Used Tool Grinding Machine for sale (66,037)

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Control TNC 355C Ncodpfx Adsud Illo Njl

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control Nodpfon Smbrjx Ad Njcl - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. Ncodpfxsxb Uq De Ad Njl PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap Ncsdpfx Aon Smcljd Nel - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Used machine Condition: age-appropriate Table size: 2,600 x 900 mm Maximum usable grinding length: 2,500 mm Nodpfx Adsxwz N Se Nscl Belt size: 7,100 mm x 150 mm 1,100 mm throat on the right Motor: 5.2 kW Shipping dimensions: 4,300 x 1,650 x 1,800 mm Weight: 620 kg Availability: approx. mid/end of January 2026 Stock location: Frankfurt

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, New High-Precision Surface Grinding Machine, Kraft brand, Type FS 16060 SD Grinding area: 1600 x 600 mm Main Technical Data - Grinding length: 1,600 mm - Grinding width: 600 mm - Distance from table surface to spindle center: 820 mm Ncsdpfsyak H Hsx Ad Njl - Table drive: Hydraulic - Table load (incl. magnetic chuck): 1,230 kg - Table speed, infinitely adjustable: 5–25 m/min - Max. table travel: 1,700 mm - Max. cross feed speed: 2,000 mm/min - Maximum cross travel: 610 mm - Max. vertical feed speed: 2,000 mm/min - Grinding spindle motor: 22 kW - Grinding wheel dimensions: 500 x 75 x 304.2 mm - Grinding spindle speed: infinitely variable - Machine weight (net): 8,500 kg - Machine width: 7,500 mm - Machine depth: 3,400 mm - Machine height: 2,700 mm - Electrical connection: 400 V / 50 Hz Features: see attachment. Standard Accessories: - 1 Standard grinding wheel 500x75x302.4 mm - 1 Standard wheel flange - 1 Wheel dresser incl. diamond dresser - 1 Balancing arbor - 1 Balancing stand - 1 Machine lamp - 1 Set of machine tools - 1 Documentation package incl. spare parts list - Machine in CE version (Metric version) Equipment features: - Surface grinding machine with automatic vertical feed - Grinding cycle: roughing – finishing – spark-out - Siemens S700 touchscreen panel and electronic handwheel for Y-axis - Digital readout for vertical axis Y and cross axis Z - Grinding spindle drive 22 kW (including stepless speed regulation) - Electro-magnetic chuck combination (L 1600 x W 600 mm) - Magnetic plate supply unit - Coolant filtration system (incl. coolant tank, paper band filter, and pressure pump) Installed special accessories: - 1 Additional wheel flange for 500 x 75 x 302.4 mm grinding wheel - 1 Full enclosure. Completely closed machine cover with manually operated sliding doors incl. safety interlock - 1 Wheel dressing unit mounted on the spindle head (for straight dressing of the grinding wheel) - 1 Coolant mist extraction unit incl. base frame Precision and surface quality at an optimal price. Fully equipped and ready for grinding, suitable for universal use in a wide range of industrial and application sectors.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, New High-Precision Surface Grinding Machine of the “Optimal” Series Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding process: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital readout on vertical axis Y and cross axis Z ● Table cover and splash guards made of stainless steel ● Electrical control cabinet mainly equipped with Siemens components Ncodpeyak Dlsfx Ad Nsl ● Including handwheel dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load capacity kg 180 Longitudinal movement X Table speed, infinitely variable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. traversing speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. traversing speed mm/min 460 Grinding spindle/grinding wheel Grinding spindle drive power kW 2.2 Grinding wheel dimensions mm 200x20x31.75 Grinding spindle speed (speed control optional) rpm 2850 Dimensions Net machine weight kg 1800 Machine dimensions (incl. table movement) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All models include standard accessories: ● 1 standard grinding wheel ● 1 wheel arbor ● 1 dressing block incl. diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation including spare parts list ● CE-compliant machine (metric version) Precision and surface quality at an optimal price. Fully equipped for universal use in a wide range of industrial and application sectors.

Condition: good (used), G&N Kugelmüller MPS 1 Cup Grinding Machine from University Ncodpfx Adsyc Hmno Njl - Spindle speed 3150 rpm - Grinding height above magnet approx. 130 mm - Magnetic chuck 200x100 mm - Side-mounted wheel dresser - Fine adjustment - Drive motor 0.6 kW - Machine enclosure - Documentation Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150 kg Subject to errors and input mistakes.

