Used Capstan Lathe for sale (5,562)

Condition: used, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,650 mm, mast type: triplex, construction height: 2,660 mm, fork carriage width: 1,030 mm, fork length: 1,200 mm, total length: 23,000 mm, drive type: Elektro, construction width: 1,280 mm, net weight: 4,791 kg, Electric 4-wheel forklift Gbslhccqjt Ddv Ieqsp Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Mast type: Triplex Technical condition: Good Front tires type: Non marking Rear tires Type: Non Marking

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Gslhccjwhylvjqqebp Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Functionality: fully functional, Small manual Turning-machine/Lathe 1IC611V with quick locking collet chuck. Gelhccjwbdmkjqqsbp With Machine 4 collets. More collets is possible to buy, ~25EUR/pc.

Condition: used, 630x4000 Gelhcjcncghscqqobp Under power.

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: ST-38-BG-0101, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,900 kg, TECHNICAL DETAILS Model: STL38H Serial number: ST-38-BG-0101 Year of manufacture: 2011 Maximum working diameter: 32 mm Maximum rotational speed: 8,000 rpm MACHINE DETAILS Rated voltage: 3-phase, 220-240/380-415 V AC Rated current: 100 A Rated frequency: 50/60 Hz Axis control: 8/6 axes Operating air pressure: 4–6 kg/cm² Dimensions: 3,742 x 1,729 x 1,800 mm Gslhewwqzyoccqqobp Weight: 3,900 kg EQUIPMENT Bar feeder: FMB Turbo 5-55

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: HT23372E, turning length: 380 mm, turning diameter: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Turning diameter: 450 mm Minimum spindle speed: 30 - 5,000 rpm Centre height: 230 mm Centre distance: 380 mm Spindle bore: 59 mm MACHINE DETAILS Control type: Yasnac Motor power: 15.0 kW Transport dimensions: 3,000 mm x 1,800 mm x 2,000 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT - Driven tools included Gelhjwvtnmsccqqobp - Bar feeder included - Documentation available - CE marking available

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 68005015 06 0026, spindle bore: 80 mm, turning diameter: 300 mm, turning diameter over bed slide: 500 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Serial number: 6800 5015 Max. turning length: 1,500 mm Swing over bed: 500 mm Swing over cross slide: 300 mm Spindle bore: 80 mm Speed range: 12.5 – 2,000 rpm MACHINE DETAILS Dimensions: 3,100 mm x 1,200 mm x 1,700 mm Weight: 2,000 kg Connected load: 12 kVA Operating voltage: 400 V, 50 Hz Gelhcewvh Axjcqqjbp EQUIPMENT - SONY digital readout - 2 three-jaw chucks (diameters: 250 mm and 310 mm)

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, turning length: 550 mm, turning diameter: 300 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 575 mm, rotational speed (max.): 4,000 rpm, turning diameter over bed slide: 525 mm, TECHNICAL DETAILS Main spindle: 185E collet chuck Sub spindle: 185E collet chuck Turning diameter: 300 mm Turning length: 550 mm Control: Mazatrol T-Plus Standard turning diameter: 276 mm Max. swing diameter: 525 mm Distance spindle nose – turret face: 115 - 690 mm Gjlhcewwqzmjcqqjbp Main spindle speed range: 35 - 4,000 rpm Main spindle drive power: 22 kW Spindle bore: 76 mm Max. usable bar diameter: 64 mm Max. chuck diameter: 250 mm Max. torque: 35 Nm Sub spindle speed range: 35 - 4,000 rpm Sub spindle drive power: 7.5 kW Max. chuck diameter, sub spindle: 150 mm Turret Number of tool stations: 16 Tool holder: VDI 40 Driven tool speed range: 25 - 4,500 rpm X-axis travel: 190 mm Z-axis travel: 575 mm Sub spindle B-axis travel: 585 mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 min⁻¹ Rapid traverse B: 18 m/min Feed range C: 1 - 2,000 °/min MACHINE DETAILS Total power requirement: 34 kVA Machine weight: approx. 6 t Space requirement: approx. 5.0 x 3.0 x 2.5 m EQUIPMENT - Main and sub spindle - Driven tools - C-axis - Various VDI40 tool holders - Driven tools - Kitagawa B-210 power chuck - Collet chuck for sub spindle (185E) - Oil mist extraction system

