Used Trail Band for sale (9,998)

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Gjdjnxkm Ejpfx Ad Iebp Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: reconditioned (used), Connected load 380V 5.5kW Gsdpfox Ezqbjx Ad Iebp Roller diameter 900 mm Machine height 2950 mm Machine table 1310 x 1020 mm Stop

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Gbedpfxeiamufj Ad Isp Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, roll diameter: 600 mm, saw band length: 4,500 mm, Cutting height 300 mm Cutting width 570 mm Table size 610x700 mm Gbjdpfevt Sxgjx Ad Iop Extraction 120 mm Band saw guide above and below Stop Total height of the machine approx. 2100 mm

Condition: reconditioned (used), functionality: fully functional, Power connection 400V, 1.5kW Godpeittnlsfx Ad Iebp Roller diameter 400 mm Belt length min./max. 2900/3000 mm Cutting height 190 mm Table is tiltable W x H x D: 1000 x 1970 x 730 mm Weight approx. 350 kg

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Gbodpfx Asiw D Uded Isp Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Gsdpfjh Ux Suex Ad Isbp Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: reconditioned (used), Year of construction: 1982, machine/vehicle number: 270018, functionality: fully functional, Rated voltage 380V, 6.6A, 3kW Band saw blade length 5110 mm Gbedpeh Uxq Tsfx Ad Isp Fence Dust extraction port 100 mm Machine table, swiveling with handwheel Foot brake

Year of construction: 1990, condition: used, Power connection: 400 V, 3 kW Glue roller Milling unit: 2x flush-cutting Suitable for edge banding up to 0.4 mm Gbedpfxokkfk No Ad Isp Dimensions (L x W x H): 3150 x 680 x 1250 mm Weight: approx. 400 kg Conversion to 2 mm PVC edge banding possible = additional cost of €1,000.00

Condition: excellent (used), Year of construction: 2015, - Workpiece thickness up to 60 mm - Edge thickness up to 3 mm - Feed speed: 16 - 20 m/min Gjdsw R T Alepfx Ad Ijbp - Total length: 9365 mm - Powercontrol PC23 Units: - Separating agent spraying unit top/bottom - Joint trimming unit 2x 3 kW - Gluing unit with 2-roller magazine - End trimming unit HL 81 0.8 kW - Pre-milling unit FF30 bottom/top; 4x 0.4 kW - Free space for 2 units - Profile scraper PN 10 - Surface scraper - Cleaning agent spraying unit - Buffing unit

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: refurbished by Holz-Her specialist Equipment and technical data: - Basic machine with manual adjustment of the pressure beam Gbedpozk N U Aofx Ad Iop - Extendable workpiece support, distance: 600 mm - Edge milling unit FG 201 with 2 milling heads including diamond milling cutters 70 x 48 x 30 mm, Z 2 - Edge feeder 1903, single infeed, automatic transport of roll and strip material - Gluing system Glu Jet GJ 301 with automatic glue height adjustment (sensing nozzle) - With magazine for glue cartridges - Pressing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Cross-cutting unit 1918, pneumatically swiveling 0-10 degrees - Multi-function milling unit 1827 MOT 4 with pneumatic package including diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter - Scraper blade unit 1929 MOT 2 - Chip collection box - Surface scraper blade FK 701 - Buffing unit 1940 - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 - Feed rate (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: short notice Location: 63934 Röllbach Well maintained

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Roller diameter: 500 mm Motor: 1.8 kW Connection: 430 V Upper precision guide Lower guide Telescopic blade guard Cast band saw wheels Cast table, adjustable up to 36° With automatic motor brake Blade tension indicator Max. cutting height: 260 mm Max. cutting width: 480 mm Dust extraction port: 100 mm L x W x H: 965 x 660 x 1925 mm Gbodpezk N Rkofx Ad Ijp Weight: 280 kg Availability: short notice Location: 63934 Röllbach Condition commensurate with age

