Used Switch-Disconnectors for sale (6,159)

Condition: used, Horlemann HR10U-S switchgear, 12 kV HR 10U, the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit strength: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Cedpfxjnfu Dyj Agrjhd Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC cast resin transformer: Design: Cast resin High-voltage side: 10 kV Low-voltage side: 400-230 V Circuit: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The pressure relief of the switchgear is carried out via a pressure relief chamber in the lower part of the switchgear bay. Documents: Test report Wiring diagram You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), safety switch, safety switch, protective grille switch -Manufacturer: Euchner, Safety Switch from vertical lathe Scherer VDZ 80 DS Chjdpfx Aevun Adjgrod -Type: TZ1LEO24SR11 .: 070828 -Technical data: see photo type plate -Dimensions: 175/110/55 mm -Weight: 1.7 kg

Condition: used, Safety controller, safety switch, safety sensor, overload trip power sensor Csdpfx Agot Trw Eorshd -Safety sensor: Overload trip power sensor -Type: BEV-1013 -Quantity: 1x available -Dimensions: 180/145/H95mm -Weight:1.6 kg

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches Chsdpfstxkqvox Agrsd -Manufacturer: Moeller, motor protection switch -Type: PKZMO 1-06 -Number: 5x switches available -Price per piece -Dimensions: 85/55/H80 mm -Weight: 0.2 kg/piece

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier Chjdpfx Agjya Iaqerjd - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Electric chain hoist, KITO Type WLL 240 Manulift Manufacturer: KITO Yamanashi, Japan Code No. EDC 24SD Serial No. Year of manufacture: 2017 Chsdpj Ah Ikrofx Agrjd Load capacity: 240 kg Hook travel: 2 meters Distance from suspension to load hook: 850 mm Lifting speed: 3 to 12.9 m/min Power connection: 230 volts, 50 Hz - Cylinder handle control with potentiometer for speed adjustment - Safety limit switches - Emergency stop Weight: 18 kg Very good condition

Condition: used, ZOCCA RU 2000/3 UNIVERSAL CYLINDRICAL GRINDING MACHINE • Manufacturer: Zocca (Como, Italy) Chjdpfx Age Ah H D Njred • Model: RU 2000/3 (External / Hydraulic Universal Grinder) • Center Height: 180 mm • Maximum Grinding Diameter: 360 mm • Distance Between Centers: 2,000 mm • Drop down Internal Spindle • Steady rests • Coolant system • Spare wheels • Safety foot switch • Machine manual

Condition: used, YUDO SIT500 Sequence Injection Timer 1\. Overview & Application 1. Manufacturer: YUDO (South Korea) 2. Model: SIT500 Sequence Injection Timer 3. Manual Version: VER. 4.3 MN SIT500 English 4. Application: Used in injection molding to control the opening and closing timing of hydraulic or pneumatic valve gates on hot runner systems. It helps eliminate weld lines, prevent flashing, and improve part cosmetics and strength. 2\. Technical Specifications 1. Channels/Zones: 2-Zone modular configuration (equipped with Module 1 and Module 2). 2. Power Supply: AC 210–230 V (50/60 Hz). 3. Solenoid Valve Output Voltage: Configurable DC 24V / AC 110V / AC 220V (labeled and set for DC 24V output on this unit). 4. Timer Adjustment Range: 0 to 999 seconds per phase. 5. Interface: Heavy-duty industrial Harting multi-pin connector. 6. Control Modes: Supports MODE A and MODE B timing logic sequences (visual guide on the front panel). 3\. Control Panel Interface Chjdo Ah Dz Tspfx Agred 1. DEL / DEL SET: Delay time setting before the valve gate opens. 2. OPEN / OPEN SET: Open duration setting for the valve gate. 3. Signal / Open LEDs: Status indicators for incoming injection signal and active solenoid output. 4. Power Switches: Dedicated toggle switch at the bottom of each module for individual channel control.

