Used Sprocket for sale (72)

Condition: used, Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 15 teeth -Diameter: 133mm -Shaft holder: inner Ø 50 x 70 mm Lredpfot U Tqcox Af Sjt -Dimensions: see photos -Number: 4x sprocket available -Price per piece -Total dimensions: Ø 133 x 70 mm -Weight: 3.6 kg/piece

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Lrsdpoyk Ea Aefx Af Sjt

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Type: 8-pocket rotary airlock Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Outlet size: 510 x 510 mm Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Lrjdpfx Afezwfbxj Set Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Condition: used, Sprockets, duplex sprocket, sprocket Lrsdpfx Afed Tg Dbs Sst -Number of teeth: 23 teeth -Diameter: 345 mm -Total width: 120 mm -Tooth width: 30 mm -Socket: O 90 mm -Number: 3x sprockets available -Price per piece -Weight: 50 kg -other sprockets: in stock

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1" x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece Lsdpfx Afsyn I Tgs Sert -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 operator panel • Control system: SIEMENS PLC S7-1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic pallet height detection • Clamp for attaching film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting turntable speed from 5 to 15 rpm • Frequency inverter for adjusting film carriage speed • Powerstretch 250% • Film welding with hot pad counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling conveyor at turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer roll diameter: 250 mm Powered roller conveyor for outfeed, with double sprockets, frequency controlled Length: 1470 mm Usable width: 1000 mm Lrjdewxrh Depfx Af Sst Height: 500 mm Roller diameter: 89 mm Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2200 mm with access door, dual-channel safety magnetic sensor integrated in safety control

Condition: used, Inlet diameter: 260 mm Lrjdpfxjzr Hg Se Af Set with sprocket and drive shaft

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket pitch: Duplex 1 1/2 "x 1" Lrjdpfx Afsd Tg Daj Sjt -Number of teeth: 25 teeth -Diameter: 318 mm -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Lrsdpfx Ast Hw R Djf Sjt Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket: is used -Sprockets duplex: 2 1/2 "x 1 1/2" -Number of teeth: 25 teeth -Diameter: 533 mm -Total width: 150 mm -Tooth width: 34 mm -Take: Ø 120 mm -Number: 1x sprockets available -Price: per piece Lsdpfx Afodg Snfs Sert -Weight: 152 kg -other sprockets in stock

Condition: excellent (used), Year of construction: 2018, working size (mm) 400X300mm Distance from saw blade to worktable (mm) 3~200mm Conveyor belt width (mm) 385mm Saw wheel power (kw) 18.5kw Lredpfx Afoi Ay Hqj Sjt Saw unit sprocket diameter (mm) 711mm Feeding speed (m/min) 0~12m/min Hydraulic pressure (kg/cm²) 55kg/cm² Dust outlet diameter 102mmX2 Blade size (L x W x H) (mm) 4572 x 27 x 0.9mm Saw Gap (mm) 1.5~1.8mm Overall dimensions (LxWxH) (mm) 3000x2250x2000 Net weight (kg) 2100kg

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition 2 pieces available roller length: 800 mm roller diameter: 400 mm Lrodpogvvvlofx Af Sst shaft diameter: 45 mm 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,426 h, functionality: fully functional, machine/vehicle number: 101098, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 130 mm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Working stroke, X-axis: 150 mm Travel range, Z-axis: 200 mm Chuck diameter: 160 mm Turning diameter: max. 200 mm Machining diameter: max. 130 mm Part length: max. 110 mm Main spindle Spindle flange according to DIN 55026: Size 5 Spindle bearing, diameter front: 80 mm Speed, hybrid bearing: max. 6,000/7,500 rpm Main drive AC asynchronous motor: 1MB200E Indramat Low-voltage technology: Fanuc Power at 100/40 % duty cycle: 16/24 kW Torque at 100/40 % duty cycle: 102/153 Nm Rated speed: 1,500 rpm Feed drive Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force X and Z: 5 kN Ball screw diameter X and Z: 40 mm Acceleration X/Z: 5/5 m/s² Tool holder Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Tool length incl. holder: max. 190 mm Pitch circle diameter: max. 740 mm Pitch circle diameter Lifetool: max. 620 mm Tool holder with driven tools Lrsdpsy T Iupofx Af Sst Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Speed: max. 6,000 rpm Rated speed: 3,000 rpm Torque at 10 % duty cycle: max. 37 Nm Torque at 25 % duty cycle: max. 26 Nm Torque at 100 % duty cycle: max. 14 Nm MACHINE DETAILS Closed standard automation Number of carrier bars with workpiece diameter 27 mm: 85 Number of carrier bars with workpiece diameter 18 mm: 130 Permissible total load: max. 120 kg Pick-up stroke depressed: 1 mm Pick-up stroke over-depressed EMERGENCY STOP: 5 mm Pick-up spring travel: max. 30 mm Chain length: 162 inches Chain pitch: 25.4 mm Chain tension with 27 carrier bars: 400 N Chain sprocket: Z = 30 Gear ratio: i = 100 Motor revolution/band revolution: 540 Loading time: 2–4 s Electrical equipment Operating voltage: 400–480 V Control voltage DC: 24 V Control voltage AC: 230 V Frequency: 50/60 Hz Connected load: 31 kW Supply line fuse: 50 A Design of the electrical system: VDE 0113 Operating hours: 5,426 h

