Used Tool Room Lathe for sale (41,182)

Condition: used, Table size 900 x 460 mm Hodpol Dvx Esfx Afisfn X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm Hfsdpfovcf Hpsx Afijn z-travel:310 mm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg Hsdjvtzkxopfx Afisfn

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm Hfedpovylkcefx Afion total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m technical data please see attachment!

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, Hfsdsvxllkepfx Afien automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1987, x-travel 600 mm y-travel 400 mm z-travel 400 mm spindle taper ISO 40 quill stroke 100 mm spindle turning speed range 40 - 2000 U/min voltage 380 V Table dimensions 800 x 400 mm weight 1,9 t Hedpfx Afjiclmxoisfn total power requirement 3,0 kW dimensions of the machine ca. 1,90 x 1,80 x 1,90 m

Condition: used, Table size 650 x 250 mm X/Y/Z - 400/330/475 mm Spindle speeds 63-2800 rpm Spindle taper ISO 30 Equipped with: 3-axis dro Heidenhain Collet chuck Hsdpsr E Nd Defx Afijfn Various collets - more than 100 pcs. 7 pcs. Vices 23 Toolholders Dividing head w/discs Rotary table 250 mm dia. Angle plate Coolant Lots of other accessories - see photos

Condition: new, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Hedpfx Afjfnh Sgjijfn Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Condition: used, The machine can be inspected at our premises. Hfodsviq Tzjpfx Afisn

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min Hedpeqpl Uujfx Afisfn spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: new, New tool holders for the FAT Wrocław TUR-50, TUR-560, TUR-63, TUR-630, TUR-710, and TUD 40/50 lathes. Spare parts for 4-way tool holders and many other mechanical parts and electromagnetic clutches for metalworking machines are also available for sale. Hsdpfewak Dtex Afijfn The largest selection in Europe. We ship our parts worldwide.

Condition: used, Year of construction: 1992, x-travel 725 mm y-travel 525 mm z-travel 505 mm Hedpfx Aovbwimjfijfn table-size 1000 x 500 mm table load capacity 500 kp spindle taper ISO 40 quill stroke 80 mm spindle turning speed range 25 - 5000 U/min voltage 400 V tool changer made by: Kelch 20-fach CNC-control PHILIPS 3460 power capacity - milling spindle 10 kW total power requirement 18 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit.

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Hfjdpstmtvlsfx Afien Coolant device Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: new, ELMAG WFM 210 Servodrive tool milling machine Incl. 3-axis position indicator Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out. The milling machines in the Servodrive series combine precision and economy and make the heart of every metal technician beat faster. The top ergonomic combination impresses with easy handling, infinitely variable speed control and an excellent price-performance ratio and is ideal for workshops, training companies and toolmaking. Standard equipment: - Digital position indicator - 4 long milling arbors 16, 22, 27, 32 mm - 3 reduction sleeves MK 1, 2, 3 - Operating instructions / CE ADVANTAGES: Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in the cast base - Digital 3-axis position display - Horizontal and vertical milling table Hedpfx Ajtw Akrofiofn - LED milling table lighting - With +/- 90° infinitely variable swivel vertical milling head incl. degree scale - Incl. adjustable drill sleeve - Incl. included central lubrication - Digital speed display of the milling spindle - Rapid traverse on all 3 axes - Tiltable milling head +/- 45° Swivel control panel - Digital position display for maximum precision on all 3 axes - Milling spindle right and left rotation - Digital speed display - Potentiometer for infinitely variable control of the feed axes - Inching switch for rapid traverse of the milling axes - Coolant pump off/on - Emergency stop button TECHNICAL DATA: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Infinitely variable speed steps Quill stroke 65 mm Milling table grooves / width x distance 5 / 14 x 63 mm Vertical grooves / width x distance 3 / 14 x 63 mm Spindle projection 180 - 485 mm Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Milling table surface 750 x 320 mm Table travel X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feed rates X/Y/Z 10 - 1000 mm/min Feed steps X/Y/Z stepless Motor power 3700 W Torque X-axis 7.7 Nm Torque Y-axis 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Length x width 1500 x 1700 mm Height 2000 mm Weight 1450 kg

Condition: excellent (used), control: Heidenhain Positip 850; Hfedpelkgvbjfx Afisn tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 Hfjdpfx Afed Hl Steien weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: good (used), Year of construction: 2010, Big-Bore Toolroom Lathe Haas TL-3B year of manufacture 2010 Main technical data: Swing Over Front Apron: 30″ (762 mm) Swing Over Cross Slide: 18.5″ (470 mm) Distance Between Centers: 60″ (1524 mm) Max Cutting Diameter: 30″ (762 mm) Max Cutting Length: 60″ (1524 mm) Spindle Speed: 650 RPM Spindle Motor: 40 HP Spindle Bore: 8.5″ (216 mm) Chuck Size: 25″ (635 mm) Rear Chuck Size: 25″ (635 mm) X-Axis Travel: 16″ (406 mm) Z-Axis Travel: 60″ (1524 mm) Approx Operating Dimensions (w x d x h): 147″ x 97″ x 79″ Approx Machine Weight: 4400kg / 9624lb Machine under power. Hedpfsxgpx Hjx Afijfn For more information please contact us.

