Used Titex Plus for sale (4,931)

Condition: good (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Equipment: rotational speed infinitely variable, All machining operations such as milling, drilling, and thread cutting are performed on the stationary profile, thereby protecting the profile surface. Improved work results through the use of intelligent control technology. Rapid positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives. Thread cutting without compensation chuck. Automatic clamp detection and positioning. Automatic tool magazine with four tool compartments (without tools). Angle head without tools. Modern 3-axis control. Ergonomic operation thanks to the use of a modern inclined bed. No need for axis referencing due to systems based on absolute encoders. Collision avoidance through automatic clamp detection and positioning. The Power Torque milling motor with closed-loop speed control ensures short spindle start-up and stop times. Certified drive-integrated safety functions. Low power consumption through the use of intelligent control technology. Higher energy efficiency due to recirculative coupling of the axis drives. Uninterruptible power supply (UPS). Windows operating system. Ljdpfx Afex Dzftefjta 15.6" panel PC, i3 processor, USB and network connections. Simple and convenient program entry with eluCam at the control panel, even during machining. Online remote maintenance.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, Ljdpevz A Riefx Affjta ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Fitting drilling machine WÜRTH, type Prebomat 192 plus hole row head with 11 spindle, good condition with base cabinet Lsdjv T Rk Uspfx Affeta

Condition: good (used), Year of construction: 2021, 0,4 - 3 mm Ltsdpfx Asxzuxhsffoa Workingpiece thickness from to 10 - 50 mm Feed speed 9 m/min m/min.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Ltsdpfsxzq Ncjx Affoa Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys Ltodpfxovvpago Affoa 2 x stitching heads HK75 1 x Touch screen Navigation control with auto make ready 5 x section feeders 370 with Amrys 1 x cover folder feeder 1554 with Amrys              only 10,000 hours 1 x three knife trimmer 449 with Amrys 1 x Muller Martini Practico stacker

Condition: good (used), Year of construction: 2013, operating hours: 275 h, machine/vehicle number: A300035619, fuel type: electric, color: green, Drivetrain Drive: Wheel Weights Empty weight: 4.900 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.265 cm Condition Technical condition: good Visual appearance: good Other information Lsdpfx Aox Dqn Djffeta Delivery terms: EXW Max. horizontal reach: 605 m Max swing of arm in degrees: 360 Transport dimensions (LxWxH): 3,65x1,2x1,99 Rental currency: EUR Production country: FR Additional information Please contact Sales Department for more information

Condition: new, Year of construction: 2019, cutting diameter 260 mm dimensions of saw-band 2880 x 27 x 0,9 mm cutting speed 15 - 90 m/min 260 mm total power requirement 2,8 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 4,0 x 2,0 x 1,5 m Horizontal band saw - Double miter saw - Micro-spraying system - 40,000 mm infeed roller conveyor - 2,000 to 4,000 mm outfeed roller conveyor Lodpfx Afjx Dnf Hjfsta - Laser cutting indicator

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system Lodpfx Aoxhdz Ejffeta - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Model: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Ltsdpfx Ajwv Tm Nsffsa Operating hours: approx. 3,000 Travel X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Spindle cooler ICS (internal cooling system) 101225ä

