Used Steam for sale (810)

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean Rjdpfx Aaexzh E Uofjn The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. Rjdpfxjxv Aaie Aafjn ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Year of construction: 2014, condition: used, This listing is for a Mueller PyroPure P4003 Pure Steam Condensing System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's- Redpfxoxv Agce Aafjn Product Overview: The Mueller P4003 is a high-capacity pure steam condensing system, part of the trusted PyroPure series. Designed for pharmaceutical manufacturing, this system produces pyrogen-free and endotoxin-free water-for-injection (WFI) by condensing pure steam. Built to meet or exceed U.S. Pharmacopoeia (USP) standards for WFI, as well as CE marked and FDA compliant with 3.1B material certification. It is a versatile solution for facilities requiring both pure steam and WFI quality distillate. Its robust design and advanced features ensure reliable operation, compliance, and minimal maintenance. Key Specifications: Model Number: P4003 Capacity: 100 gallons per hour or 379 litres per hour of WFI-quality distillate. Pure Steam Inlet: 807 pounds per hour or 366 kilograms per hour. Coolant Requirement: 978 gallons per hour or 3702 litres per hour. Pure Steam Output Compliance: Pyrogen-free and endotoxin-free, meeting USP WFI standards. Core Features High-Quality Output: Produces pyrogen-free steam and WFI-quality distillate, ideal for pharmaceutical-grade applications. Utilizes a tangential nozzle design for optimal impurity separation in the pure steam generator. Efficient Design: Fully drainable components eliminate contamination risks and ensure clean operation. Electro-polished 316/316L stainless steel with a maximum surface roughness of 20 Ra for all product contact areas. USP Class VI-certified elastomers for enhanced safety and regulatory compliance. Ease of Maintenance: Removable tube bundle in the condenser allows for easy cleaning and inspection of critical surfaces. Requires only 24 inches of clearance on all sides for service and maintenance. Minimal instrumentation with just one control loop simplifies operation and reduces potential downtime. Installation Flexibility: Can be integrated with a PyroPure pure steam generator for dual production of pure steam and WFI. Optional stand-alone design for remote installation at the point of use, adding versatility to your setup. Applications: Pharmaceutical Manufacturing: Sterile environments, autoclave processes, and critical cleaning procedures. Biotechnology: Providing WFI for sensitive biological processes. Healthcare: Humidification and sterilization in clean rooms or hospital sterilization units.

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- Redjxqqyyopfx Aafen System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser ⦁ Degasser The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Rjdpoxv Af Sofx Aafon Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Specifications Performance: Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...

Condition: used, tank capacity: 8,550 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Feet made of Fe; Flanges partially made of Fe Speed: 8.5 - 51 rpm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 5,200 mm Heating/Cooling: present Power: 15 kW Max. allowable operating temperature: 200°C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,550 liters Double jacket volume: 160.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,200 mm Last application: Pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200°C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: In top head (DN 500) Outlet: Flange DN150 MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 380 Volt Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 8 mm Agitator arrangement: Centered in the top head Redpfx Aoxqah Tjafen Agitator equipment: Drive was controlled by an external speed controller by the previous owner (no longer present) Top head wall thickness: 10 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Rodex A Dplspfx Aafjn Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: used, Year of construction: 2012, functionality: limited functionality, power: 45 kW (61.18 HP), Steam turbine Manufacturer: Siemens Type: AFA 2.5 Year of construction: 2012 Fresh steam pressure: 4.10 bar Fresh steam temperature: 153°C Fresh steam quantity: t/h Wheel chamber pressure: bar Wheel chamber temperature: °C Exhaust pressure: 0.90 bar Exhaust temperature: 140°C Electrical power: 45 kW Rated speed: 3,000 rpm Quick stop speed: 3,600 rpm Rodpfxsx H Rwys Aafen Steam turbine with generator and vacuum condenser with pumps, without inspection, as is, without overhaul at current location. bps Consulting GmbH CONSULTING | PLANNING | SERVICE Steam turbines | Power plant systems and components info(at)bps-energie.de