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l - Handle material: pre-spooled handle tape rolls - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard Chedpfx Agj Ahzarjrjd - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Chsdpfx Ao Ah E Dfegrod A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) Chodpfxe Ahy Tzs Agrod - Swiveling range 90° (0° ~ 90°) Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Codpshmmfkofx Agrehd Weight 8.5 tons Good condition

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 27878-01, type of input current: three-phase, input frequency: 50 Hz, input current: 2,900 A, ABB Limited low-voltage main switchgear / main distribution switchboard Year of manufacture: 2012 Type: Low-Voltage Main Switchgear / Main Distribution Switchboard Codszz I T Ejpfx Agrshd Nameplate data: Supply: 415 V AC, 3-phase, 4-wire, 50 Hz Auxiliary circuit voltage: 240 V AC Main busbar rating: 2900 A Main busbar fault level: 50 kA for 1 second (nameplate). The site equipment card also states 55 kA for 1 second. Degree of protection: IP31 Conformity: BS EN 60439-1, BS EN 60947-1, 73/23/EEC, CE Main breakers: ABB SACE E2 air circuit breakers (ACB) Interconnection ACB to Section C busbars Withdrawable PDU outgoing modules Metering / instrumentation cubicles with digital meters Associated with Transformer 1C / PDU distribution. Some compartments are marked Danger 11 000 V (HV / transformer cable side). Manufacturer: ABB Limited, Hanover Place, Sunderland, England, SR4 6BY. Condition: used, installed in a plant room. Price on request. Nameplate and cubicle photos available.

Condition: not inspected (used), Only sold as a set. We are interested in buying everything at once. Additional photos are available upon request. The price is negotiable. Chjdpfx Agozrv Avsred For more machines, parts, and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: good (used), Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos can be provided upon request. The price is negotiable. Chsdszuxtcjpfx Agred For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter Codopy Eygepfx Agrohd The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d Chjdpfswxvadox Agrjd fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: used, CTS T-50/3800/I – Temperature/Battery Test Chamber Temperature range: -50 to +100 °C | 3,750 liters | water-cooled Nitrogen inertization with O2/CO monitoring and safety door locking Used temperature test chamber from CTS – Clima Temperatur Systeme GmbH. According to the previous owner, it was used for HV battery testing; suitable for temperature and material testing, environmental simulation, and quality assurance. TECHNICAL DATA Type: T-50/3800/I Temperature range: -50 to +100 °C Temperature deviation over time/space: up to ±0.5 K each Heating: approx. 4 K/min (-40 to +80 °C) Cooling: approx. 3 K/min (+85 to -40 °C) Change rates according to the manufacturer, without test specimen, measured in the supply air. REFRIGERANT Pre-cooling: R507, 6.5 kg Cooling: R23, nameplate rating 15 bar / 5 kg Both circuits: max. permissible overpressure 25 bar, test pressure 27.5 bar ELECTRICAL 400 V / 3/N / 50 Hz; rated power 20.4 kW; rated current 36.3 A On-site protection: 50 A slow-blow; protection class IP54 DIMENSIONS AND WEIGHT Test volume: 3,750 liters Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm according to the previous owner Installation drawing: dimensions in plan view 2,840 mm; system height approx. 2,450 mm. Complete external dimensions to be confirmed. Test chamber approx. 2,700 kg; control cabinet approx. 200 kg; total approx. 2,900 kg without test specimen/additional equipment. EQUIPMENT Digital temperature control with 32-bit controller, LCD setpoint/actual value display, manual and program operation, stainless steel test chamber (1.4301), stainless steel heating element, radial fan, lockable double-leaf door, water-cooled refrigeration unit, separate control cabinet. Test chamber floor load: 500 kg. SAFETY AND CONNECTIONS Nitrogen inertization, O2 residual content and CO monitoring, Dräger-Polytron sensors according to the previous owner, ATEX-tested flame arrestors according to manufacturer’s documents, electromagnetic door locking, mechanical emergency opening, safety temperature limiter, overpressure switch in the refrigeration circuit, fan motor current monitoring. RS232; potential-free fault report contact. HV connections and cooling water connections for test specimens according to the previous owner. Max. heat radiation: 5,000 W at -40 °C. Cooling water: R 1 inch, approx. 2.5 m³/h at ΔT 10 K and full load. Nitrogen: R 3/4 inch, operating pressure 3–6 bar. Condensate drain: R 1 inch internal thread. Sound pressure level: below 70 dB(A) according to the manufacturer. NOTE ON BATTERY TESTING HV battery application and designation of the safety equipment as “Hazard Level 6” according to the previous owner; classification not independently confirmed. CONDITION AND SCOPE OF DELIVERY Cedpfx Ao Ah Si Hogrehd Used; optical condition according to the pictures. 1 × CTS T-50/3800/I, separate control cabinet and accessories according to the pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2014, functionality: fully functional, 4-AXIS CNC TURNING CENTER • Color: Light gray/anthracite RAL7035, 7016 • Main spindle 26 kW • Counter spindle AS 11 kW • Bar diameter 65 mm • Control system Fanuc 31i B-5 • Counter spindle can be lowered • 2 Y-axes *50/-40 mm, 4-way guided • X-axes with flat guide • 2 turrets with 12 tool stations each • 24 powered tool stations. Torque 47 Nm. • 2 C-axes • Bar loader interface • Controlled parts catcher, can be used for main and counter spindles • Finished parts conveyor belt, installed lengthwise, 500 mm long • Hinged belt chip conveyor with discharge height of 820 mm • 2 coolant pumps at 7 bar including filter • Foot switch for chuck operation on the main spindle • Internal flushing system with 4-bar pump • Flushing gun, 4 bar, for cleaning the work area • Intelligent handwheel Program execution with simultaneous movement of all axes MACHINE EQUIPMENT - Conveyor belt for machined parts Belt width/length 300x800 mm, Discharge on the operator side - Measuring probe, swiveling, with 2 heads for tool measurement Turret, top and bottom - High-pressure coolant pump, 18 bar for 2 turrets incl. coolant filter Pump capacity 20 l/min - MANUAL GUIDE i, dialog programming Turning/milling cycle, 3D simulation Manual (on CD) - SBS tool breakage and wear monitoring - Programmable axis mirroring Bar loader magazine Bar loader magazine FMB turbo 5-55 Bar length max. 3200 mm Oil lubrication for the bar Bars 5-55 / turned down to 50 mm Chodpfx Aj Ah Scnegrod Loading level 250 mm Guided by roller guide, can be changed to guide chuck (polygonal) Precise positioning during insertion Interval mode for polygonal material Residual piece ejection to the rear (max. 530 mm)