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Ljdpoxywh Njfx Affota Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Special Opportunity! From the professional fire department in Münster, we are able to offer you these excellently maintained emergency ventilators / transport ventilators, model "Dräger Oxylog 3000 Plus," including accessories, direct from the first owner! The complete system is in outstanding visual and technical condition and has been consistently serviced. The devices have between 75 and 176 operating hours; the batteries were replaced in 08/2020 and have undergone a maximum of 6 charging cycles. Additionally, each device comes with a complete mounting bracket and charger included—ideal for mobile deployment, enabling quick adaptation in ambulances or helicopters—see pictures. The photos show one sample device; the remaining units are identical in appearance and quality, both visually and technically. Dräger Oxylog 3000 Plus Emergency and Transport Ventilator, AutoFlow, Capnography Mobile ventilator for emergency medical services and hospital use, featuring volume- and pressure-controlled emergency and transport ventilation. Provides patient-specific ventilation with AutoFlow, integrated capnography, data management, and up to 4 hours of battery operation. Suitable for pediatric and adult patients from 50 ml tidal volume. Features & Specifications: • Ventilation modes: VC-CMV, VC-AC, VC-SIMV, PC-BIPAP, SpnCPAP, Pressure Support (PS), and NIV • AutoFlow for automatic flow and pressure adjustment to patient needs • Integrated capnography for real-time monitoring of end-tidal CO2 • Battery operation for up to 4 hours independent use; weight approx. 5.8 kg • Tidal volume from 50 ml – suitable for pediatric and adult patients • EL display with waveforms, measured values, data export, and real-time data transfer • Infinitely adjustable oxygen supply 40–100%; BTPS correction and ambient pressure compensation Fields of Application: • Pre-hospital emergency medicine and ambulance services • Transport ventilation between hospital departments or for intensive care transport • Emergency department and intensive care unit deployment • Non-invasive ventilation (NIV) for appropriate indications Lodpfxsx Dbr Ts Affsta The total system weight including accessories is 15 kg. Shipping via DPD is available at extra cost. Alternatively, you can collect the unit from us during regular business hours. Sale is strictly to commercial customers only; you will receive a proper invoice with VAT shown. Private buyers may purchase the device "on behalf of a client"; a direct commercial sale to private individuals is expressly excluded! The listed price applies to one ventilator unit including accessories as described. For commercial use, all required inspections in accordance with MTK / STK must be carried out before commissioning! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, as well as for any injury to life, body, or health. For questions regarding prices or technical details, please feel free to contact us at the address provided.

Condition: as good as new (ex-display), DISPLAY MODEL For sale is an as-new Drechselmeister MIDI 2 PLUS lathe with a maximum turning diameter of 355 mm. The display model is in its original condition, therefore you receive the full warranty. Technical Data - Center height approx. 178 mm / Turning diameter 355 mm - Distance between centers approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection: M33 x 3.5 (taper MK2) with ASR (Euro) anti-release groove* - Tailstock with 100 mm MK2 quill, trapezoidal thread, and graduated scale! Lsdpjtpn Srofx Affota - (Optional: quill with ER25 collet system for drilling) - Motor: 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER team Related terms: woodturning lathe, lathe, turning machine, woodturning tools, wood turning, turning, machine Reference: R-A0117

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Ledpfsu Ekw Nex Affota Cutting speed: 40/80 m/min.

Condition: excellent (used), Schlebach Mini Prof Plus profiling machine The machine is equipped with: - Hand roller shear RS for cross cutting Lsdpfx Asx A S Ameffeta - Roller shear LS for longitudinal cutting before profiling - Electromechanical length measurement - 400V connection

Condition: good (used), Year of construction: 2003, Machining Centre Manufacturer: Matsuura Model: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Travel (X/Y/Z): 600 x 600 x 600 mm Table size: 500 x 500 mm 6-position pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure unit Internal coolant 70 bar Ltjdoltlx Njpfx Affja 101225ä

Condition: used, fuel type: diesel, axle configuration: 4x4, Year of construction: 2019, operating hours: 3,055 h, Equipment: all wheel drive, Drive: Wheel Rental currency: EUR Please contact KEY-TEC Sales for more information Lodpex A R H Rjfx Affota

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopXLPlusNEU, total length: 351 mm, sweeping width: 460 mm, empty load weight: 27 kg, fuel type: electric, construction height: 1,199 mm, drive type: Elektro, construction width: 480 mm, Scrubber dryer machine Chassis number: imopXLPlusNEU Condition: New unit Technical condition: New Front tyre condition: New Rear tyre condition: New Battery voltage: 24V Battery capacity: 9Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Ledpfox A N Akox Affjta Description: - Productivity (per hour) theoretical max: 1,800 sqm - Battery runtime (100% charge), max. operating time in min.: 85 - Battery charging time (100% charge) – max. time in hours: 5 - The machine is offered including battery and suitable charger