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit 4x8 kw heating wire 32kW Redpfxjfl Iquo Aafjn 160 ° C max

Condition: like new (used), Rational Icombi pro XS unit after inspection, in very good condition. Power supply 400V, year of manufacture 2022. Rsdjx Ht Syjpfx Aafsn

Condition: excellent (used), Year of construction: 2005, Year of construction: 2005 Belt width: 700 mm Belt length: 12500 mm Max. product height: 180 mm Heating: steam Rodpfx Ajxzdu Esafen Cooking time: 3 - 18 min. Power: 3 x 400V, 50Hz, 26kW Dimensions: 14600 x 2400 x 4400 mm Weight: 9500 kg Including continuous belt washer Siemens Simatic S7 control panel

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: D5894, Grupa Azoty Zakłady Chemiczne "Police" S.A. in Police invites you to submit an offer for the sale of a fixed asset: Steam Turbine C-32154. Rjdox Eyviopfx Aafon The Steam Turbine C-32154 was manufactured by DRESSER-RAND Wellsville, NY 14895 USA and was intended for driving a carbon dioxide compressor in the urea production process. It was delivered in September 2007. The turbine has never been used or installed in the plant. In December 2011, an inspection was carried out by Dresser-Rand service. In 2018, the turbine rotor underwent an overhaul at the Dresser-Rand Le Havre Repair Center workshop. The book value of the turbine at the time of purchase was PLN 8,783,457.93. We invite individual purchase offers.

Condition: good (used), Used for steaming pasta and other food products. Excellent condition, available immediately. Redpfsxxd Imox Aafjn

Condition: good (used), Year of construction: 2001, pressure: 10 bar, 1 x steam boiler Loos, year of fabrication 2001 .... output: 10 to / h - security valve 10 bar burner: Weishaupt type G70/1B, NR, yoc: 2004 fuel: gas, with flue gas heat exchanger Loos The steam boiler is ready for using and ready for transport, checked. Please contact us for additional information and dimensions. Rsdpfx Aaogpw Izjfjn

Condition: good (used), Year of construction: 2009, pressure: 24 bar, steam boiler 20.000 kg x 24 bar Rsdsr Ezblspfx Aafsn used type: Loos year of construction: 2009 capacity: 20.000 kg / h max. working pressure: 24 bar with Saacke burner for natural gas with Economizer with feed water tank available immediately - additional equipment like chimney on demand

Condition: new, Year of construction: 2025, steam boiler 16.000 kg x 26 bar steam boiler 12.000 kg x 16 or 26 bar new type: VKK Standard equipped and fixed by Hagelschuer with or without Economizer 3 pass boiler production according DIN 12953 Redpfspky Dxex Aafsn available immediately - additional equipment like the burner and other sizes or capacities available

Condition: new, Year of construction: 2025, pressure: 16 bar, steam boiler 6.000 kg x 16 bar new type: Viessmann M75C capacity: 6.000 kg / h max. working pressure: 16 bar with burner connection plate for Weishaupt burner Redpfx Aaer Ny R Ajfjn with Economizer produtcion according DIN 12953 available immediately - additional equipment and other sizes or capacities available

Condition: used, Steam-heated clean steam generator with condensate cooler for feedwater preheating and fresh water injection via a control valve. Ready-to-connect clean steam generator, installed on a base frame, including all piping, compressed air lines, control cabinet, and cabling. Year of construction: 2019. Rsdpfx Aewgkyhoafen Design data: Power: 531 kW Clean steam output: 700 kg/h Clean steam pressure: 0.8 bar Feedwater: 15 °C Min. feedwater pressure: 2.0 bar Heating steam pressure: 4.0 bar Heating steam output: 700 kg/h Documentation and operating instructions available. Please contact us if you are interested.