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feeder for coil and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Printing unit, pneumatic, with motorized adjustment to edge thickness 1926 Cutting unit, 2-motor, pneumatically pivoting 1918 Gbedpfxszk N Hrs Ad Ijp Milling unit, fixed, up to 30 mm 1962 Milling unit MOT 5 with multi-function capability for flush, radius, and bevel trimming 1966 Radius trimming blade 1927 Corner copying 1983 Surface trimming blade 1964 Chamfering unit 1944 Air nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge band thickness max. 13 mm Weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short notice Well-maintained

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical data: Feed speed, continuously variable: 10-18 m/min Control system: Edge Control 19 with 18.5-inch touchscreen color display Grooving unit Edge feeder Glue application station: cartridge, sensing nozzle with automatic glue height adjustment Pressing unit Cutting unit Multi-function milling unit Copy milling unit Radius trimming unit Straight trimming blade Edge buffing Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300x1500x1600 mm Weight: 2200 kg Location: 65439 Flörsheim Availability: short notice Good Godpfx Adjzk N Eue Iobp

Condition: used, Year of construction: 1989, Used machine Small machine for processing molded parts Processes hot-melt adhesive-coated edge material, which is reactivated using hot air By pressing the workpiece against the central, driven pressure roller, the workpiece is automatically advanced, ensuring uniform adhesive reactivation and reliable bonding Thermostatic temperature control using a dial thermostat Maintenance-free three-phase hot air blower for continuous operation Godezk N Ehepfx Ad Isbp Automatic air flow deflection Pneumatically operated roller separation device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness 10 - 50 mm Heating power 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Edge thickness approx. 0.5 - 1 mm Internal radius min. approx. 25 mm Feed rate 4 m/min. Pneumatics 6 bar Weight approx. 105 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Maximum workpiece height: approx. 40 mm Minimum workpiece length: approx. 250 mm Minimum workpiece width: approx. 70 mm Feed rate: approx. 11 m/min. Gsdjzk N Ebepfx Ad Isbp Ready for operation in approx. 4-5 minutes Power consumption: approx. 11 kW with quick-heating adhesive container Roll trimming pneumatically up to 3 mm with cutoff saw up to 5 mm edge thickness with milling station, optionally equipped with combined indexable milling cutters for radius, straight, and chamfer milling Outrigger, foldable and extendable towards the front with chassis L x W x H 3600 x 1400 x 1200 mm Weight: approx. 670 kg Availability: short notice Location: Flörsheim well-maintained

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control system with 15-inch touch screen - Edge trimming unit with 2 milling heads - Edge feed system - GluJet 301 adhesive application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Pressing unit: pneumatic - Cutting unit: pneumatic - Diamond milling cutters, left + right: with CM technology - Corner copying unit with diamond milling cutters - Surface scraping blade - Buffing unit - Extendable workpiece support - Motorized pressing bridge adjustment with NC axis via program control - Extraction hoods for cutting unit Godpfszk N Dkex Ad Isbp - Multifunction milling unit: MOT 4 - Vertical sensing rollers: pneumatic - Pneumatic pivoting device for milling unit MOT 4 - Scraping blade unit MOT 2 with chip collection box - Spraying device for the infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed rate: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg Availability: short notice Location: 63934 Röllbach normal

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding system - Glue application system, cartridge type - Printing unit, 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit for flush trimming, beveling, and rounding - Radius cutting blade - Buffing unit Gsdpozk N Amsfx Ad Iebp - Edge band thickness 0.3 - 20 mm - Edge band height max. 66 mm - Edge band length min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: short notice Location: 63934 Röllbach Condition appropriate for its age.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: - Pot-type gluing unit - with a 2nd gluing unit for PUR processing - Infeed unit with automatic edge band magazine Gsdpfxszk Nw Ds Ad Iobp - Pressing zone with multiple pressure rollers - Edge trimming: 2 motorized saw units for end/edge trimming - Top/bottom router: 2 routing units with tracer wheels for radius or bevel - Radius scraping blade: pneumatically controlled, for finishing radii - Surface scraping blade: for smoothing edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Rieke spray device - Control system: PLC with control panel - Replacement of the infeed frequency converter by Ott in 2022 - Infeed speed approx. 10-12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 - 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse rating 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight approx. 3,000 kg Availability: short-term Location: Röllbach in good condition

