Used Tomcat Stick Edge for sale (4,372)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Gkedpfx Akjzz Nnkj Ujb Year of manufacture: 2009 Machine length: 3.7 m

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts Gksdpfjzk Nmrsx Ak Ujb - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Gedpfx Akszwlnrj Uokb Full line has less than 2000 working hours Very good condition Available for inspection

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis - 1 HKS 63 vertical electric spindle (6.6 kW) - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC Gkedpszza Rvefx Ak Ueb

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, Gkodszxz Taepfx Ak Usb 150mm wide abrasive belt, Oscillation, Angle-adjustable table, Used machine, ready for operation.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Gsdpfx Aewhi Slok Uekb Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 6-disc glass grinding and polishing machine. In excellent working condition! 6 discs Glass thickness: 3 - 35 mm Minimum glass size: 40x40 mm Speed: 0.5 - 5 m/min. Power: 16.5 kW Power supply: 400V Gkjdpfezzrrxox Ak Uob The machine is in excellent technical condition and can be viewed, tested, and purchased by prior arrangement.

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 Gksdpfxjzk N U Ao Ak Usb - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Gkjdszy E D Sjpfx Ak Uob Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise Godjzlbpzepfx Ak Ujkb - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Gksdpfx Akjzmy N No Ueb Feed speed 8 m/min. Weight 900 kg

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Gkjdpfx Akozk N Eus Ueb Printing unit Trimming unit Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: like new (used), Sanding belt height: 200 mm Mechanical oscillation of the sanding belt Raising/lowering of the sanding unit controlled from the control panel Main motor power: 2.5 kW Possibility of sanding using a platen or flat surface Adjustable table angle Gedpjzxyfnsfx Ak Uekb Capability to sand curved elements 380 V Year: 1998

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,500 mm, total length: 3,200 mm, total width: 1,100 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, – Made in Italy – Year of manufacture: 2018 – Preliminary milling – Technical documentation, CE marking TECHNICAL SPECIFICATIONS: – Edge thickness: 0.5 - 3 mm – Wood veneer thickness: 0.5 - 5 mm – Element height: 8 - 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed rate: 7 m/min – Operating temperature: 190° - 220° – Preliminary milling – Glue application roller Gjdezzzr Ijpfx Ak Uskb – Guillotine for preliminary edge trimming – Saws for final edge trimming (front/rear) – Milling (top/bottom) – Radius edging – Straight edging – Polishing units – Air blow for each unit – Operating pressure: 6 - 8 bar – Table height from base: 900 mm – Nozzle diameter: 2x 60 mm and 2x 80 mm – Transport dimensions (L/W/H): 320 / 90 / 150 cm – Weight: ~650 kg

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Gksdpfjznuxbjx Ak Usb Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 Gkedpfxsy Sap Ao Ak Ueb - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Year of construction: 2022, condition: excellent (used), Manufacturer / Model Voorwood L115M (H) with return conveyor Machine Type: Edge Foiling / Profiling / Sanding / Grooving Line with Return Conveyor Overview High-production edge finishing machine capable of profiling, sanding, grooving and applying decorative foil to panel edges and drawer side groove in a single pass. Includes return conveyor system for continuous single-operator workflow. Key Features - Single-pass shaping, sanding, and foil application - Up to ~8,000 lineal feet per shift - Return conveyor system for continuous production - Bottom feed chain with non-marking pads - Digital readouts for fast setup - PLC touchscreen controls - Temperature-controlled foil application with auto disengage Conveyor System - Receiving rollers: 5–100 FPM - Transfer belts: 115 FPM - Return rollers: 90 FPM - Adjustable working height: 29”–40” - Handles material up to 2½” thick - Independent motors for receiving and return Machining Stations Shaping: 5 HP motor, adjustable spindle Sanding: precision sanding spindle Foiling: 8” wheel, temperature controlled, auto tension Grooving saw: 8” blade, 3 HP motor Capacity - Feed speed: 2.4 – 10.7 m/min - Thickness: 3 – 51 mm - Minimum part size: 76 × 76 mm Utilities - 3-phase power - Dust extraction: 3 × 127 mm ports - Approx. 400 CFM required Ideal For - Drawer sides Gkodpfx Aksyvcw Ao Ujb - Cabinet manufacturing - MDF edge finishing - High-volume production

Condition: ready for operation (used), Rehm Tiger 210 DC Welding Machine Manufacturer: REHM Model: TIGER 210 DC Welding processes: WIG DC / MMA Welding current WIG: 3–210 A Welding current MMA: 3–170 A WIG 100% duty cycle: 175 A (20 °C) WIG 100% duty cycle: 140 A (40 °C) MMA 100% duty cycle: 160 A (20 °C) MMA 100% duty cycle: 120 A (40 °C) Mains voltage: 230 V / 50 Hz You are welcome to visit us for a viewing. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Gsdpezy Eqlsfx Ak Uskb Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Gkedpjzuwyzsfx Ak Usb Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - MAGELIS control system - for EVA-based hot-melt adhesives - Jointing: 2 × 1.5 kW, u = 12,000, 200 Hz - Cross-cut saws: 2 x 0.2 kW, automatic tilt 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper blade - Surface scraper blade - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm Gedpfx Akszk Nt Ej Ujkb - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: at short notice Storage location: Baden-Württemberg

Condition: used, Year of construction: 2016, operating hours: 12,415 h, total height: 2,200 mm, total length: 9,050 mm, total width: 1,200 mm, Colour: White Weight: 4.800 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 109/1-606 - Operating hours: 12415 - Number of units [pcs]: 11 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1914 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: KA701 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1828 - - Tools available: Yes - └ 6th unit type: Fine milling unit - - Type/Brand: FR701 - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Type/Brand: FF701 - - Tools available: Yes - └ 8th unit type: Radius scraping unit - - Type/Brand: ZK501 - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Type/Brand: 1856 - - Tools available: Yes - └ 10th unit type: Brushing unit - - Type/Brand: ES701 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 20 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Max. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Options: Return transport - Voltage [V]: 400 - Current consumption [A]: 45 - Transport dimensions: 9050mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 4800kg - Transport packages [pcs.]: 2 Gkodpfx Akozhrlfj Ujb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds Godszinpcopfx Ak Uskb - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Gedpfxjzbyt Ee Ak Ujkb Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, total height: 1,600 mm, total length: 5,200 mm, total width: 1,200 mm, Colour: Grey Weight: 1.550 kg - Year: 2007 - Documentation available: No - CE certificate present: No Gkodpfx Akjw Rd Tzs Usb - Serial number: 1328 - Transport dimensions: 5200mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 Gedpezpzy Usfx Ak Uokb max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026