Used Storage Bins for sale (9,522)

Condition: used, tank capacity: 70,800 l, GENERAL Design: horizontal Remarks: Manhole approximately 350 x 450 mm on the front bottom; one tank (9540-1) with a small dent under the bearing shell, one tank (9540-2) without a nameplate; up to 4 additional identical tanks can be made available upon request. The following saddle supports can be purchased separately for the tank: Total width: 3,000 mm Hfjdpfx Ageyckn Nsfef Total height: 3,000 mm Total length: 10,500 mm Location: external storage Nameplate: Volume: 70,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: water TANK Ends: Torispherical heads Base type: Saddles EQUIPMENT Outlet: available

Condition: used, tank capacity: 100,000 l, GENERAL INFORMATION Features: Ventilation / Deaeration Design: Vertical Remarks: Sloped conical bottom for drainage towards outlet (installation requires concrete foundation on site); total height estimated according to drawing (minor deviations possible); Cylinder wall thickness: 4/3/2.5 mm Internal diameter: 3,350 mm Total height: 12,500 mm Agitator: Agitator flange Location: Outdoor storage Technical documentation: Drawing Hodpfxsyci Nls Agfeff Nameplate: Volume: 100,000 litres Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Cylindrical height: 11,500 mm Previous application: Caustic/Acid/Neutralisation tank (wash water) TANK Bottom: Flat bottom with slope EQUIPMENT Manhole / Dome: In cylinder (approx. 350 x 450 mm) Outlet: 100 mm Note: Slight residues/adhesions AGITATOR Agitator arrangement: Mounted laterally on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Top wall thickness: 3 mm

Condition: used, tank capacity: 44,480 l, GENERAL Equipment: Lifting lugs Design: Vertical Remarks: Double-chamber storage tank divided into two 22,240 litre tanks; total height according to drawing, cylindrical height for each 22,240 litre tank according to drawing Internal diameter: 3,200 mm Total height: 7,380 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: Drawings, various documents Nameplate: Vacuum: 0.25 bar Volume: 44,480 litres Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,930 mm TANK Max. permissible operating temperature: 100°C Ends: Dished heads Support type: Legs Number of legs: 4 pcs EQUIPMENT Hfodpfx Aeyci Unsgfjf Manhole / Access port: in the top head (DN 600) Outlet: Flange DN100 TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: used, tank capacity: 67,000 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Total height according to drawing (slight deviations possible); manhole cylinder NW 600 Internal diameter: 3,000 mm Total height: 11,100 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: drawing, inspection certificate Nameplate: Volume: 67,000 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 8,870 mm Last application: Solvents VESSEL Hfodpfoyckf Iex Agfjf Max. allowable operating temperature: 100 °C Base type: legs Number of legs: 4 pcs EQUIPMENT Manhole / dome: in cylinder, in top head (DN 600) Outlet: 100 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 9 mm Top wall thickness: 6 mm

Condition: used, Year of construction: 2017, tank capacity: 30,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Hfodpfx Ageyci E Hefjf Year of manufacture: 2017 External diameter: 3,850 mm Overall height: 4,600 mm Location: Outdoor storage Nameplate: Volume: 30,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 2,600 mm TANK Bottom: Conical bottom Support type: Height-adjustable feet Number of feet: 4 pcs EQUIPMENT Manhole / Dome: in top head (DN 500) Outlet: available Outlet: 50 mm

Condition: used, tank capacity: 5,200 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Remarks: Agitator element and shaft are present, drive unit is missing Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 5,120 mm Insulation: present Hfjdpfx Agjxqdagefsf Agitator: Propeller Support type: feet Location: external storage Volume: 5,200 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,430 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation material: rock wool Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: on upper head (DN 400) Outlet: DN50 DIN 11851

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: vertical Comments: Manhole diameter: approx. 420 x 320 mm Inner diameter: 820 mm Total height: 2,350 mm Base type: feet Location: Outdoor warehouse Technical documentation: Drawing Volume: 1,000 liters Hfedpfxex Dlvvj Agfjf Product-contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,832 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled

Condition: used, tank capacity: 1,050 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: standing Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 1,000 mm Total height: 1,810 mm Heating/Cooling: available Max. allowable operating overpressure: 6.0 bar Support type: feet Hodpfx Agex Dmbmefeff Location: external storage Technical documentation: drawing Cylinder temperature control: Thermoplate Volume: 1,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL PROPERTIES External surface: marbled

Condition: used, tank capacity: 2,100 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: upright Hfsdsx Dmbtspfx Agfsf Notes: Manhole diameter: approx. 420 x 320 mm Internal diameter: 1,200 mm Total height: 2,355 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Support type: feet Location: external storage Technical documentation: drawing Cylinder temperature control: Thermoplate Volume: 2,100 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs FEATURES Manhole / dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: upright Remarks: Manhole diameter (cylinder): approx. 420 x 320 mm; 2 thermoplates in the cylinder area Internal diameter: 1,800 mm Hfsdpfxex Dmb Ts Agfof Total height: 3,925 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Support design: feet Location: external storage Technical documentation: drawing Cylinder temperature control: thermoplate Volume: 8,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 2,976 mm TANK Number of feet: 3 FEATURES Manhole / dome: in the cylinder, in the top (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled

