Used Transducer for sale (128)

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  Cedpfsxcwx Hex Ac Nogn The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Technical Data and Performance The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Structure and Components A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Condition: ready for operation (used), smar LD 301 Intelligent measuring transducer, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Csdpfoxah Dbjx Ac Nogn

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Csdpsiq Hxkofx Ac Njgn Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Year of construction: 2009, condition: ready for operation (used), A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Cgedpoxd Avgofx Ac Non

Year of construction: 2023, condition: new, SONDA is an economic solution for gaining an ultrasonic cleaning unit. If you have your own stainless steel tank and want to convert this tank to a ultrasonic washing unit SONDA is the ideal match. We can produce SONDAs regardless of the dimension. What you should do is simply tell us your tank's dimensions and mount the unit to your tank with a simple operation. Operation Principle -Every single immersible SONDA units work with its own Codpjd I E Ivjfx Ac Nogn separate high frequency generator. -Immersible SONDA units are ready to fix on wall of tank. -Ideal for large tanks in coating and surface treatment. immersible transducer, ultrasonic cleaner, transducer, ultrasonic Please feel free to contact us for technical specifications.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 66,963 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, table load: 40 kg, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS B-axis: +110° to -110° C-axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet System Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid Traverse and Feed Rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B-axis: 30 rpm Feed rate C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations occupied): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guideways Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws X, Y, Z axes Ø: 36 mm Pitch: 16 mm Axis Drives Motor rating X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Motor rating B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN (value not specified) MACHINE DETAILS Cgjdpfxswx Iugo Ac Nen Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Standard machine weight: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Electrical Connections Total connected load (standard machine): 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Expanded tool magazine capacity to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, pressurized with sealing air KNOLL coolant system: 1 scraper or hinge belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010) 1 through-spindle coolant supply with KTS25-50T coolant pump, capacity 31 l/min at 70 bar, 5.5 kW, three-stage adjustable pressure 1 external coolant with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flush with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 auger-type conveyors in the machine RENISHAW OMP 60 probing system for automatic workpiece zero-point setting and measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Cjdpfx Ajfgpfmoc Nogn Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: new, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Item number: SH281CCS motor power 1,5/1,8 kW band opening 285 mm band dimensions 2950x27x0,9 mm weight 375Kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230/ 280x200 cutting area 45° right 190 / 180x180/180x180 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description: -Saw band arch, vise unit and base made of resistant cast iron. -Precision degree marking on the cast iron structure -Electrical system (with fully identifiable electrical wiring and low voltage 24 V system) -Switching handle IP 55 for manual cycles (if present) -Rotating scraper brush for the saw band -Closing unit with vice for fast approaching -Accurate stops with adjustment for miter cuts at 0°, 45°, 60° on the left side -bi-metal saw band 2950 x 27 x 0,9 mm -Wrench, instructions for use and instructions for ordering spare parts in the user's language -SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. -CCS (Cut Control System) with (A switch for manual and automatic cutting - B) regulation of cutting speed - C) hydraulic brake with tank - D) end stop for stopping the belt) also available as an option for machines already in production. -Vice with quick adjustment -Hydraulic transducer for belt tension indication -Electric coolant pump for cooling and lubrication of the saw band and manageable coolant tank above the base frame -For the versions with pneumatic vice (MA), the opening and closing of the vice is done with a manual valve (available as an option with pedal control) Csdpocgbp Iofx Ac Nsgn MEP SHARK 281 SXI evo [Semi-automatic] Part number SH281SXI motor power 1,5/1,8 kW belt opening 285 mm belt dimensions 2950x27x0,9 mm weight 435 kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230 / 280x200 cutting area 45° right 190 / 180x180 / 180x180 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Semi-automatic function: Vise closes and motor starts, saw head lowers for cut, motor shuts off, saw head raises, vise opens. Some features: - New centralized control panel on articulated arm. - Latest generation hydraulic control unit, highly efficient and with low energy consumption. - Base with extractable coolant tank. The machine complies with CE regulations in all areas! For further technical data, please refer to the attached PDF document.