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Chsdpezlivpsfx Agrod Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: excellent (used), Drawbar head, control unit, operating lever, joystick, drive switch, single-axle joystick -Manufacturer: Gessmann, Single-axis joystick Codpfx Agoy Auirjrjhd -Type: S 14 -Number: 19 joysticks available -Price: per piece -Dimensions: 70/50/H145 mm -Weight: 0.2 kg/pc.

Condition: excellent (used), Year of construction: 2001, Krones stand control desk with B&R IPC 2001 type CTS10, Siemens power supply and S7 ET 200L verdrate on terminals. Codpfx Ajpbwfiogrehd

Condition: new, Year of construction: 2024, power: 1.2 kW (1.63 HP), SCHORR HIGH LIFT TRUCK ELECTRIC PRO 1500KG LOAD CAPACITY 4.5M LIFTING HEIGHT RR15HH450E FREE LIFT Powerful professional tool with a load capacity of up to 1500 kg -- Reaches a lifting height of 4.5m -- Free lift: mast only extends from the height of the mast - ideal for low ceiling heights -- Robust triplex mast & solid chassis -- Charger included in the scope of delivery -- Includes powerful 24V 200Ah lead batteries -- Digital energy level indicator & hour meter -- Small turning radius of only 1575mm - ideal for narrow working areas EQUIPMENT / FEATURES Robust and high-quality design Thanks to its robust and stable design, the pallet truck guarantees a high level of stability and durability. With a load capacity of 1500 kg, this high lift pallet truck is a real powerhouse and offers the necessary strength to lift heavy loads effortlessly up to 4.5 m. Free lift function: With its free lift, the high lift pallet truck is also particularly suitable for warehouses and rooms with low ceiling & clearance heights. The triplex mast only extends from the height of the mast (1570 mm) and therefore enables safe and effective working in confined spaces. A real all-rounder in combination with the lifting height of 4.5m. Chjdpjqwdlpjfx Agred Integrated charger: The built-in 24V lead battery with a capacity of 200Ah ensures a long service life. To charge the electric pallet truck, you can simply connect it to a conventional 230V socket using the charger included in the scope of delivery. Easy handling: The pallet truck is easy to operate and has a high-quality control unit, which is waterproof and can therefore be used in damp or cool rooms for short periods. In addition, the control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. Thanks to its small turning radius of just 1575 mm, the electric pallet truck is particularly maneuverable and flexible to use. Various drive programs: Thanks to the various travel programs, the SCHORR high lift pallet truck is extremely flexible and adapts perfectly to the needs of its users. In addition to the normal transport speed of approx. 5.8 km/h, it also has a "creep mode". This mode enables slow and precise movement in order to maneuver even in the narrowest aisles and shelves. Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR15HHE free lift Load capacity: 1.5t Model: 450E Tare weight incl. batteries: 1125kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1975mm Overall width: 820mm Length including fork crown: 905mm Stroke: 4500mm Free lift: 1570mm Height of mast retracted: 2054mm Height mast extended: 5030mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outer spacing: 570mm Aisle width with pallet: 800x1200 lengthwise 2450mm Turning radius: 1575mm Speed Travel speed with/without load: 5.8km/h / 6.0km/h Lifting speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. Gradeability with/without load: 6% / 15% Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you!