Condition: good (used), Rotary Table Surface Grinding Machine ARTER A3 - 16 - Max. grinding diameter: 450 mm Nodeyc Hkyjpfx Ad Njcl - Grinding height: approx. 220 mm - Workpiece weight: approx. 250 kg - Automatic feeds - Coolant system - Machine enclosure - Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight 3500 kg Subject to errors and typos.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Used grinding line for circular saw blades Nedoxx Ix Aspfx Ad Necl Model: 2 × PRESTIGE (HSS/CERMET grinding machines) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Saw blades: Ø250–630 mm

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine with many accessories available at a low price. This machine is in very good condition and is fully functional. It was purchased as a completely overhauled unit in 2019. Price greatly reduced!!!!! Nsdpfewkt Euox Ad Nscl

Condition: new, Year of construction: 2026, Surface Grinding Machine 400 × 1000 The 400 × 1000 surface grinding machine is an advanced solution designed for high-precision flat surface grinding in the machine-building industry. Equipped with automatic feeds on all three axes and a digital readout system, it ensures excellent machining accuracy while maintaining a rigid and robust construction. A key advantage of this magnetic surface grinder is its ability to handle heavy loads up to 600 kg, making it a reliable choice for demanding production applications. Construction and Performance The machine is built on a heavy-duty bed construction that provides high rigidity and effectively minimizes vibrations during operation. The spindle runs at 1450 rpm and is mounted on precision bearings, ensuring stable operation of the grinding wheel with dimensions 350 × 40 × 127 mm. The hydraulic system controls the longitudinal table movement within a speed range of 7–23 m/min, while automatic cross and vertical feeds enable precise motion control. The 406 × 1020 mm working table, equipped with an electromagnetic chuck, facilitates secure workpiece clamping and enhances operational safety. An integrated coolant system with a 0.14 kW pump efficiently dissipates heat, preventing thermal distortion and ensuring dimensional stability. Precision and Productivity Precision is achieved through advanced feed mechanisms and accurate control systems. The automatic intermittent cross feed (0.1–8 mm) and vertical feed increments down to 0.005 mm allow machining tolerances below 0.01 mm, which is essential for components with high dimensional requirements. Productivity is further enhanced by a maximum table travel of 450 × 1130 mm and a cross feed speed of up to 990 mm/min, enabling efficient machining of large surfaces without compromising accuracy. The grinding wheel operates at an optimized speed, ensuring uniform material removal, reduced wheel wear, and a surface finish of Ra below 0.2 μm. The three-axis digital readout system eliminates manual positioning errors, shortens setup time, and increases throughput in production cycles. Technical Data Working table size: 406 × 1020 mm Maximum table travel: 450 × 1130 mm Table T-slots: 14 × 3 mm Longitudinal table speed: 7–23 m/min Maximum distance from table surface to spindle center: 570 (460) mm Maximum load capacity (including chuck): 600 kg Automatic intermittent cross feed: 0.1–8 mm Rapid cross feed: 990 mm/min Handwheel feed (cross): 0.02 mm (0.001") per graduation 5 mm (0.2") per revolution Grinding wheel dimensions: 350 × 40 × 127 mm Grinding wheel speed: Ncsdpfxeycqwws Ad Nol 1450 rpm Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid vertical feed: 480 mm/min Handwheel feed (vertical): 0.005 mm (0.0002") per graduation 1 mm (0.04") per revolution Spindle motor power: 5.5 kW Hydraulic oil pump motor: 2.2 kW Coolant pump motor: 0.14 kW Vertical drive motor: 1 kW Cross feed drive motor: 0.04 kW Machine weight: 4000 kg Machine dimensions (L × W × H): 3300 × 2400 × 2000 mm Standard Equipment 3-axis digital readout Electromagnetic table 406 × 1020 mm Grinding wheel Grinding wheel balancing arbor Grinding wheel flange Tool kit 24V machine lighting Coolant system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,680 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, total height: 2,500 mm, total length: 2,700 mm, total width: 2,000 mm, working range: 1,680 mm, spindle motor power: 2,200 W, number of clamping sleeves: 12, Equipment: documentation/manual, 4-axis CNC machining center ISEL Sonderanlage - 06/2007 X1680 Y1000 Z600 – spindle 2.2 kW / 15,000 rpm – table 1660×1750 mm – 4th rotary axis Ø1660 L1750 mm – PC + MAYKA (installed on integrated PC) Nodpeycqu Nefx Ad Necl Ready for use, operational and can be demonstrated under power. Location: Industrial zone 06510 CARROS CNC machining center / milling machine, 4-axis, brand ISEL (isel automation – Germany). Special custom-built machine “Sonderanlage” (manufacturer’s plate), year 06/2007, Serial No. 293215/1, CE marked. Primarily used for precision foam machining, but this is a true CNC machining center: the range of materials depends mainly on tooling and process parameters. Dimensions: length 2.70 m - width 2 m - height 2.50 m. Operating hours counter not accessible in this configuration. Mayka installed and fully functional on the PC. Last tested 13/01/2026: all axis movements OK. Can be inspected and tested onsite: axis travel and start-up possible. Chip extraction included but non-operational (requires servicing). Operating hours: not available (counter inaccessible) Travel: X 1680 mm / Y 1000 mm / Z 600 mm Usable table: 1660 × 1750 mm (T-slots / clamping) 4th rotary axis included: Ø 1660 mm, length 1750 mm Drive: ball screws + belts, linear rail guides Drives: servo motors Spindle ISEL F8LI2S2/-8-043: 2.2 kW, 15,000 rpm, manual tool change Tooling included: 1 tool holder + 11 collets (spindle-specific system) + clamping nut Cooling: spindle air cooling + chiller present Safety: fully guarded machine + emergency stop Noise: approx. 50 dB during operation, 65 dB during Y-axis movement Power supply: 400V three-phase, 16A – compressed air not required Lubrication: none Control / PC / Software Electrical cabinet included Integrated PC + monitor + keyboard (Windows 7) MAYKA installed and functional on integrated PC (no separate dongle/USB key required) Maintenance / service history • March 2019: PC replaced • March 2019: all drive belts replaced • March 2019: iCCE10 CANopen PCIe card (1 channel) replaced • Last test: 13/01/2026 – all movements tested and operational Brand: ISEL Model: Sonderanlage Year: 06/2007 Serial no.: 293215/1 Axes: 4 (with 4th rotary axis) Travel: 1680 × 1000 × 600 mm Table: 1660 × 1750 mm Spindle: 2.2 kW – 15,000 rpm Supply: 400V three-phase – 16A PC/software: integrated PC + MAYKA