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: Control system with LCD display Swiveling control panel Program memory Manual adjustment of pressure beams Feed system via transport chain Workpiece support, extendable Joint milling unit 1961: - 2 x 2.0 kW - Diamond joint milling cutter for both forward and reverse rotation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed of coil and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Use of PUR adhesives possible Printing unit 1816: - With driven roller - Pneumatic control of the printing unit Cutting unit 1918: - 2 x 0.22 kW - Swiveling from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius and chamfer milling - Motor-adjustable - Air nozzle on the milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius draw blade unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius draw blade Strip draw blade 1964: - Application-controlled strip draw blade - Air nozzle on the strip draw blade Smoothing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Godpfx Aozk Nwwsd Isbp Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed rate: 8 m/min Distance, workpiece support: 470 mm Support plate Ø for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heating time: 3.5 min Power, joint milling cutter: 2 x 2 kW Power, cutting saw: 2 x 0.22 kW Power, milling station: 2 x 0.6 kW Power, corner copying: 0.22 kW Extraction nozzle, joint milling unit: 120 mm Extraction nozzle, milling unit: 70 mm Extraction nozzle, draw blade unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice Condition commensurate with age

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 For pre-coated edge material Edge material up to 1.3 mm With roller capping Gjdpszk Ntlefx Ad Ijbp With edge banding with cutter With flush milling/chamfer milling, top and bottom, with HF motors Location: Röllbach Availability: short-term Condition: commensurate with age

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical data: Gbsdpfx Aezk Nr Ujd Isp With a length of 5500 mm, the Quadromat is the shortest edge processing machine that, with its integrated workpiece return system, enables complete processing of the edge materials. Inside the machine, not only are the longitudinal edges milled, but the end edges are also copied, thus completing the processing. The finished workpiece returns to the operator, eliminating the need for manual rework. with PLC control with a maximum of 20 machining programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on the edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edge strip thickness: 0.4 - 12 mm - min. edge strip length: 400 mm Feed rate 18 m/min with 2 joint milling motors with multi-function milling unit (flush, bevel, radius) with pull blade with crosscut saw with 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2400 kg Availability: short-term Location: Flörsheim in accordance with its age

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for workpieces with an edge height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 rollers for better workpiece guidance - Edge infeed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with cutter (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Glue tank is leak-proof with glue supply from below and fast heating time after machine shutdown - Edge trimming unit: - for the front and rear edge of the workpiece - automatic scanning of the workpiece - pneumatic trimming with cutter for cuttable edges - Edge milling unit - with vertical scanning and horizontal guidance - reproducible adjustment via digital counters - 2 high-performance 0.4 kW high-frequency motors - steplessly adjustable from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central dust extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Workpiece support, continuously approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film platen Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 - 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 - 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Heating power of glue tank: 2.7 kW - Heating time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N Gbjdpfx Adezk Nmrj Iop - Total connection: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without film platen): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Storage location: Flörsheim in accordance with age

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: Gbjdozk Nlhepfx Ad Isp - with new glue application system - Infeed guide rail, manually adjustable - Milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Printing unit 1816, pneumatic - Cutting unit 1822 - Milling unit 1942 M, radius, chamfer, flush - Blowing nozzle, complete - Scraping blade unit 1929 - Chip collection box - Surface scraping blade 1964 - Dust extraction hood set - Protective guards, complete - Overall length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge band thickness, depending on equipment: 0.4 - 5 mm - Edge band height, max.: 55 mm - Edge band length, strip: min. 350 mm - Edge band overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed rate: 12.5 m/min - Extraction: - Dado milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraping blade unit: 280 m³/h - Static negative pressure: - Dado milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Dado milling unit connection: 70 mm - Scraping blade connection: 70 mm - Compressed air: 6 bar Availability: short notice Location: Röllbach age-appropriate

Condition: used, Automatic Horizontal Bandsaw Year: 2011 Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Hydraulic Gbjdpeydv Rrsfx Ad Iep Cutting Capacity: 460MM x 430MM