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, turning length: 3,000 mm, turning diameter: 480 mm, spindle speed (max.): 3,550 rpm, quill travel distance: 100 mm, turning diameter over bed slide: 520 mm, TECHNICAL DETAILS Turning length: 3,000 mm Recommended chuck outer diameter: 250–315 mm Swing diameter over bed: 520 mm Max. turning diameter over cross slide: 480 mm Plan travel: 435 / 405 mm Cross slide travel: 3,176 mm Tool holder shank height: 25 mm Boring bar holder, shank diameter: 50 mm Spindle nose with centering cone (DIN 55026): Size 8 Spindle bore: 78 mm Spindle diameter at front bearing: 120 mm Golhoww E I Isccqqsbp Drive power (max.): 53 kW Max. torque: 630 Nm Speed range: 37–3,550 rpm Speed control: stepless Max. feed rate: 10,000 mm/min Rapid traverse speed: 10 m/min Max. feed force / drilling force: 15 kN Tailstock quill outer diameter: 100 mm Tailstock quill stroke: 100 mm Max. quill force: 14 kN MACHINE DETAILS Drive power: 53 kW at 50% duty cycle Approx. machine weight: 15,600 kg Bed design: VDF slant bed EQUIPMENT - Composite bed structure made of Meehanite cast iron bed and reinforced concrete subframe - High rigidity and damping - 3-point, foundation-free installation - Unobstructed chip fall due to 20-degree slant of guideway cover - Wedge-shaped cross slide for heavy-duty machining - Automatic lubrication system with reservoir

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,324 h, Functionality: fully functional, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 3,250 rpm, TECHNICAL DETAILS Max. swing diameter: 680 mm Max. swing diameter over cross slide: 465 mm Max. turning diameter: 465 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm CNC control: SIEMENS SINUMERIK 840D Main Spindle Spindle head: 220h5 mm Bar capacity: 76/90 mm Spindle diameter at front bearing: 140 mm Chuck sizes: 250 mm Drive power (40/100% DC): 33/22 kW (AC) Max. torque (40/100% DC): 630/420 Nm Max. speed: 3,250 rpm Tool Turret Number of tool stations: 12 Driven tools: 6 Tool holder: VDI 40 Shank diameter: 40 mm Drive power (40% DC): 8.4 kW Max. torque: 20 Nm Max. speed driven tools: 4,000 rpm Tailstock Tailstock quill stroke: 850 mm Center taper: MK 4 Golhccoww E Ibjqqsbp Tailstock quill force: 1,200 daN Guides Ball screw X/Z axis (D x P): 40 x 10 mm MACHINE DETAILS Machine weight with chip conveyor: 8,100 kg Ergonomic control panel: SlimlinePanel Chip conveyor: hinged belt chip conveyor Coolant pressure: 5 bar High-performance coolant pump: 12 bar Connected load: 50 kVA Frequency: 50 Hz Operating hours: 14,828 h Spindle hours: 3,324 h EQUIPMENT - 12-position tool turret, VDI 40 mount - Hydraulic hollow clamping device - Sandvik tool kit - Chip conveyor - Self-centering, hydraulic steady rest SLU 3.1 - Mechanical oil mist separator type AFS 600 - Electric sliding door actuation - Tropical package for ambient temperatures up to 50°C

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: ST-32-BG-0093, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,900 kg, travel distance X-axis: 3,742 mm, travel distance Y-axis: 1,729 mm, travel distance Z-axis: 1,800 mm, TECHNICAL DETAILS Year of manufacture: 2011 CNC: Siemens MACHINE DETAILS Model number: ST L32H Serial number: ST-32-BG-0093 Rated voltage: 3 phases, 220-240/380-415 V AC Rated frequency: 50/60 Hz Maximum spindle speed: 8,000 rpm Maximum machining diameter: 32 mm Dimensions: 1,964 mm x 1,290 mm x 1,800 mm Weight: 3,000 kg EQUIPMENT Bar feeder: FMB Turbo 3-36 Gjlewwqztohccqqobp

