Used Tig Welding Machine Portable for sale (86,730)

Condition: good (used), Item number MA1162 Pgsdelz Navepfx Adnow Manufacturer PEI Italy Type PB 30 Year of manufacture approx. 1998 Length [mm] 1000 Width [mm] 300 Height [mm] 1250 Weight [kg] 200 Connected load 380 V / 30 KVA Throat [mm] 420mm

Condition: excellent (used), Year of construction: 2006, operating hours: 1,000 h, machine/vehicle number: 233229, Electrode power max.at 6 bar 7000N Machine dimensions W 5.315 x L 6.199 x H 2.435 Pedpfx Adjitcp Ienjgw Weight 4,5t

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Pgjdpfxoxytpcs Adnew Device for quick change-over of profile positioning blade. Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Condition: excellent (used), Year of construction: 2007, Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0,2 -2 mm - support arms - PLC driver Pjdpfxsxqdy To Adnogw

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 250 kg, type of cooling: water, From business closure: Ewm Wega 401 DW Device has been function tested! Year of manufacture: 2010 4-roller wire feeder Water cooling 2/4-stroke mode Podjxyqqqspfx Adnsgw 8-meter intermediate hose package Wire feed case Torch 4 meters + wire + ground cable + pressure regulator Dimensions in mm approx. 1200x460x960 Weight 250 kg

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Pgsdpfx Ajxyqn Ajdnsw Throat depth: 250mm --- Weld control: Digit 8 --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 1973, condition: used, machine/vehicle number: 261, Machine designation Spot welding machine Stock no. MA742 Manufacturer KUKA TYPE MET 70 R Pgodpfx Adjbb Alwsnsw Year of manufacture 1973 Machine no. 261 Weight approx. 1400 kg size 900 x H 2000 x D 1400mm electrode force 50-350 Nominal power at 50% ED 70 KVA Connected load 77 KVA Operating current at 50% duty cycle 10.5 KVA Secondary short-circuit current 21.4 KA Open circuit voltage in 6 steps 3.55-6.66 V (Changes and errors in the technical data, information and prices as well as prior sale) subject to prior sale)

Condition: excellent (used), Votan Type: Jenoptik Votan W4 Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Laser welding allows you to connect plastic parts precisely, energy-efficiently and quickly. This creates strong and resilient welds that are free of marks on the visible side. This means that plastic welding using laser technology also meets the highest aesthetic demands. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Max. current: 20 A Pedpfx Adjhr Dlisnjgw Main fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, nominal power at 50% duty cycle: 20 kVA, – Capacity 20 kVA – Pneumatic – Extension 450 mm – Control PX1700ECO – Documentation Pgedpfx Asxyl Hgednew – 400V

Condition: used, Year of construction: 2012, Heater Element Welding Machine with Infrared Technology (Upper & Lower Sections) – Year of Manufacture: 2012 For sale is a robust and reliable heater element welding machine equipped with infrared radiators, featuring both upper and lower sections. The system has been previously used for welding two housing halves and is ideally suited for thermoplastic materials or similar applications. Manufactured by MTV, this machine is technically solid and designed for continuous industrial operation. A comprehensive German operating manual is included. Technical Specifications Machine Dimensions Width: approx. 2325 mm Depth: approx. 1350 mm Height: approx. 2130 mm Weight: approx. 800 kg Electrical Connection Data Pgodpfx Adoxyibzensw Operating voltage: 400 V AC Control voltage: 24 V DC Fuse protection: 16 A Frequency: 50 Hz Power supply cable: 5 × 2.5 mm² Pneumatics Operating pressure: min. 6 bar – max. 8 bar (constant) Description / Condition Year of manufacture: 2012 Location: Thuringia Application: Thermal welding of plastic components Previous use: Welding two housing halves Design with infrared heating elements for efficient and uniform heating Very robust machine construction, suitable for industrial applications Overall in good condition. _____ Our terms and conditions (AGB) apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technical condition and wear of the items correspond to their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: good (used), Power: 50 kVA Podpfx Adjpy Dydonjgw Arm design: 520 mm

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar Pedpfx Aovyq Duednegw -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Pgodpfjqay Uvex Adnjw Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, nominal power at 50% duty cycle: 35 kVA, – Capacity 35 kVA Pgjdpfx Ajxyl Haodnow – Pneumatic – Extension 450 mm – Control PX1700ECO – Documentation – 400V

Condition: not inspected (used), throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine! Pgjdpfeuhn Uhex Adnsw

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Pjdpfsht U Snjx Adnegw Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: good (used), Power: 15 KVA Psdpfx Aom Twicjdnogw Execution: 530 mm

Year of construction: 2017, condition: new, The device is new, only tried on!!! Year of manufacture: 2017! Manufacturer: Simsek Full: 16 KVA Execution: 550 mm Psdjixtmwepfx Adnjgw Welding head with cooling!

Condition: good (used), Arm design: 270 mm Podpfx Adopy Dy Ejnsgw Power: 125 kVA

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Pgodpfx Adjuhn Tkjnjw The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: good (used), Welding frame size: 650 x 500 mm Pgedpfx Ajixttyodnew

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Tip: 1300 W / 20 KHz Pgjdpjh Rizzofx Adnjw

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Tip: 1300 W / 20 KHz Psdpfx Adoh Ri Absnsgw

Condition: repair required (used), Full: 63 KVA Pjdpfx Aepy Dx Iodnjgw Arm design: 400 mm The machine is currently not working (control panel missing)

Condition: good (used), Power: 50 kVA Podepy Dypjpfx Adnjgw Arm design: 520 mm