Condition: new, Year of construction: 2024, SCHORR electric high lift pallet truck 1500kg load capacity - Different lifting height variants are available (2500mm, 3000mm & 3500mm) - Low-maintenance and smooth-running - Including 24V batteries and charging station - 1.5t load capacity - NEW & in stock! Prices depending on lifting height / variant: - 2500mm lifting height: 3613€ - 3000mm lifting height: 3781€ - 3500mm lifting height: 3949€ SCHORR ELECTRIC PALLET TRUCK 1500KG WITH A LIFTING HEIGHT OF 2500 TO 3500MM The SCHORR electric pallet truck offers you the option of transporting heavy loads of up to 1500kg. It reaches a lifting height of 2500 to 3500mm (depending on the version selected). The forks have a length of 1150mm and are therefore ideal for one-way pallets and Euro pallets. The big advantage is that it fits through a standard door with its retracted mast height of only 1745mm (2500mm version). The model is characterized in particular by its robust design and has an integrated steel protective grid. Charging is extremely easy thanks to the integrated charger. You can connect the pallet truck directly to a conventional 230V socket and charge it. The pallet truck has a high-quality CURTIS control system. The control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. The SCHORR high lift pallet truck also has various drive programs, e.g. the slow-moving crawling mode (Turtle). Chodpfx Agsttgg Aorsd POWERFUL IN EVERY RESPECT With a load capacity of up to 1.5 tons, the RR15HH electric pallet truck can easily cope with most warehouse requirements. The robust steel frame not only provides protection against impacts, but also offers excellent maneuverability thanks to its flat design. INTEGRATED CHARGER The pallet truck is equipped with two maintenance-free 12V lead-gel batteries with 100 Ah and an integrated charger. You can simply connect the device to a conventional 230 V socket and charge it. INTUITIVE CONTROL The control unit, which can be operated with both hands, is very easy to use. The use of market-proven components guarantees a high level of ergonomics and user-friendliness. The travel speed is infinitely variable and the selectable creep speed means that even delicate goods are no longer a problem. Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR15HHE Load capacity: 1.5t Model: 250E // 300E // 350E Tare weight incl. batteries: 483kg // 495kg // 507kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1740mm Overall width: 795mm Length including fork crown: 590mm Stroke: 2500mm // 3000mm // 3500mm Height of mast retracted: 1745mm // 1995mm // 2245mm Height of mast extended: 2924mm // 3424mm // 3924mm Fork dimensions DIN ISO 2331: 60mm x 160mm x 1150mm Fork outer spacing: 570mm Aisle width with pallet: 800x1200 lengthwise 2040mm Turning radius: 1342mm Handling speed Travel speed with/without load: 4.0km/h / 4.2km/h Lifting speed with/without load: 0.09m/s / 0.14m/s Lowering speed with/without load: 0.11m/s / 0.1m/s Max. Gradeability with/without load: 6% / 8% We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or e-mail. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2014, functionality: fully functional, -KOM 3091- Offered here are Leuze photoelectric sensors. The photoelectric sensors are in good condition. They were previously used in a set of two as safety sensors. A total of six Leuze photoelectric sensors of this type are available. Codpfxowl U Sxe Agrshd