Condition: good (used), Year of construction: 2018, operating hours: 6,177 h, Functionality: fully functional, machine/vehicle number: L3M0060, turning length: 450 mm, turning diameter: 300 mm, rotational speed (max.): 4,500 rpm, bar diameter: 69 mm, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. swing diameter: 520 mm Max. turning length: 450 mm Main spindle Bar capacity: 69 mm Spindle nose: ASA8 Spindle motor power: 22 kW Spindle speed: 20 / 42 m/min Spindle chuck diameter: 10″ Driven tools Power: 7 kW Speed: 4,500 rpm Tailstock Tailstock taper: MT5, rotating MACHINE DETAILS Power-on time: 8,666 h Spindle hours: 6,167 h Gslhcjww Ikxecqqobp CNC control: CNC OSP P300LA-e (15″) Weight: 5,000 kg Connected load: 28.6 kVA Total power-on time: 16,620 h CNC control operation time: 8,667 h Spindle run time: 6,177 h Cutting time: 6,004 h EQUIPMENT - Manual presetting device - Roller-type chip conveyor - Rotating MT5 tailstock - High-speed driven tools - CNC control with large 15″ screen

Condition: not inspected (used), Year of construction: 2006, Functionality: unexamined, machine/vehicle number: 244, spindle bore: 82 mm, turning diameter: 350 mm, center width: 1,565 mm, turning diameter over bed slide: 540 mm, spindle speed (max.): 3,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Control: HEIDENHAIN MANUAL PLUS 4110 Gslhccqewvhxyeqjbp Swing diameter over bed: 540 mm Swing diameter over cross slide: 350 mm Distance between centers: 1,565 mm Workpiece weight: max. 1,500 kg Spindle bore: 82 mm Spindle mount: B 8 DIN 55027 Spindle taper: metric 90 Speed range: 0–600 / 0–3,000 rpm Power: 17.0 / 25.0 kW Torque: max. 1,620 Nm Axes X axis travel: 270 mm Z axis travel: 1,565 mm Rapid traverse X: 10,000 mm/min Rapid traverse Z: 10,000 mm/min Feed range: 0.002–5,000 mm/min Tooling Type: Multifix size C Tool cross-section: max. 32 x 32 mm Quill diameter: 80 mm Quill stroke: 200 mm Quill taper: MK5 MACHINE DETAILS Dimensions: 5,000 x 1,700 x 1,880 mm Weight: 3,200 kg EQUIPMENT - technical documentation - 3-jaw chuck (diameter approx. 400 mm) - FORKARDT power chuck with 3 jaws (diameter approx. 250 mm, max. speed: 4,000 rpm) - 2 steady rests - Parat 4-position turret - digital axis drives - coolant system - chip container

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, frequency: 50 Hz, nominal current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A Golhcowx Hktjcqqjbp EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Gbolhowx E Tmeccqqop Lathe with 4 tools only for 3-cylinder crankshaft

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 010947, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 16-T, frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Type: 530 G Control: FANUC Series 16-T Gbslhcewx Ngkjcqqsp Connected load: 5 kVA EQUIPMENT Chip conveyor available Bar feeder FMB Turbo 3-26 available

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT - SONY digital display - Faceplate (diameter: 500 mm) Gbjlhcjwvhxgecqqep - 2 steadies

