Used Tos Sn 50 C for sale (91,265)

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor SN:MAC115-04930, used, normal signs of use, 100% functional, scope of delivery as per photos Lhjdpfx Asi D Irhjb Uon

Condition: ready for operation (used), Siemens SINUMERIK 802C 6FC5500-0AA11-1AA0 operator panel version C SN: C-A5E01169222, used, signs of use, 100% functional, scope of delivery as per photos Lhsdpfsxaht Nox Ab Ujn

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 378503, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lsdpfx Asnvyh Njb Uehn

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm - from above: - pawls - pulling shaft, toothed - clamps 2 rows - infeed pulling shaft, toothed - clamp - 510mm planing shaft, 4-knife, 7.5kW motor - clamps - pulling shaft, smooth, outfeed - clamp on the outlet 2pcs - smooth pulling shaft - from below: - clamp - adjustable infeed table + sliding roller - 510mm planing shaft, 4-knife, 5.5kW motor Lsdpfx Aswqchfeb Ujhn - 2 sliding shafts, smooth - side clamp - from the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - 4-knife heads installed at a height of 120mm - spindles adjustable up/down, right/left - smooth feed speed regulation - electric table top lifting - exhaust port diameters 3x150mm, 1x110mm - dimensions length/width/height 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for floor processing – electric table top lifting – Czech production – used planer, very good condition Net price: PLN 36900 Net price: EUR 8680 Net price calculated according to the exchange rate of PLN 4.25/EUR (for larger price may change due to exchange rate fluctuations)

Condition: good (used), functionality: fully functional, Used TOS SUI 50 - 1500 lathe with extensive accessories for sale For sale: robust and precise TOS SUI 50 - 1500 lathe – ideal for workshops, metalworking, and ambitious hobbyists. 🔹 Distance between centers: 1500 mm Ledjwu Dn Iopfx Ab Ujhn 🔹 Swing over bed: 500 mm 🔹 Spindle speed: 14 – 2240 rpm 🔹 Spindle bore: 56 mm 🔹 Dimensions (LxWxH): 3000 x 1300 x 1500 mm 🔹 Weight: approx. 2.9 tons ✅ The machine is used, but in technically good condition and ready for immediate use. 📍 Location: Werdau 📅 Inspection possible – simply arrange an appointment! If you're interested, just get in touch – preferably by message or phone.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 670 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,440 rpm, spindle speed (min.): 1,440 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,620 mm, total width: 3,475 mm, total length: 3,200 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, rotational speed (min.): 18 rpm, table load: 1,200 kg, overall weight: 6,500 kg, workpiece weight (max.): 1,200 kg, bed width: 630 mm, Console Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Control Panel Axis Digital Readout Complete Overhaul Performed in 2025 Warranty: 12 months Availability: IMMEDIATELY AVAILABLE CONDITION OF A NEW MACHINE – COMPLETE OVERHAUL IN GEOMETRICAL ACCURACY ACCORDING TO MANUFACTURER’S SPECIFICATION FGSV 50 – Technical Data: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 3,200 mm Overall width: 3,475 mm Overall height: 2,620 mm Total weight: 6,500 kg Lhjdpoxp Itbofx Ab Usn Total power consumption: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Cross travel Y-axis: 670 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,440 rpm Spindle motor power: 15 kW Max. spindle torque: 2,000 Nm Feed range X – Y / Z: Number of steps / range: 16 / 10 – 1,800 / 2.5 – 450 mm/min Rapid traverse: 4,000 / 1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,200 kg Details of the performed overhaul available upon request.

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories Ljdsfg Ep Depfx Ab Uehn MARCELS MASCHINEN CH

Condition: excellent (used), For sale: Czech-made lathe by Tos, model SUI 50x100, as shown in the photos. The machine is fully operational, connected and ready for testing. Loading is provided. Maximum turning length: 1,000 mm; Maximum turning diameter over bed: 500 mm; Maximum turning diameter over carriage: 320 mm; Spindle bore: 56 mm; Speeds: 14 – 240 rpm; Lighting; Steady rest; Four-jaw chuck; Dimensions approx. 2.5 x 1.2 x 1.6 m. Lodpfxoxfwpks Ab Uohn

