Used Tin Snips for sale (1,836)

Year of construction: 1997, condition: ready for operation (used), 25276F Müller Martini Prima Saddle stitchers with feeder and trimmer Machine number 91.06606 Built in 1997 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Number of heads max 6 Equipment gathering chain & feeder • 9 station gathering track & chain • 8 feeders 370 • 1 cover folder feeder 1529 stitching unit • semko • 2 stitching heads three knife trimmer Podpfx Ahed Nvtpovopp • three knife trimmer 360 knives • 2 sets of knives

Year of construction: 1998, condition: good (used), Built in: 1998 Size: 320 x 400 mm Speed: 12.000 c/h Equipment: • main product feeder Ppsdpfxodym Tqo Ahvep • product acceleration • suction opening unit • 3 supplement feeder • endelement with rejection • control panel • stream delivery

Year of construction: 2003, condition: used, Collector chain & feeder 6 stations 3 substructures double 5 feeder 416 Card gluer Stitching station Stapling station 410 transfer right Stitching wire unwinding device Semko Thickness control / Plus-Minus 3 stitching heads Three-knife trimmer Three-knife trimmer 304 Knives Psdpfx Ahoca Dktjvjpp 2 carbide knives MONICS Inserting machine Transfer belt between trimmer and main product feeder Biliner inserting machine Inline main product feeder 6 insert feeder Delivery Rapido compensating stacker

Year of construction: 2000, condition: used, Mueller Martini 351.0412 unwinding station Ppsdpfx Asc Ruydehvsp Built in 2000

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Size: max 500 x 500 mm min 200 x 120 mm Packet height: max 500 mm min 50 mm Width of film: max 600 mm Diameter of film reel: max 300 mm Film thickness: 12 - 100 mµ Speed: max 1560 c/h Power requirements: 4,5 kW (220/380V, 50Hz) Width: 1000 mm Depth: 1230 mm Height: 2065 mm Weight: 500 kg (approx.) Equipment: Ppsdpfx Ajd N D Ncjhvsp • shrink tunnel 6217 • transport belt 6214 and shuttle worth 6264

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Pedjxgbwzepfx Ahvspp FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: Pedpfot U Rn Sox Ahvepp - immediately available -

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Pedpfjyur Nlex Ahvspp Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Ppsdpfxsk Abpas Ahvjp Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 ASAC Automatic Caliper Control 3715 Reject Delivery Pjdpfx Ahjyufk Ajvspp Automatic Signature Recognition Cameras: ASIR 3 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Conveyor belt Muller Martini 3520 Conveyor belt with escape gate 3520 Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring Pjdpfeyv In Iex Ahvjpp • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Pjdpfx Aownm Ukohvjpp Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, Year of construction: 1980, used, good condition Machine cleaned, fully adjusted, test run performed Manufacturer: Martin Model: T51 Psdsyvvrzepfx Ahvopp Year of manufacture: 1980 Machine no.: 80608 Planing width approx. 510 mm Infeed table length approx. 1380 mm Outfeed table length approx. 1080 mm Tables measured Top precision max. 1/10 mm Jointing fence Auxiliary fence Number of knives: 2 Safety cutter block - strip planing knives Chip removal thickness indicator Electric brake Hollow-straight joint adjustment Extraction port diameter 140 mm Space required approx. 2700 x 750 x 1000 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h Ppedpfx Ahovxfkgjvsp - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: excellent (used), Year of construction: 1994, Tilting Spindle Moulder Manufacturer: Martin Model: T25 Year of manufacture: 1994 Tilting range: -5° to +45° Height and angle adjustment: Electric Ppjdpfxjyvrnre Ahvep Spindle diameter: 2 spindles, 30 mm / 40 mm Power: 5/6 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 1,500 kg

Condition: excellent (used), Year of construction: 2006, Thickness planer Manufacturer: Martin Model: T45 Year of manufacture: 2006 Operating hours: approx. 128 h Planing width: 630 mm Planing height: 2.8 - 300 mm Power: 5.5 kW Ppjdpfeyvq Htox Ahvsp Number of knives: 4 Knife type: Tersa 1 rubber feed roller 1 rubber outfeed roller Height adjustment: Electric Feed speed: 6/12 m/min Table length: 1,260 mm Speed: 5,000 rpm Weight: approx. 1,300 kg