Condition: used, tank capacity: 1,550 l, GENERAL Features: Level indicator (without guarantee), crane lugs Design: vertical Notes: Manhole diameter: approx. 420 x 320 mm Internal diameter: 1,200 mm Total height: 1,870 mm Heating/Cooling: available Max. permitted operating overpressure: 6.0 bar Base design: feet Location: external storage Technical documentation: drawing Cylinder temperature control: thermoplate Volume: 1,550 liters Product contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs Hfedpjx Dmcdofx Agfsf EQUIPMENT Manhole / dome: in cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled

Condition: used, tank capacity: 28,100 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Tank has dents in the shell (vacuum damage; see photos); manhole diameter in the shell approx. 600 mm; feet ends cut off; 3 dip pipes inside the tank; specified total height includes connection of ring line at top head; outlet with flanged reducing fitting Internal diameter: 2,600 mm Total height: 7,700 mm Max. overpressure: 1.0 bar Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Nameplate: Volume: 28,100 liters Shell wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 4,594 mm Last application: chemical industry Hfedpfxsyckcyj Agfof TANK Max. allowable operating temperature: 100 °C Mounting type: legs Number of legs: 4 units EQUIPMENT Manhole / dome: in shell, in top head (DN 600) Outlet: flange DN100 Note: slight residues MATERIAL COMPOSITION Material of legs: steel TECHNICAL DATA / WEIGHTS Bottom wall thickness: 8 mm Top head wall thickness: 5 mm

Condition: used, tank capacity: 29,000 l, 29,000-liter refrigerated storage tank made of stainless steel (V2A) Hodpjyfwnhjfx Agfeff

Condition: used, tank capacity: 5,400 l, GENERAL Equipment: Venting/breathing, level indicator (no guarantee), ball valve, crane lugs Design: vertical Remarks: Manway (340 x 440mm) present in front bottom; Total width: 1,600 mm Total height: 2,530 mm Total length: 1,900 mm Support type: adjustable-height feet Location: Bremen Volume: 5,400 liters Product contact material: V4A 1.4401/04 (AISI316) Hodpfxsxqdnwo Agfjff Condition: used Last application: winery TANK Number of feet: 4 units FEATURES Manway / dome: service handhole Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL Features: Ball valve Design: Vertical Remarks: Manway diameter: approx. 395 mm Internal diameter: 950 mm Total width: 1,120 mm Total height: 2,200 mm Location: Bremen Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 1,580 mm Hfedpfxjyck Rws Agfof Last intended use: Paints & coatings TANK Standing form: Standing ring EQUIPMENT Manway / Access hatch: in the top head Outlet: 50 mm Note: light residues

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity per storage section: 360 kg, electrical fuse: 17 A, total width: 2,780 mm, total height: 9,950 mm, total length: 3,074 mm, shelf length: 2,450 mm, The company has 4 automatic storage units for sale: - Three Kardex SHUTTLE-XP-500 units, in very good condition, serviced - One Kardex SHUTTLE-XP-500 unit, damaged (lift drive fault) Manufacturer: Kardex Model: SHUTTLE-XP-500 Hfsdpfoyzqm Dsx Agfsf Year of manufacture: per unit – 2008 If you have any questions or require further information or photos, please contact us by message or phone.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Hfodpfx Aehfxkaogfef Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: new, Unused bin washer. Bought for a contract which never materialised. Hfodpstpv T Njfx Agfjf

Condition: excellent (used), Wine tanks and for other liquid: - 2080 lit - 3110 lit - 4290 lit - 5150 lit - 7520 lit - 9390 lit - 10650 lit - 11750 lit - 12520 lit - 18020 lit Hodpfxotzz H Sj Agfoff

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 13,500 kg, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, load per truss pair (max.): 4,500 kg, number of shelf rows: 3, frame height: 4,500 mm, pallet spaces: 117 euro pallets, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received Hsdpfx Agoyy Unijfjff - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: good (used), functionality: fully functional, overall weight: 2 kg, inner dimension width: 640 mm, inner dimension length: 440 mm, inner dimension height: 170 mm, total width: 496 mm, total height: 190 mm, total length: 700 mm, tank capacity: 47 l, For sale: Broban bread crates. Available in batches of 10,000. Or upon request. €3.50 EXW per Broban crate. Transport negotiable. Stackable and nestable bread crate – Broban crate – color: brown (700 x 496 x H 190 mm – 47 liters). Equipped with a galvanized stacking bracket and stacking lugs for multi-level stacking. Suitable for transport and display of all types of bread. Supplied with a perforated base and side walls. Food-safe. It is possible to inspect the crates on site. Hfjdpfx Agoxta Avofef If you have any questions or comments, please feel free to contact us. Kind regards, Leo Holland

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. Hfsdsyw Ivhjpfx Agfef + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Hjdpfxev Ukz Ao Agfjff Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, total length: 17,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 2, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racks (4 x M35112711-3) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Hfodpfx Aov Ungcsgfjf Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 17,100 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 3, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 5,700 mm, 3 double-bay pallet racks (M35112711-3) Hedev Urpzspfx Agfsff Each: 5.7 m length, 3.5 m height, 1.1 m depth Each: 2 bays, 2.7 m wide Each: 3 beam levels, compartment load 3000 kg - 9 frames (RM3511 - RAL5019) - 18 foot plates, shims, fastening material - 36 floor anchors (ZZBA1210) - 36 single beams (T2711 - RAL2008) - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - up to 20 working days after receipt of payment - free delivery to construction/installation site - unloading from the truck by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (excluding islands!). Deliveries to EU countries arranged individually.