Used Sprocket for sale (72)

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. Hfedpozwh Rcefx Agtjl All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket Hfjdswzu Sdspfx Agtjl -Duplex sprocket: 1 " x 17.02 mm 57 teeth -Diameter: 475 mm -Shaft holder: inner Ø 90 x 90 mm -Dimensions: see photos -Quantity: 1x piece available -Dimensions total: Ø 475 x 90 mm -Weight: 62 kg

Condition: used, functionality: fully functional, machine/vehicle number: 102, Jumberca SJM-3 single-sided circular knitting machine, machine number 102. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA: Diameter: 30 inches, Gauge: GG 24, Number of needles: 2304, Manufacturer: Jumberca S.A., Badalona, Made in Spain, No CE marking. APPLICATION: Single-sided knitted fabric in fine gauge: shirts, underwear, nightwear, and lightweight outerwear. Hjdpfx Agozvphtjtofl FREQUENCY CONVERTER: The machine is equipped with a 400 V Toshiba frequency converter mounted on the control column, with electronic speed regulation. INSTALLED EQUIPMENT: Toshiba 400 V frequency converter, Kübler hour meter and counter, Jumberca panel with eight indicator lights, main switch, Square D control panel with start, stop, and emergency stop buttons, Memminger-IRO Pulsonic 3 Mini lubricator, complete upper cam, fabric take-up system with chains and sprockets. CONDITION: Complete and assembled machine, currently protected with film for storage. Fabric from the last production run remains in the machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: Approximate dimensions: length 2.70 m, width 2.00 m, height 2.70 m. No disassembly required. Location: Albacete, Spain.

Condition: like new (used), functionality: fully functional, The machine has undergone a complete overhaul. It features new shafts, bronze bushings, bearings, rollers, rear sprockets, a completely new pneumatic system, a new electrical cabinet, and a feed rate control has been installed. Hedpozv Euvefx Agtefl

Condition: used, Sprockets, triplex sprocket, sprocket, conveyor sprocket Hfsdpfx Agoiq Th Istol -Pitch triplex sprockets: 1"x 17.02 mm -Number of teeth: 40 teeth -Diameter: 340mm -Total width: 105mm -Dimensions: see photos -Intake: Ø 75 - 76 mm -Total dimensions: Ø340 x 105 mm -Weight: 45.3 kg -other sprockets in stock

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Variable feed speed 15-60M/MIN Operator control station Hedpfjzwh Hwex Agtofl Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £125.000 GBP

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm Hedjzulzmopfx Agtofl - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Hfjdpfx Agjtyqizotel Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced Hedjxqzmkspfx Agtsfl - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Hjdpfx Aszht Hwegtofl

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating Hfjdox D Df Nopfx Agtsl - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe Hfodpsx D A Rksfx Agtel - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: good (used), Sprockets, triplex sprocket, sprocket -Sprocket pitch Triplex: 1 1/4" x 3/4" -Number of teeth: 45 teeth -Diameter: 470 mm Hjdpfx Aodgnztogtsfl -Total width: 140 mm -Tooth width: 18.5 mm -Hole: Ø 125 mm -Number: 4x sprockets available -Price: per piece -Weight: 103 kg / 106 kg -other sprockets in stock

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket Hjdpfewlzkhjx Agtjfl -Duplex sprocket: 15 teeth -Diameter: 197 mm -Shaft mounting: Inner Ø 60 x 163 mm -Bolt circle: Ø 94 mm M12 -Dimensions: see photos -Overall dimensions: Ø 197 x 163 mm -Weight: 15.7 kg

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation Hfedpfx Aozzaz Usgtsl o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Sprocket: 2 pinions, 3/4 inch 14 teeth -Diameter: 93 mm -Shaft mount: inner Ø 40 mm -Dimensions: see photos Hjdjv R Tvhspfx Agtsfl -Quantity: 70x sprocket available -Price: per piece -Total dimensions: Ø 93 x 80 mm -Weight: 1.5 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tire with rim and sprocket Hsdsyliypopfx Agtofl -Type: GLE 4.00-4 -Hub: Ø 228 mm -Tooth ring: Ø 20 mm / 55 teeth -Submission/Price: complete -Dimensions: Ø 300 x 245 mm -Weight: 22.7 kg/pc.

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Hfsdpfszmx Udjx Agtel Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket Hjdpfx Aoh Ig Sksgtjfl -Duplex sprocket: 12 teeth -Shaft mounting: Inner Ø 70 mm -Dimensions: see photos -Dimensions: Ø 162 x 275 mm -Weight: 11.3 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Hfjdpfxorvg N Do Agtjl Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 18 teeth -Shaft mounting: Inner Ø 100 mm -Dimensions: see photos -Number: 2x gears available - Price: per piece -Overall dimensions: Ø 237 x 245 mm Hjdpoh Ig Scefx Agtefl -Weight: 30 kg/pc.

Condition: used, Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 15 teeth -Diameter: 133mm -Shaft holder: inner Ø 50 x 70 mm -Dimensions: see photos -Number: 4x sprocket available -Price per piece Hfodpot U Tqcefx Agtsl -Total dimensions: Ø 133 x 70 mm -Weight: 3.6 kg/piece

Condition: excellent (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket Hjdpfx Agjv Ukxuotefl -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4" x 3/4" -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain Hfsdpjyn I Tgsfx Agtol -Gear: 76 teeth -Sprocket pitch: 1" x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

Condition: reconditioned (used), functionality: fully functional, power: 44 kW (59.82 HP), overall weight: 70,000 kg, total height: 5,400 mm, total length: 22,200 mm, total width: 5,400 mm, Rotary Drum Dryer Dutch Dryers - DX 3000 Rebuilt in 2021 Motor power 2 x 22 kW Drive chains and sprockets new Frequency inverter new Hsdpfx Ajyxm E Regtofl Can be disassembled into 6 parts Total weight approx. 70,000 kg Hardly any signs of wear