Used Temperature Control Unit for sale (58,347)

Year of construction: 1998, condition: used, Temperature controller, temperature control unit, temperature control unit, modular temperature control unit -Manufacturer: GWK, temperature control device temperature control device teco wi -Type: teco 1000 -Heating power: 18 kW Kfsdpfxoiyzn Ie Affoa -Nominal cooling capacity: 100 kW -Techn. Data: see photo type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

Year of construction: 2025, condition: new, From manufacturer very good quality heat control unit (Thermoregulator) for sale. Technical data: Brand: Churchill ISI-TAN Model: CH18 Heating Capacity: 9kW (oil or water) Cooling: 90C/40 kW Operation Range: 0-90C (water), 0-150C (Oil) Pump: 60l/min (German brand) Kfjdpfjgnlf Hjx Affoa Power Consumption: 10 kW Voltage: 400/50Hz, 3phases VAT and delivery cost is not included

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer Kfjdoddv Itopfx Affea -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: used, Used temperature control unit Item number: 10636 Make Tool-Temp Up to 90°C Kfedpouuacfsfx Affoa Total height 720mm Overall length 730mm Total width 300mm

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) Kfedpfx Afjg Ewwrsfsa -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 185 kg, The oil temperature control unit is new and available immediately Medium: Oil Temperature : 300 degrees Indirect cooling : I2 Heating capacity : 12 KW Ksdpfx Aorazg Usffsfa Weight : 123 KG

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, The temperature control unit from Technotrans is for sale; Medium : Oil Operating temperature: 130 degrees Heating capacity: 6KW Kfodpfjr A Eppox Affoa Cooling capacity: 29KW via plate heat exchanger and solenoid valve More information on request by mail

Year of construction: 2015, condition: reconditioned (used), New price 2015- 15200€ Kjdpfxsdxlnts Affjfa GWK cooling tower Proven completely overhauled by GWK DGUV certificate available

Condition: ready for operation (used), The Deltatherm temperature control device is for sale, of course with the device's operating instructions. All spare parts are still available from the manufacturer. Quantity: 1 piece/ price per device Medium: oil Heating output: 18KW Kjdpfsiw H Ubsx Affsfa Max. temperature: 200 degrees Pump flow rate: 100l/min Discharge pressure: 3bar Dimensions, W: 400mm D: 765mm H: 1310mm Weight: 150KG

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) Kfodpfx Aem Dtm Ajffja - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Kodpfx Afjv E Uirofsfa

Condition: used, functionality: fully functional, The temperature control units – 4 units from Tool Temp with MP-888 controller – are available for sale, equipped with the following specifications: Kfjdpfx Asx Elbqeffoa Medium: Water, up to max. 90°C Heating capacity: 3 kW & 6 kW = 9 kW, with adjustable stages Cooling capacity: 35 kW Pump capacity: 75 l/min, max: 4.5 bar Filling volume: 6 litres Weight: 55 kg Dimensions: 670 mm x 260 mm x 650 mm

Year of construction: 2018, condition: as good as new (ex-display), Frigel Water Temperature Control Units, like new, 400 V, 32 A, up to 90 degree Kfodpei Tx Dnofx Affsa

Year of construction: 2025, condition: new, We are manufacturer of temperature control unit (Thermoregulator), so we are able to produce every capacity devices you need. Kfodpfx Ashby Irjffoa Technical data: Brand: Churchill ISI-TAN Model: CH220x2 Heating Capacity: 20kW (with oil) Operation Range: 300C (oil) Pump: 90x2 l/min,8bar, 1,5kW (German brand) Power Consumption: 21,5 kW Voltage: 400/50Hz, 3phases Delivery cost is not included

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Kedpfxex Ek Rdj Affefa Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: ready for operation (used), functionality: fully functional, TT-188 temperature control units with MP-888 controller from TOOL-TEMP are available for sale; 4 units in stock. Kfsdpjx Db Tkofx Affsa Medium: water up to 90°C Heating capacity: 3KW + 6KW = 9KW Cooling capacity: 35KW Filling volume: 6 liters Mold drainage Pump capacity: 60 l/min, max. 4 bar Weight: 55 kg L: 670 mm - W: 260 mm - H: 650 mm

Year of construction: 2015, condition: excellent (used), The device is for sale: Kjdpsncdwyefx Affofa They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Condition: ready for operation (used), Control Techniques 190U2B300BARAA215320 Servo motor SN:867324 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Kfsdpfx Afjtt Hnkjfea

Condition: excellent (used), Year of construction: 2017, Stainless steel jacketed tank Mixer with variable speed control Temperature tank sensor Kjdpfxsx Dnk Nj Affefa Capacity 300 ltr Mobile on castors

Condition: new, Control Techniques / Emerson 142U2E300BARAA165240 Servo motor, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Kfjdpei D Hpnefx Affoa

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor Serial number: C988A7708 / 3.0 kW 100 Hz Speed 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Kedpfjx Ncalox Affjfa

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor, serial number: C985A6505 / 3.0 kW 100 Hz, 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Kfsdpfx Afox Ncafefea

Condition: ready for operation (used), Fanuc A06B-0033-B675 AC servo motor, serial number: C049P1721, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Kfedox Ip Dnepfx Affoa

Condition: ready for operation (used), Fanuc A06B-0033-B675 AC servo motor, serial number: C153MA017, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kedpfxex Ip Duj Affefa

Condition: ready for operation (used), Fanuc A06B-0034-B575 AC servo motor, serial number: C03YP2518, used, in good condition, 100% functional, scope of delivery as per photos. Ksdpfjx Ip Dzox Affefa