajynluzji Nsnk

Condition: good (used), Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc. Hnjdpfeyik H Aox Ai Nsk

Condition: used, total power requirement:6,5 kW dimensions of the machine ca.:0,9 x 0,5 x 1,25 m Hnsdpfx Ascxxp Uoi Nek

Condition: used, Lenze electric motor type MDSKSRS056-33, suitable for Reinhardt saws. Hedpew Uh Idofx Ai Njnk