Condition: used, Year of construction: 2017, operating hours: 1,301 h, 2017 | Caterpillar 259D | Used Tracked Skid Steer | 1301 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Lrsdpfx Afozv Enps Sst 38 inspection points 33 approved ✅ 3 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the mini loader. Deformation of the cabin. Unable to start and use the machine with the starting battery. The undercarriage shows moderate operational wear, with track pads having rounded edges (about 50 to 60% remaining life) and slight superficial abrasion on the sprockets and rollers. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41115 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: approximately 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm with groove -Number: 6x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm Ledewztxpopfx Af Sort -Weight: 22.3 kg/piece

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Lodpfodqy Uqox Af Ssrt Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: used, Specifications: Composed of 2 motorized 90° curved conveyors. Curve radius: 3 m at axis. Total deployed length: 4.80 m. Lsdpjx Sx Iqofx Af Sert Overall conveyor structure width: 750 mm. Varnished beechwood slats: 620 x 54 x 42 mm. Adjustable height from floor: 500–650 mm. Driven by chains and sprockets. Lateral guidance and lower return via slide rails made of synthetic material. Integrated drive gearmotor. Contactor-disconnector box. Emergency stop and isolator. Control cabinet with electronic frequency inverter operating both curved belts.

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; Ledpfxjzrnxco Af Sort small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket Lrsdpfxswztu Ro Af Set -Drive wheel: Conveyor chain wheel with 11 teeth -Division: 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm -Quantity: 2x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: used, For Sale: Multiway Royal Jaw Mats multiway straight: width: - 1170 mm (color Blue) Shafts and gears also available For questions please contact us Viewing on location is possible with kind regards, Leo Holland For sale: multiway ROYAL KAAK mats multiway Straight: width: - 1170mm ( color Blue) Shafts and sprockets also available if required Lrjdpfx Aoq H Tauef Set We would love to hear from you if you have any questions Viewing on location is possible Kind regards, Leo Holland

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Ledpfewvp Ddjx Af Sjrt

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Ljdsf Dlzqopfx Af Sjrt Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Lrodpfxorivbvs Af Sst Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: good (used), Year of construction: 2002, functionality: fully functional, Nailing machine Brand: LG Machine (Swedish) Year: 2002 Assembly nailing machine full automatick, high cpacity, stacking output. Normal wear, chains and sprockets changed a couple of years ago Techn info: Lrsdpfx Afjua A T As Sst Capacity pallet 800x1200mm approx. 600/day Dimensions of finished pallet Min-max: 60x80mm, 120x160mm Thickness of boards: 16,19,22,25mm Width of wood plank min-max 70-150mm Number of nail pipes 6, mechanical Loose nail dimension 80, 90 mm Saw machine (4 saw blades) for cutting the corners Total dimension/set up approx: 15x7m Price: ask for offer

Condition: good (used), Sprockets, duplex sprocket, sprocket -Sprocket pitch duplex: 1" x 17.02 mm -Number of teeth: 57 teeth Lrsdpfx Ajdg Snqof Sot -Diameter: 471 mm -Total width: 90 mm -Tooth width: 17 mm -Hole: Ø 90 mm Quantity: 1 piece available Price: per piece -other sprockets also in stock