Condition: new, Type CK-3000B Height of working table 800mm Working depth 65mm Working length 3100mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Cgedpfjqxtf Dox Ac Nsn Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Cedefzk Ewspfx Ac Nsgn Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Cgedpfxofz I N To Ac Non Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Csdjfz Aw Hjpfx Ac Negn In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Codpfefz Dtzox Ac Negn In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Cgedegd Uifopfx Ac Nsn Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: like new (used), multifunctional tool for checking the safety of low voltage electrical systems SEFT950 Carlo Gavazzi SEFT 950, serial number: 002814/21006, instrument complete with transport bag, cables of various sizes, transducer for converting the measurements stored on the PC, equipment for measurements in medical offices, pegs for step and contact measurements or ground measurements, performs all types of electrical measurements, with an instruction manual. Measure Low-Ohm = Rpe Measure isolation = Riso Measurement of earth and ground resistivity = Re/p Measure LOOP = LOOP Measure RCD = RCD Measure voltage drop = %ΔU Measure the cyclical voltage of the phases = O/V Price Euro 800 + VAT Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Csdpfx Acjg Tdxde Negn Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CN6-15000384, We sell a used Mindray Doppler ultrasound, type DC-60, MFG: 05/2021, serial no.: CN6-15000384, weight 85 kg, Device specifications: Color Doppler ultrasound unit with 21.5’’ FULL HD LED monitor i 13.3’’ LED touch screen 4 transducer ports, HDD 320GB, USB ports, DVD-RW Specifications: PW Doppler, Color Doppler, DirPower Doppler, THI, PSHI, iClearTM, iBeamTM, iTouchTM, Echoboost, FCI, HR Flow, iStorage, WiFi, MedSight, MedTouch Optional: CW, 3D/4D, Free Xros, iPageTM, SCV, STIC, CMPR, Color3D, iLiveTM, Stress Echo, TDI... This equipment has 3 transducers: The Mindray SP5-1N Phased Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Form Factor: Phased Array; Applications: Cardiac; Frequency Range: 1.0 - 5.0 MHz; Compatibility: Consona N-Series The Mindray L13-3 Linear Array transducer has a frequency range of 3.0 MHz. - 14.0 MHz. and supports the following applications: Small Parts, Vascular, Musculoskeletal, Pediatrics. Form Factor: Linear Array; Applications: Small Parts, Vascular, Musculoskeletal, Pediatrics; Frequency Range: 3.0 MHz. - 14.0 MHz. Compatibility: Mindray DC-4 The Mindray C5-1s Curved Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Abdominal, Pediatrics, Obstetrics, Gynaecology. Form Factor: Curved Array; Applications: Abdominal, Pediatrics, Obstetrics, Gynaecology; Frequency Range: 1.0 - 5.0 MHz.; Compatibility: Mindray M9 Cgodpsl E H Unsfx Ac Nen Mindray’s brand-new solution is an excellent fusion of continuous customer insights into clinical needs, combined with continually evolving cutting-edge ultrasound technologies. Full of vitality, with the goal of insight into the future and pursuit of the infinity, it is constantly improving with increased scalability. As an all-around partner, DC-60 Exp with X-Insight devotes to provide a comprehensive solution to help you manage all-aspect daily clinical practice with ease and certainty. Based on the deep insights of customer needs, the DC-60 Exp with X-Insight is designed to deliver high efficiency with precision imaging, which is empowered by eXpress Clarity, eXceptional Intelligence and eXceeding Experience. Price: 19.900 Euro + VAT, FCA Bucharest/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm Cjdpfev Iflpjx Ac Nogn • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers From the beginning It was stored in warehouse in perfect conditions All other technical information and price can be sent upon request. This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage. Cedpfx Ajuigpmoc Negn

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, For sale, used but in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Cgsdpfsvy T Ivex Ac Non Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Cgodpsftm Hrjfx Ac Njn HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Cgjdpfx Aodcmdlsc Non Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, Manual operation Temperature control via a digital thermostat. Csdpfxof Hqayj Ac Negn DIMENSIONS External dimensions: 1490 x 900 x 970 mm Internal dimensions of the cleaning tank: 900 x 600 x 640 mm Usable working dimensions: 870 x 525 x 400 mm Operating height: 970 mm Cleaning tank capacity: 351 l Material: Stainless steel. Thermoacoustic insulation: 50 mm ULTRASONIC Transducer: Piezoelectric Ultrasonic power: 4 KW Ultrasonic frequency: 28 KHz Frequency sweep: YES Power adjustment: 16 positions Heating: 7.5 KW Lid: Manual Drain valve ("): 1 ¼ " Touchscreen: 4.3 " Heating timer: YES

Condition: used, Article Description: Electric Test Cylinder Manufacturer: Zwick / Roell Model: BX1-EZ010.A1K-000 10 KN with test frame control electronics 2 x force transducers test software user manual Cedpswp Hr Sjfx Ac Nsgn Item Condition: used item Scope of delivery as shown in the pictures Contact us if you have any questions Shipping: The stated shipping costs apply to deliveries within Germany Worldwide shipping (please ask for shipping costs outside of Germany) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to a shipping within Germany Sale only to business customers without any warranty or guarantee Deviations from technical data as well as errors in the description of the articles may occur and are reserved.

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Cedpfx Asdcmizoc Negn Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: refurbished (used), Overhauled tensile testing machine model Erichsen 472-500N Force Range: 0-500N Cgedpfendca Rsx Ac Nen Traverse resolution: 0.01mm Test speed: 0.5-500mm/min Truss stroke: 800mm Installation space width: 205mm Dimensions (HxWxD): 1035 x 340 x 320mm Weight: ca.40kg incl. 200N force transducer Force transducer model 713-200N Measuring Range: 0-200N (Optionally, other force transducers possible) incl. new machine control system Controller board with USB port for PC control via Windows incl. software package PM-Soft-Smart PC control and evaluation software for testing machines, executable on PCs with WINDOWS 10 or 11. The modern and powerful test software enables test sequences and evaluations in accordance with the relevant test standards, as well as the self-design of test templates and evaluations with the integrated test template editor and the protocol generator. Hint: The software offered requires a PC with Windows 10 or 11 and a USB interface. Incl. factory calibration of the force transducer in tension and compression direction with calibration certificate