Condition: ready for operation (used), Year of construction: 2017, operating hours: 135 h, functionality: fully functional, machine/vehicle number: 6693371/1, travel distance X-axis: 1,480 mm, travel distance Y-axis: 1,090 mm, travel distance Z-axis: 617 mm, total height: 2,320 mm, total length: 2,800 mm, total width: 2,000 mm, working range: 1,480 mm, spindle motor power: 3,600 W, tool diameter: 32 mm, Equipment: documentation/manual, 4-Axis CNC Machining Center ISEL FlatCom XL142/112 EC-Servo – 10/2017 X1480 Y1090 Z617 – 3.6 kW spindle / 17,750 rpm (ER32) – 135.53 operating hours – 4th axis Ø600 L1000 – PC + remote control Ready for use, can be seen powered on Location: Industrial zone 06510 CARROS Machining center / 4-axis CNC milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no.: 669371/1, CE marked. Dimensions: length 2.80m – width 2.00m – height 2.32m Machine in “as new” condition, very little use, fully tested. Hours: 135.53 operating hours 144.04 powered-on hours Axes: 4 axes, with 4th rotary axis (effective diameter 600 mm, length 1000 mm) Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Usable table: 1540 × 1500 mm – T-slot table Transmission: ball screws, linear guideways Drives: EC-Servo motors Ncedeycqm Eepfx Ad Nel SPINDLE / TOOLING ISEL VKH75/26-75T spindle: 3.6 kW, 17,750 rpm ER32 collet Pre-equipped for pneumatic tool changer (ATC): tool magazine not included, but can be added (arrange through supplier) 2 tool holders (1 mounted on the machine) Tool length probe included Cooling: spindle air + included chiller Control / PC / Software ISEL control + REMOTE software License included and transferable No dongle/keys/codes required PC + monitor + keyboard included (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16 A Compressed air required: yes, 8 bar (for pneumatic components) Dust extraction: not included Lubrication: none Enclosure with emergency stop Noise level: approx. 50 dB max Dust extraction port/connection prepared: no Condition / Testing Condition: “as new”, no known issues (play, errors, sensors: nothing to report) Last tested: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software & license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Various clamping accessories + tool length probe Set of end mills / drills included (see photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial number: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travels: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 operating / 144.04 powered-on