Condition: used, mileage: 102,800 km, power: 103 kW (140.04 HP), first registration: 03/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,675 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Storage Package 2, Composition Colour audio system (radio / SD card interface / USB), electrically adjustable and heated exterior mirrors, wooden floor covering in cargo area, manual diesel particulate filter regeneration, driver assistance system: front and rear parking sensors, chassis: reinforced dampers and stabilizers front and rear, cab floor mats: rubber, vehicle without model designation, emergency call system, digital radio reception (DAB+), spare wheel with original tires including on-board tools and jack, rearview camera, heated washer nozzles and wash fluid level indicator, seat upholstery: heavy-duty seat covers, cab seats: double passenger seat with storage compartment, cab seats: ErgoComfort suspension seat, driver side (20-way seat adjustment), rear step integrated in bumper, reinforced front left door hinges, high wooden cladding in cargo/body area, lashing rails in cargo area – mounted on side walls. Additional Equipment: Driver’s airbag, convex exterior mirror left, convex exterior mirror right, LED indicator lights integrated into exterior mirrors, cab floor covering: rubber, drag coefficient underbody paneling, double headlights, twin-tone horn, entry handle on rear left pillar, entry handle on rear right pillar, driver assistance system: hill start assist, driver assistance system: brake assist (HBA), driver assistance system: crosswind assist, electric front windows, laminated windshield, folding remote control keys (2), A-pillar grab handles, rear wing doors without windows, interior lighting in cab: LED, interior lighting in cargo/body area: LED, high-roof box body with rear overhang, body variant: high roof in body color, fuel tank: 75 liters, radiator grille with upper chrome strip, full-height cargo partition wall without window, adjustable steering column (steering wheel), headlight leveling, truck registration, side marker lights, engine 2.0 liter – 103 kW TDI, Multifunction Display Plus, rear fog lamp, wheelbase 4,490 mm, tire repair kit, low emissions per Euro 6d standard, hinges for rear doors with increased opening angle, sliding door on right side of cargo/passenger area, SCR system (AdBlue technology), electro-mechanical power steering, engine start/stop system, 12V power sockets in cab (2 units), front bumper in gray, cargo area lashing eyes, seatbelt warning system (driver/passenger side), heat-insulating glazing, central locking with remote control and interior operation, permissible gross weight 3.50 t Ledpsxq I Inefx Affsta Subject to prior sale – all information provided is non-binding. The accuracy and freedom from errors of the information given here cannot be guaranteed. Warranty and/or liability is excluded. Deviations from the above description cannot be ruled out. We point out that the object of any purchase agreement that may be concluded will solely be the vehicle in its actual condition.

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 430 mm, turning diameter: 600 mm, spindle bore: 65 mm, rotational speed (max.): 5,000 rpm, feed length X-axis: 270 mm, feed length Y-axis: 100 mm, feed length Z-axis: 750 mm, High-pressure pump for both tool changers. Chip flushing for main and counter spindle. The tool changer for the counter spindle is as new, replaced about 2 years ago. Ljdpfxex A Dnhs Affjta