Condition: not inspected (used), Year of construction: 2004, operating hours: 103,282 h, Functionality: unexamined, machine/vehicle number: 30110C411010, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (min.): 3,150 rpm, turning diameter over bed slide: 600 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 28.07.2025 and 31.07.2025. Gjlhcowvg Ndscqqjbp Includes comprehensive tool package TECHNICAL DETAILS Max. speed: 3,150 rpm Centre distance: 1,100 mm Max. turning diameter: 600 mm Max. turning length: 1,000 mm Turret: 12 tool positions MACHINE DETAILS Dimensions: 6,000 mm x 3,000 mm x 2,600 mm Weight: 8,500 kg Transport width: 3,000 mm Machine number: 30110C411010 Operating hours counter: 103,281.3 h EQUIPMENT - Three-jaw chuck - Technical documentation

Condition: not inspected (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 12.0273 / 121V0308, spindle bore: 128 mm, turning diameter: 530 mm, center width: 3,000 mm, turning diameter over bed slide: 830 mm, spindle speed (min.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the machine punctually between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Max. machining diameter: 530 mm Swing diameter over bed: 820 mm Swing diameter over cross slide: 530 mm Distance between centers: 3,000 mm WORK SPINDLE Front spindle nose (DIN 55027, 55029): B11 / C11 Gbslhccjwu E Icjqqop Spindle bore: 128 mm Taper in spindle (metric): 132 mm Control: HEIDENHAIN MP620 Spindle speed range: 0–400 / 20–1,800 rpm Torque level 1: 2,150 Nm Torque level 2: 430 Nm X-AXIS Travel: 370 mm Ballscrew diameter/pitch: 32/5 mm Rapid traverse: 10 m/min Max. feed force: 10 kN Repeatability of positioning: 0.01 mm Z-AXIS Ballscrew diameter/pitch: 50/10 mm Stroke: 3,000 mm Rapid traverse: 10 m/min Max. feed force: 20 kN Repeatability of positioning: 0.015 mm TOOL TURRET Type: Multifix D Tool profile: 40 x 40 mm TAILSTOCK Tailstock quill diameter: 115 mm Quill stroke: 225 mm Morse taper in quill: Morse 6 MACHINE DETAILS Connection voltage: TN-C 400/230 V Frequency: 50 Hz Installation dimensions: 5,000 x 2,200 x 1,900 mm Weight: 5,300 kg Connected load: 38 kVA EQUIPMENT With technical documentation Coolant tank capacity: 200 l Chip conveyor capacity: 160 l

Condition: ready for operation (used), Functionality: fully functional, turning length: 3,000 mm, turning diameter over cross slide: 600 mm, spindle speed (max.): 600 rpm, swing diameter over bed slide: 1,200 mm, center height: 600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing diameter over cross slide: 600 mm Turning length: 3,000 mm Swing diameter over bed slide: 1,200 mm Center height: 600 mm Spindle speed: 20 – 600 rpm Faceplate diameter: approx. 1,500 mm Control system manufacturer: FAGOR Gbelhccswvi Txjqqep MACHINE DETAILS Overall height: 2,500 mm Overall length: 6,000 mm Overall width: 2,500 mm Total weight: 10,000 kg EQUIPMENT - General overhaul by KLAAßEN in 1999 - Faceplate (included): Ø 1,200 mm - With tailstock and boring bar holder