Condition: excellent (used), machine/vehicle number: 205754, Schaublin 135 Toolroom lathe in good condition, Original paintwork with Mitutoyo 2 axis digital read-out. Mach. nr. 205754 * Center height 135 mm * length 630 mm * Turning diameter over bed 355 mm * Turning diameter over cross slide 150 mm Headstock: * spindle speeds, infinitely variable 14 3000 r / min. * Spindle nose Camlock D1 4 " * Spindle taper Morse 5 * Spindle bore 40 mm * reducer for collet * pliers passage 24 mm Thread and feed box: * 48 Metric threads 0.25 to 14 mm * 48 English thread 72 to 1 U /" * 48 Module thread module 0.125 to 7 24 * Powerfeed, longitudinally and transversely from 0.015 to 0.21 mm * 24 longitudinal and cross feeds from 0.025 to 0.35 mm * Click to feeds by using the thread cutter wheels cross slide: * path on the cheek 620 mm * Werkzeugschlittenweg 100 mm * Cross slide travel 180 mm * Height of centers over saddle 26 mm Tailstock: * Pinolenkonus Morse 3 * tailstock quill 120 mm *Lateral 10 mm Hfodpfx Ajmidlkofien Engine: * Speed 750 3000 r / min. *Power 2/4 HP Weight and dimentions: * weight Approx. 1300 kg * Length Depth x Height 1715 x 970 x 1280 mm Accessory in toolcabinet: See pictures. * Mitutoyo 2 axis Digital read-out. * 3 jaw chuck * MULTIFIX with 2 toolpost * change gearwheels * Coolant divice * manual in German To machine: Offered Schaublin 135 is in a very good technical condition. The machine is fully functional. All the guideways are very good and the slides run smoothly and evenly. In all speeds the machine runs quietly. The machine is mechanical and electrical fully inspected and a oilchange is been done.

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Hedsxn Sf Sepfx Afisfn Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2018) Serial Number: SLM00083 Year: 2018 Control: Protrak SLX CNC Condition: Used – excellent condition Hodpfoxc Ipiex Afiofn Technical Specifications: Swing over bed: 560mm Swing in gap: 935mm Gap in front of faceplate: 297mm (max) Swing over cross slides: 350mm Cross slide travel: 290mm Distance between centres: 3000mm Maximum cutting length: 2900mm Spindle bore: 104mm Spindle nose: D1-11 camlock Spindle taper: MT7 in bush Spindle motor: 11 kW (15 HP) Spindle speeds: 30 – 1800 rpm (2 ranges) Tailstock travel: 200mm Tailstock taper: MT6 Tailstock diameter: 105mm Bed width: 500mm Machine footprint (L x D x H): 5220 x 2150 x 1950mm Machine weight: 7400kg Features & Equipment: Protrak SLX control Drilling attachment Quick-change toolpost 3-jaw chuck 4-jaw chuck 3-point steady

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter: 400 mm, spindle bore: 54 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, Equipment: rotational speed infinitely variable, As-good-as-new teach-in lathe for both conventional and CNC turning operations. Includes tool trolley with various cutters, inserts, drill heads, and tapping head. Hfjdpexb A Iksfx Afisn

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive offering speeds from 50 to 4,000 rpm. The demonstration machine is in original condition, so you receive the full warranty. Technical specifications: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove - Spindle and tailstock taper: MK2 - Variable speed control (direct drive): 50 – 4,000 rpm - 24-position indexing - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with graduated scale and trapezoidal thread) - Machine weight: 204 kg - Shipping weight: approx. 225 kg Hedpfxetpph Ss Afiofn The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping by freight forwarder: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, turning bench, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Hjdpfxjxawdkj Afijfn Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2007 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), Year of construction: 2022, EXHIBITION MACHINE For sale is a new TEKNATOOL Comet 2 DR lathe including base frame with a maximum center distance of 400 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data: - Center height 150 mm - Center width approx. 400 mm (extendable) - 3 speed levels (belt levels): 250 - 680 / 530 - 1,420 / 1,380 - 4,000 rpm - Digital display for speed - Spindle connection M33x3.5 with ASR (Euro) drain safety groove - Spindle and tailstock MK2 - Motor 0.6 kW / 0.75 HP - Forward / reverse rotation - Knife support 150 mm - Weight approx. 32 kg - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, turning machine, turning, turning knife, woodturning, turning, machine Hfedevbcm Rspfx Afijn

Condition: ready for operation (used), Year of construction: 2002, XYZ TC250 Vulcan Turning Centre Year of manufacture 2002 Ø250mm 3 Jaw Power Chuck. Max. Swing Ø500mm. Max. Swing Over Cross Slide Ø330mm. Max. Turning Length 650mm. Spindle Bore Ø87mm. Max. Bar Capacity Ø77mm. Axis Travel 'X'=220mm, 'Z'=650mm. Maximum Spindle Speed 3,500rpm (22.5kW Motor). Hfodpfxew U Ekco Afijn Spindle Nose A2-8. 12 Position Turret (VDI 40 Toolholders). *For sale with Jet Machinery Ltd* Stock No: 78992 Serial No: 202068 Price: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.