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 340 mm, spindle bore: 71 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, spindle speed (max.): 1,000 rpm, overall weight: 3,190 kg, Refurbished Universal Centre Lathe SN 63 Classic-2000mm Lhedpfx Ajxftrhsb Uen Main Features: - Simple and ergonomic operation - Hand-scraped precision guideways – high machining accuracy - Long service life - Low operating costs - Easy maintenance - Capability to cut various types of threads with a wide pitch range Technical Parameters: Swing over bed: 630 mm Swing over cross slide: 340 mm Distance between centres: 2000 mm Spindle: Speed range: 10-1000 rpm Spindle bore: 71 mm Drives: Total power input: 15 kVA Main motor power: 11 kW Coolant pump power: 0.1 kW Rapid feed motor: 0.95 kW Dimensions: Overall length: 4000 mm Width: 1440 mm Height: 1100 mm Weight: 2940 kg Standard Machine Equipment: CE version: Chuck guard Ø 315 mm with safety interlock, front chip guard, rear movable guard, leadscrew cover Metric configuration Spindle nose: Bayonet B8 Spindle bore: Ø 71 mm Four-position tool post Electrical system for 3×400 V / 50 Hz (breaker version) Right-hand carriage operation Bed gap for increased swing (Ø 880 mm over 300 mm length from spindle nose) Rapid traverse Tailstock Main drive motor 7.5 kW Chip tray + coolant system LED work light Foldable X and Z axis handles Colour: RAL 7035-3 / 7016-3 / 6153 Thread cutting gear set Shear pins (3 pcs) Printed user manual

Condition: used, Year of construction: 1960, total height: 1,500 mm, total length: 1,400 mm, total width: 6,050 mm, Empty weight: 4.500 kg Price: On request Lsdpewnhpiefx Ab Uohn - Drive system: Conventional - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 71 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Removable bed - Swing over removable bed [mm]: 880 - Year: 1960 - Documentation available: No - Serial number: - Control: Conventional - Transport dimensions: 1400mm x 6050mm x 1500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm Lhedstv Iklepfx Ab Uon throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Lodpfexpugnex Ab Ushn Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: used, height of centers: 250 mm center distance: 1500 mm Ledpfeuritbjx Ab Uohn max. circulation-Ø over bed: über Bett 500 mm spindle boring: 56 mm spindle retainer: Gr. 8 retainer taper tailstock: 6 MK spindle speed: 11,2 - 1400 rpm forwarding feed: längs/plan 0,027-3,8/0,013-1,9 mm/U thread pitch: 0,5 - 36 mm electrical connection: 380 V, 2 x 5,5 kW space needed: 3600 x 1250 x 1300/1600 mm weight: 3000 kg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Lsdpfx Asw Sx Agjb Uehn

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm Lhjdpfx Abod N Smho Ujn tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, total height: 1,700 mm, total length: 5,100 mm, total width: 1,500 mm, Empty weight: 5.000 kg Price: On request - Drive system: Conventional - Centre height [mm]: 360 - Swing over bed [mm]: 710 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 75 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 1000 - Type of digital readout: Mitutoyo - Documentation available: No - Transport dimensions: 5100mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lhjdpjwqfkvefx Ab Uon VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, turning diameter: 500 mm, turning diameter over bed slide: 500 mm, turning length: 2,000 mm, SUI 50/2000 – swing diameter 500 mm, turning length 2000 mm Lodpfx Abew N D Tre Uehn

Year of construction: 2001, condition: ready for operation (used), Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible. Lhjdpfew Nq R Rjx Ab Usn

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150150900039, center width: 1,500 mm, overall weight: 2,820 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Centre distance: 1,500 mm MACHINE DETAILS Weight: 2,820 kg EQUIPMENT Ledpfx Absw Hwuro Uehn various lathe chucks

Condition: good (used), Defective Ledpfxovpum So Ab Ujhn Can be loaded immediately

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Lhedewvht Rspfx Ab Uon Make: TOS Type: HUR 50 Year: 2015

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Documentation available: No - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lsdpfx Abjwnitio Ujhn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Lhedjdqp Euspfx Ab Uen Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Year of construction: 1979, condition: ready for operation (used), Centre width: 2000mm, centre height: 315mm, turning diameter over bed/cross slide: 630mm/340mm, spindle bore: 80mm, speed: 1000rpm. Machine dimensions X/Y/Z: approx. 5000mm/1600mm/1600mm, weight: approx. 3200kg. An on-site inspection is possible. Lhsdpfxjw Duuwj Ab Uon

Year of construction: 1990, condition: good (used), Vat not included in price. Lhodped Hgf Refx Ab Uon