Used Tool Magazine for sale (37,446)

Condition: ready for operation (used), Year of construction: 2003, feed length X-axis: 900 mm, feed length Y-axis: 450 mm, feed length Z-axis: 565 mm, rotational speed (max.): 1,500 rpm, machine completely rebuilt in 2003 ACURITE 3-axis digital readout automatic lubrication Hsdpfey Sbflox Ag Ijfg spindle taper SA 40, maximum speed 1500 rpm travel: 900 x 450 x 565 mm weight: 3000 kg

Condition: used, Year of construction: 2013, operating hours: 26,721 h, functionality: unexamined, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, table length: 245 mm, table width: 140 mm, SAACKE UW1F Center height: 155 mm Maximum tool diameter: 200 mm Maximum tool length: 270 mm X/Y/Z travels: 530/400/320 mm Feeds: 0 – 15 m/min Table size: 245 x 140 mm B-axis: Rotation range: 240° Rotational speed: 180°/s Grinding wheel interface: HSK-E50 Grinding spindle: Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-axis: Rotational range: ± 15 minutes Maximum speed: 600 rpm Hfedpoyma I Hofx Ag Isg Spindle bore: 32 mm Axis drives: X/Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding wheel changer: 4 positions Three stations on the table (max. diameter 125 mm) One station on the tool carrier (max. diameter 175 mm) CNC control: NUM AXIUM POWER with PC and software for: End mills Profile cutters Clamping systems Drills and step drills Roundness regulation 3D collision control Zero point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 hours Spindle hours: 9,846 hours Scope of delivery: RENISHAW 3D measuring probe mounted on the grinding head Coolant unit Various tools and tool clamping accessories Coolant and filter unit GS Industrietechnik RBAFWT113 ND Coolant filter unit GS Industrietechnik RBAFWT113 ND, year of manufacture 2013 Coolant filter unit BÜCHELE 511006

Condition: like new (used), Year of construction: 2021, operating hours: 6,133 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, total height: 1,800 mm, total length: 2,435 mm, total width: 1,875 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 4,500 rpm, overall weight: 1,970 kg, table load: 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine with high precision, long service life, and maximum operator comfort. Multi-ribbed cast construction ensures full operational performance throughout the entire working area. Control System SIEMENS 840D SL Path Control Working Area X / Y / Z 620 / 350 / 400 mm Drive System 2-stage, high-torque main gearbox with automatic gear shifting Drive power 100% / 25% duty cycle: 5.5 / 7.0 kW Torque 100% / 25% duty cycle: 210 / 340 Nm Infinitely variable speed range 0 - 4500 rpm Digital Feed Infinitely adjustable feed on all axes. Feed range 0 - 2000 mm/min, infinitely variable Rapid traverse 5 m/min Handwheel resolution 2.5 mm (X / Y / Z axis) Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill incl. manual clamp, 80 mm Tool holder SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – Standard Additionally, milling head is movable along Y-axis by 150 mm. For horizontal machining, the milling head does NOT need to be removed—simply slide it into its rear rest position. Fixed Angle Table Clamping surface 820 x 420 mm Hfjdpfxjy R Tcte Ag Iog T-slots: 1 / 14 H7 reference slot 5 / 14 H12, 63 mm spacing Table load capacity: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable on all axes Main spindle motor with spindle speed brake function Oriented spindle stop; vertical and horizontal spindle for tapping cycles without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated scale rings on all axes Precision ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Control cabinet compactly integrated into machine Splash guard cabin with optimal, user-friendly access Safety glass window at the rear of the cabin Open at top—front and right doors, including sliding door at the front with safety interlock Interlocked when unpowered; additional service opening on left cabin side—bolted, removable Freestanding mobile coolant tank, 80 liters Dimensions (LxWxH): 1250x460x200 mm Automatic central lubrication Steel lamella cover for Z-axis guide protection Halogen machine lamp, 24V Easy-to-operate milling guard with plexiglass pane Operator's manual, spare parts list, and electrical diagram in paper form Set of machine feet Transport bar and retaining rings for 2-strand lifting tackle Color: light gray RAL 7035 and telegray RAL 7045, fine texture Space Requirement – Connection Values Machine weight approx. 1970 kg Footprint (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. fuse protection: 35 A NH Network type: TN-S Connection type: fixed connection Further information available in the PDF attachment. The machine is supplied without tools and without accessories.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hedpfx Aey R S Unog Iefg Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Montronix TS100 Tool Monitor SN:T1000022A0964, used, normal signs of use, 100% functional, scope of delivery as per photos Hjdpfxji Eb R Aj Ag Iefg

Condition: ready for operation (used), Montronix TS100 Tool Monitor SN:T1000025A0991, used, normal signs of use, 100% functional, scope of delivery as per photos Hfedpsi Eb R Hsfx Ag Ieg

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Hfjdjy R Srgjpfx Ag Ieg Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Hsdpfxsy R Skco Ag Ijfg Ram Travel 450mm Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW Hedsy Nnxaspfx Ag Iofg quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min Hedpfjy Nnw Nox Ag Iefg power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Hfodjmck Ryspfx Ag Ieg Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Hsdpfxjdzp Tbo Ag Iofg Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Hjdey R N Rmjpfx Ag Isfg Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Hsdpoy R N I Sofx Ag Iefg

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Hfsdpsy R Ebzsfx Ag Ieg Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories.