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse Ppsdpfx Ahoytd S Asvsp - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), functionality: fully functional, Double-shaft trimming circular saw. Year of manufacture: 2006 Passage height: 280 mm Cutting height: up to 260 mm Passage width: approx. 1100 mm after the saw spindle Clamping width: up to approx. 600 mm total Drive motor for saw spindle: 90 kW each Specification: - Infeed chain bed with toothed roller chain 16B-1 and electric drive motor 5.5 kW - 1x hydraulic pressure roller in front of the trimming saw - 5x heavy-duty, jointly positionable rollers in the infeed and outfeed areas, electrically powered - 1x bottom saw spindle with electric axial adjustment, 1.1 kW - 1x top saw spindle, electrically height-adjustable with 1.1 kW Pjdpfxoyvh Tdo Ahvopp - Control cabinet - Automatic infeed - Chip separator

Condition: used, Year of construction: 1996, The Mueller Martini Prima is a robust and efficient saddle stitcher designed for high-quality binding tasks. Manufactured in 1996, this machine is currently in production and located in Germany. It features a feeder system with four 370 feeders and one cover feeder with a capacity of 1529. The Prima is equipped with a stitching unit that includes two stitching heads, ensuring precise and reliable stitching. It also features a three-knife trimmer, type Mueller Martini 360, for accurate trimming of bound materials. The delivery system, type Mueller Martini CS 20, allows for versatile delivery directions, both left and right. With a runtime of 25,000 hours, the Prima is a durable and dependable choice for high-volume binding tasks. It can handle materials with a size of 480 x 320 mm. Optional features such as a center-cut device, additional stitching heads, and compressors are available upon request, enhancing its versatility and functionality. Format: 480 x 320 mm Equipment: Feeder Number of feeder: 4x 370 Cover feeder: 1x 1529 Stitching unit Type: Mueller Matini Prima 2x stitching heads Three knife trimmer Type: Mueller Martini 360 Delivery Type: Muller Martini CS 20 Serial number: 97.01006 Delivery direction: Left & right Optional (available on request) Center-cut device Additional stitching heads Compressors Runtime 25.000 h Ppedpfswcqymex Ahvjp The machine can updated to 5 stations ( the feeder is included with the machine)

Condition: used, Year of construction: 2006, functionality: fully functional, Emco Machine Package for Sale! For sale is a package of 2 lathes including ALL tool holders and clamping technology! - 1 Emco 665 MC Plus with counter spindle and 2 turrets, year 2006, including 4-meter FMB Turbo 8-80 bar feeder, year 2006. Runs without any issues. - 1 Emco 332 Big Bore with counter spindle and 2 turrets, year 2001, including 3-meter FMB 5-55 Turbo bar feeder, year 2016. The 332 currently has a fault with the upper turret when engaging the driven tools (probably the coupling hub is defective). Estimated repair cost for this is approx. €5,000. Therefore, we have significantly lowered the price for this package. Otherwise, this machine also runs without any issues! Both machines are in daily operation and can be viewed under power. The machines have been used in a single-shift operation. Podpfxoyifnho Ahvjpp As we are selling both lathes as a package due to a system changeover, this offer includes a large quantity of tool holders, clamping devices (for all machines), and bar feed technology for all loaders, which are not listed here individually due to the sheer volume! Dismantling and loading the machines onto customer-provided trucks can be organized for a small additional charge. As we have now reduced the price significantly, both machines will be sold for the fixed price stated here. This offer is valid for 10 days—after that, the machines will no longer be available for sale and will remain in our production.

Condition: not inspected (used), functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, total height: 600 mm, total length: 700 mm, total width: 500 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Podpfx Aheyr Nvwevopp Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 600 mm Machine weight: 150 kg External reference: Lot 78

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine Psdpfx Ahoyr Hk Sjvspp case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System year 2021

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Year: 2025 Description: - Compensating stacker Psdpfxeyr E Dke Ahvjpp - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, used, excellent condition cleaned, function tested, completely readjusted, trial planing partially overhauled Brand: Martin Ppjdpfx Aheyu U Eisvsp Model: T 41 Planing width approx. 630 mm Planing height approx. 250 mm Sectional pressure beam Rubber feed roller Infinitely variable feed rate 8-20 m/min Number of knives: 2 pcs Extraction connection D 140 mm Required space approx. 1000 x 1100 x 1200 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without any warranty or guarantee

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram guard Table extension Height adjustment hydraulic Tilting adjustment hydraulic Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Pedpfowkvw Tex Ahvopp Delivery in as-inspected condition, without any warranty or liability