Condition: used, mileage: 20,000 km, power: 130 kW (176.75 HP), first registration: 11/2024, fuel type: diesel, color: black, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,100 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * Including conversion to double cab vehicle (MIXTO), 6-seater with partition wall * Exterior mirrors, electrically adjustable and heated * Storage package 2: roof console with two 1 DIN compartments and reading light * Air conditioning with manual control in the driver's cab Ltsdpfx Afox Aylvjfoa * Multifunction steering wheel * Seats upholstered in fabric, design "Austin" * Seat heating, left and right, individually adjustable, in the 1st row * Central locking with keyless start system "Keyless Start", without safe lock * 2 USB-C data/charging ports (center console) with increased charging power and 2 USB-C charging ports (middle, windscreen) * 4 speakers: 2 tweeters, 2 woofers * Digital Cockpit Pro * Digital radio reception (DAB+) * Mobile phone connectivity via Bluetooth with inductive charging function * Navigation system * Voice assistant IDA * Wired & wireless App-Connect * Distraction and drowsiness detection * Driver and passenger airbag with passenger airbag deactivation * Hill start assist * Front and rear parking sensors * Electronic Stability Program (ESP) incl. ABS, ASR, EDS, SWA * Electronic parking brake * Front Assist with warning and braking for vehicles, pedestrians, and cyclists * Engine start-stop system with regenerative braking * Multifunction camera * Emergency call system eCall, prerequisite: availability of required mobile networks * Rear-view camera "Rear View" * Intermittent wiper with light and rain sensor * Crosswind assist * Lane keeping assist "Lane Assist" * Traffic sign recognition * Electronic immobilizer * 12V socket in the cab (in the dashboard) * Diesel engine 2.0 L/130 kW (4V) TDI * 6-speed manual transmission * Emission concept EU6e (EA)//WLTP3 N1-III, N2 * Detachable tow-bar (including trailer stabilization) * Battery 520 A (92 Ah) * Double passenger seat bench right, with storage compartment * Cargo compartment lighting: 4 LED spots * Cab floor covering in rubber * C-rails on side walls, partition wall, and roof bow * Deep Black Pearl Effect * Digital tachograph (Smart TCO) * 3-point automatic seat belts with height adjustment and electric tensioners at the front * One front towing eye * Entry handles on rear pillars * Electrical terminal and preparation for function control unit * Vehicle registration with permissible gross weight of 3.5 t * Front wheel drive * Halogen dual headlights * Grab handle on the partition wall in cargo/passenger compartment * Wooden floor and wheel arch cladding in cargo/passenger compartment * Premium interior noise insulation measures * Fuel tank with 75 l capacity * Discover Media navigation system with 26 cm (10.4") color touchscreen display and 4 speakers * Optional infotainment with 26 cm (10.4") color touchscreen display * Long wheelbase (LR) - 4,490 mm * Tire pressure monitoring system (direct sensing) * Dashboard with additional console including 1 DIN slot and 4 extra switch positions * Hinges for rear wing doors with increased opening angle (max. 270°) * Front disc brakes, 16" (diameter 303 mm) * Intermittent wiper with light and rain sensor and daytime running lights with automatic headlight control * Side windows front and rear and rear window in heat-insulating glass (if present) * Side paneling in the cargo compartment made of plastic hollow chamber panels up to roof frame * Sliding door, right, in cargo/passenger compartment * Daytime running light with supplementary driving light and automatic coming/leaving-home function * Laminated safety glass...

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds Ltedpfx Ajcnxa Nsffea for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel path X-axis: 700 mm Travel path Y-axis: 400 mm Travel path Z-axis: 330 mm Lsdox Ap Rnepfx Affeta Spindle speed (max.): 10,000 rpm Rapid traverse X-axis: 54 m/min Rapid traverse Y-axis: 54 m/min Rapid traverse Z-axis: 54 m/min Table dimensions (L x W): 410 x 850 mm Table load capacity: 300 kg MACHINE DETAILS Type of input power: Three-phase current Total weight: 2,200 kg EQUIPMENT Documentation/manual Continuously variable spindle speed Large chip container High-pressure coolant pump through spindle Extraction system Data server in both machines (FTP accessible) Fanuc Program Transfer Tool (software) Manuals

Condition: used, Tenoning spindle 1 St. Number of milling agregates 0 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- Ltodpsxa Hi Nofx Affea 4) Götzinger OBM Plus corner bearing and olive drilling machine -Corner and shear bearings + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping ----- (Technical data according to manufacturer - no gua...

Year of construction: 2023, condition: like new (used), Wittmann TP-PLUS-D-2:M160 (2023) Model: Wittmann Tempro TP-PLUS-D-2:M160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (option 12–16 kW) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized) Cooling: Plate heat exchanger, cooling water connection G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 completely independent circuits Standard features: Automatic filling, pressure monitoring, leak-free pump, SSR heating, pump rotation control, mold purge Ledpfx Aoxykn Noffsta Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 100–120 kg