Condition: excellent (used), Year of construction: 1997, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar Redpfx Aast E Rwnofen increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr. Rsdpfx Ajuugi Soafen

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, This is a 305GTP dry steam pressure cooker from the premium manufacturer Hobart, built in 2018. The medium-sized 305 GTP dry steam pressure cooker is often used in the communal catering sector. With its 3 x 1/1 GN racks, it cooks up to 650 portions per hour fresh and to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated steam has major advantages over hot air or combination steam in terms of the heat flux density that can be transferred. Shorter cooking times mean less loss of nutrients and healthy food. The appliance has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this appliance is €28,202 net. Our used appliance service for you - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Condition: Used, tested and fully functional Technical data: - External dimensions WxDxH: 600x785x950mm - Electrical connection: 400V 3NPE, 50 Hz, 26,7kW - SN: 97-0224-579 - Year of construction: 2018 - Portions: 650/h - Capacity: 3x 1/1 GN max. 65mm, 2x 1/1 GN max. 100mm, 1x 1/1 GN max. 200mm Further information: - Gentle, healthy cooking: Steaming, stewing or blanching - 3 different pressure levels 0 / 0.5 / 1 bar for individual adjustment to the food to be cooked - Extremely short cooking times - Individual temperature program (TP) 50 °C - 99 °C as standard - Electronically controlled program sequences - Built-in exhaust steam destruction with vapor condensation as standard SUITABLE FOODS - All types of vegetables - Pulses and rice - Pasta and dumplings - Meat that would otherwise be cooked - Fish and seafood - Desserts such as yeast dumplings or crèmes - and much more. Rodpfx Aajun R R Tofen Shipping: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 305GH-31, This is a dry steam fast cooker 305GTP from the premium manufacturer Hobart, built in 2018. The medium-sized dry steam fast cooker 305 GTP is often used in the communal catering sector. With its 3 x 1/1 GN inserts, it cooks up to 650 portions per hour fresh and to the minute. The dry steam fast cooker is also equipped with a core temperature sensor. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated steam has major advantages over hot air or combination steam in terms of the heat flux density that can be transferred. Shorter cooking times mean less loss of nutrients and healthy food. The appliance has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this appliance is €29,497 net. Our used appliance service for you 6-month warranty on all electrical parts -High-quality brand appliances at fair prices -Professional overhaul / inspection & professional cleaning -tested & fully functional - or money back -Shipping or self-collection flexibly selectable -Competent advice - before and after purchase -Provision of operating instructions, connection diagrams & spare parts -Testing in accordance with DGUV V3 Condition: Used, tested and fully functional Technical data: -Outer dimensions WxDxH: 600x785x950mm -Electrical connection: 400V 3NPE, 50 Hz, 26,7kW -SN: 97-0224-123 -Year of construction: 2018 -Portions: 650/h -Capacity: 3x 1/1 GN max. 65mm, 2x 1/1 GN max. 100mm, 1x 1/1 GN max. 200mm Further information: -Gentle, healthy cooking: Steaming, stewing or blanching Redoupzdmspfx Aafen -3 different pressure levels 0 / 0.5 / 1 bar for individual adjustment to the food to be cooked -Extremely short cooking times -Individual temperature program (TP) 50 °C - 99 °C as standard -Electronically controlled program sequences Built-in exhaust steam destruction with vapor condensation as standard SUITABLE FOODS -All types of vegetables -Pulses and rice -Pasta and dumplings -Meat that would otherwise be cooked -Fish and seafood -desserts such as yeast dumplings or crèmes -etc. Shipping: -Delivery or collection by arrangement -Worldwide shipping on request / Worldwide shipping on request -Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00.

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Rsdjxvq Nrspfx Aafon Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: used, Flow steam generator with 13,2 kW Redpexyttbefx Aafon Electricity: 400 V Pressure steam max.: 2,5 bar Сapacity:  approx. 20 kg/h steam

Condition: used, Durchlaufdampferzeuger mit 23,1 kh/h Rodpfx Asxytrwjafjn Leistung: 35 kg/h Dampf Strom / Volt: 400 Leistung pro Stunde: 35 Zolltarif Nummer: 84022000