Condition: good (used), Year of construction: 2016, functionality: fully functional, VIVALDI Wood-Aluminum Window Milling Tool IV78/90 Sloped rebate solution consisting of: - Frame tenon - Frame groove - Frame longitudinal inner - Sash tenon - Sash groove Hsdsy R Dwbspfx Ag Ijfg - Sash longitudinal inner - Counter GU threshold - Rings with anti-rotation device Very flexible tooling solution with split bushings Euro-rebate 24 and 30 mm Wood thicknesses 78 mm (double tenon) and 90 mm (triple tenon) Many glass thicknesses possible Complete set of drawings Was used on a Weinig Unicontrol 10, D=50 mm, stroke 100 mm but can also be used on other machines! Very good condition (unfortunately seldom used) Without sash rebate tools! If you have any questions, please feel free to contact us! Can be inspected on site.

Condition: excellent (used), Tool holder steep taper 45 (SK45) to MK2 (for milling arbors, shank milling cutters, for milling machines). Manufacturer: Bahmüller, Type W640/1 – Wilhelm Bahmüller Maschinenbau Präzisionswerkzeuge GmbH Very good condition Without drawbolt (thread M16), with integrated ejector screw for clamped tool. Hsdjymx Edopfx Ag Isfg Milling tool holder – tool taper for clamping Price €55,-- net ex location plus packaging costs All technical data subject to errors and omissions. We sell exclusively to countries within the European Community.

Condition: excellent (used), Tul-Kelch tool rack Hodpfx Agoy I T S Nj Iefg SK 40 Tool holder SK 40 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Hsdpsy Rxvljfx Ag Iofg

Condition: used, functionality: fully functional, Tool Grinding Machine Manufacturer: DECKEL, Model: S 1 Technical Details Hsdpfxeyw N Tus Ag Iofg Manufacturer: DECKEL Model: S 1 Speed: from 3750 to 7500 rpm Connection: 380 V Machine weight: approx. 400 kg Dimensions (L x W x H): 1.2 x 0.70 x 1.40 m All information provided without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Hfsdpfx Agjtwpyye Ijg

Condition: used, This Nozar IQ Power Tools dry cut saw is being auctioned in our industrial auction / machinery auction – a collective auction of construction equipment, building materials, vehicles, site equipment and garden technology, conducted online. Hjdoy I I Urepfx Ag Isfg

Condition: used, #200103 Trumpf EVO22W10 (28 pieces / without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Without identification groove Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm Total length: 5570 mm ----- #200104 Trumpf EVO22W10 (12 pieces / identification groove at bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm Total length: 2470 mm ----- #200105 Trumpf EVO22W10 (28 pieces / identification groove center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm Total length: 5825 mm ----- #200107 Trumpf EVO26W24 (14 pieces) 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm Total length: 3000 mm ----- #200108 Trumpf EVO24W16 (17 pieces) 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm Total length: 3585 mm ----- #200109 Trumpf EVO20W6 (11 pieces) 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm Total length: 3700 mm ----- #200110 Trumpf EVO22/S-W10 (9 pieces) 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm Hodpfx Aoyx Hxwjg Iofg Total length: 2740 mm ----- #200116 Trumpf EVO28W40 (13 pieces) 86.00° R5.00 / H=100.00 / 1200 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 1x 200 mm 1x 300 mm 4x 500 mm Total length: 2750 mm

Condition: good (used), Pressing tool, sheet metal former, forming tool, straightening tool -Pressing tool: Mounting: Ø 40 mm -Material: 1.2379 X153CrMoV12 cold work steel -Rockwell hardness: 62 HRC Hjdpfx Aey Iwx Tsg Ijfg -Dimensions: 116/83/H340 mm -Weight: 15.6 kg

Condition: used, A large selection of SK40 tool holders, including mounted milling cutters, drills, and threading tools from workshop/industrial inventory, is available for sale. Mainly available: * SK40 shrink-fit holders * SK40 collet chucks / ER holders Hfjdpfxoy Rmfho Ag Isg * SK40 tapping chucks * SK40 screw-in holders / Weldon holders * Various special adapters and milling heads Some holders are already equipped with: * Solid carbide end mills * Thread milling cutters * Thread taps * Drills * Face mills Various manufacturers, diameters, and designs available. Condition ranges from very good to used. ❗ Prices vary depending on the holder, tool, manufacturer, and condition. Therefore, please provide specific inquiries including: * Desired holder * Diameter / type * Ideally with a marked image or screenshot 📍 On-site inspection is expressly preferred to avoid any mix-ups and to allow direct inspection of the tools.