Condition: not inspected (used), Year of construction: 1980, Functionality: unexamined, machine/vehicle number: C20018, spindle bore: 53 mm, turning diameter: 460 mm, turning diameter over bed slide: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine on time between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Spindle bore: 53 mm Swing diameter: 460 mm Gbjlhccjwvi Troqqjp Swing diameter over cross slide: 240 mm Turning length: 1,000 mm Spindle speed: 32 – 2,000 rpm MACHINE DETAILS Overall length: 2,200 mm Overall width: 1,000 mm Overall height: 1,300 mm EQUIPMENT - Tailstock - Four-jaw chuck, diameter: 200 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 4,050 h, Functionality: fully functional, machine/vehicle number: STASV1220319EGCAH, turning diameter over cross slide: 508 mm, turning length: 527 mm, turning diameter: 336 mm, travel distance X-axis: 290 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, bar diameter: 78 mm, operating hours of spindle: 1,040 h, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Turning diameter over cross slide: 508 mm Turning length: 527 mm Turning diameter: 336 mm Distance between centers: 824 mm Chuck diameter: 203 mm Spindle Sub spindle: present Max. main spindle speed: 3,500 rpm Max. sub spindle speed: 6,000 rpm Max. bar capacity main spindle: 78 mm Max. bar capacity sub spindle: 46 mm Turret Number of tool stations: 12 Max. driven tool speed: 4,000 rpm Turret disk: VDI40 (DIN1809) Tool holder: 40 mm Y-axis: fully integrated Linear roller guideways: on X, Y, Z, and W axes Shank cross-section: 25 mm Indexing time: 0.15 s Travels X-axis travel: 290 mm Y-axis travel: ±55 mm Z-axis travel: 560 mm W-axis travel: 640 mm Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse W-axis: 30 m/min Positioning accuracy VDI/DGQ 3441: 0.010 mm Repeatability: 0.005 mm MACHINE DETAILS Overall height: 2,700 mm Overall length: 4,500 mm Overall width: 2,700 mm Total weight: 8,500 kg Control: digital technical documentation integrated Power-on hours machine: 4,050 h Power-on hours main spindle: 1,040 h Power-on hours driven spindle: 380 h Power-on hours sub spindle: 138 h Transport: suitable for standard truck Voltage: 400 V, 50 Hz Connected load: 55 kVA Ambient temperature: 35°C EQUIPMENT - Documentation/manual Gbslhcewvi Suscqqsp - includes tool package

Condition: not inspected (used), Year of construction: 1977, Functionality: unexamined, machine/vehicle number: 218758, spindle bore: 53 mm, turning diameter: 520 mm, turning diameter over bed slide: 320 mm, turning length: 1,500 mm, spindle speed (max.): 2,800 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle bore: 53 mm Turning diameter: 520 mm Swing over bed slide: 320 mm Turning length: 1,500 mm Spindle speed: 31 - 2,800 rpm MACHINE DETAILS Overall length: 4,000 mm Gelhcowvi Rdscqqsbp Overall width: 1,500 mm Overall height: 1,800 mm Total weight: 1,500 kg EQUIPMENT - Tailstock - Multifix tool holder

Condition: not inspected (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: S6AT2502, travel distance X-axis: 250 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 5,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 250 mm Travel Y-axis: mm Travel Z-axis: 600 mm Max. spindle speed: 5,000 rpm Feed force Y-axis: 7,000 N Rapid traverse: 12 m/min Gelhcowvi Euecqqebp DRIVE & PERFORMANCE Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB SPINDLE Chuck diameter: max. 200 mm Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Total height: 2,100 mm Total length: 5,000 mm Total width: 2,000 mm Total weight: 8,000 kg Tool holder: 30 mm Control manufacturer: SIEMENS Control model: SINUMERIK 840D Number of tool magazine positions: 12 EQUIPMENT Continuously variable spindle speed Chip conveyor With Y-axis and sub spindle Tool turret with 12 stations, all driven Tool holder: VDI 30 Includes 3-jaw chuck (RÖHM, Ø 250 mm)

Condition: not inspected (used), Year of construction: 2001, Functionality: unexamined, machine/vehicle number: 177055267, travel distance X-axis: 400 mm, travel distance Z-axis: 280 mm, workpiece diameter (max.): 400 mm, clamping diameter: 210 mm, workpiece length (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to timely collection by 31/07! TECHNICAL DETAILS Capacities Max. clamping diameter: 210 mm Max. workpiece diameter: 400 mm Max. workpiece length: 120 mm Travel distances X-axis travel: 400 mm Z-axis travel: 280 mm Control Control unit: Siemens Sinumerik 840 D Tool turret: 8-position MACHINE DETAILS Footprint Length: 7,500 mm Width: 4,000 mm Height: 3,500 mm Weight: 12,000 kg EQUIPMENT Gbjlhowyi Iksccqqop - Parts conveyor belt with Siemens PLC control - Part measuring system for inside diameter measurement of gear rims Note: Transport will be carried out by truck with max. width of 3,000 mm