Condition: new, Year of construction: 2026, The CORMAK SM75DC belt grinding machine is a high-efficiency industrial metal belt grinder designed for professional metal surface processing where precision and effective dust removal are equally important. Thanks to the integrated extraction system, solid steel construction, and large working surface, the SM75DC model performs excellently in production plants and metal workshops, ensuring a clean and safe working environment. Main advantages of the machine Extraction system with 860 m³/h capacity – effectively removes dust and metal particles during grinding. Two belt speeds (14.5 / 29 m/s) – enable optimal adjustment of grinding speed to the material being processed. Stable steel base – provides rigidity and vibration damping, improving both working comfort and surface quality. Adjustable grinding angle with lock – allows precise positioning of the belt to the workpiece. Quick abrasive belt change system – minimises downtime during retooling. Spring-loaded belt tensioning system – ensures automatic and stable belt tension throughout the operation. Design and technology The CORMAK SM75DC belt grinding machine is designed for continuous operation under demanding industrial conditions. The rigid frame made of thick-walled steel, solid base, and precision belt-tensioning mechanism ensure both stability and long service life. The built-in dust extraction unit with two Ø100 mm nozzles significantly reduces workplace contamination and protects the operator. Precision and performance Ncodeycqitepfx Ad Nel Equipped with a 75 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area for fast material removal and high-quality surface finishing. Two operating speeds (14.5 and 29 m/s) allow the operator to match the speed to the work material – from rough grinding of structural steel to fine finishing of aluminium or stainless steel components. Applications The stationary CORMAK SM75DC belt grinding machine is ideal for: production and industrial facilities, locksmith and welding workshops, surface preparation and finishing operations, deburring, weld grinding, and surface preparation before painting or galvanising. Standard equipment Stable steel base with adjustable tilt Abrasive belt 75 × 2000 mm Built-in dust extraction system with 0.55 kW motor Anti-spark and dust shields Tilting protective guard Technical data Abrasive belt dimensions (L × W) 2000 × 75 mm Belt speed 14.5 / 29 m/s Motor speed 1420 / 2840 rpm Main motor power 2.2 kW Extraction motor power 0.55 kW Extraction capacity 860 m³/h Extraction nozzle diameter 2 × Ø100 mm Power supply 400 V / 50 Hz

Condition: used, Year of construction: 1964, 200 mm mechanical ja weight 1,5 t Njdpfx Asyacnvod Nscl ja

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Nodsmck Ryspfx Ad Njcl Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 1999, Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine -Manufacturer: CUOGHI AFFILATRICI, drill grinding machine type APE60 with point thinning device -Drill chuck: up to Ø 60 mm -Grinding discs: Ø 200 x 45 x 32 -Coolant system: present Ncsdpfoyab Syox Ad Nsl -Accessories: incl. tools (see photo) -Dimensions: 860/880/H1300 mm -Weight: 275 kg

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm Nedjv Hqlrjpfx Ad Nocl • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: refurbished (used), Year of construction: 2026, Manufacturer: TSCHUDIN Machine type: SL 105U Nedpfsd Adfuox Ad Necl Year of construction: 2024 Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Center width: 1000 mm Grinding length: 1000 mm Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Nsdpfxecgtp Ej Ad Njcl Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Grinding wheel right: 250 x 25 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: new, Year of construction: 2026, functionality: fully functional, Data Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 380 mm Ncsdpfx Adjcgkuro Njl Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Wheel dresser Ncodpsyabt Dofx Ad Njl Misc. accessories MARCELS MASCHINEN AG

Year of construction: 2021, condition: like new (used), As-new deburring and grinding machine Model: VKUE 150 Capacity: 150 liters Nodpeyabrajfx Ad Njcl Incl. grinding stone Year of manufacture: 2021 Incl. water filtration system

Condition: used, Technical data: Speed: 3000 1/min Connection: 400 V Motor power: 0,37 kW Ncedpfx Aepz Ibwed Nol Dimensions, approx.: 680 x 380 x 380 mm