Used Spraying Technique for sale (1,873)

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle Ljdsvvvrpspfx Af Ejhn incl. 10 m nozzle hose i.D. *

Condition: used, all stainless steel dimensions: ± 4,500 x 1,800 x 2,400 mm drum diameter: 900mm net drum length 3.000 mm adjustable inclination angle easy to clean inlet height: ± 2,350 mm (adjustable if necessary) discharge height: ± 850 mm Ledpexp Hgmjfx Af Ejhn power 3kW 400V, 50Hz 3 spray pipes Provided for extraction

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Lhsdpfoxp E R Dox Af Een Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. - Panels in-feed system 63.152 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No 1 + 6 reels) Trimming unit 08.055.0.1680 (Kw 1,85 x 1) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 20 + 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) Multi Profile - ( 1 + 3 profiles) by N.C. Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,18) 20 m/min Profile Scraping unit (Multi-profile, by N.C.) 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Milling Grooving unit 08.190 (Kw 4,5 x 1) swivelling 90°/180°/270° (adjustable by CN) (H + V)

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Lsdpfx Afev Ed Uks Eshn Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg OVERALL DIMENSIONS: 8000 x 5320 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; LINEAR SCALES ; PORTABLE HANDWHEEL ; Lhsdpsumpd Asfx Af Ejn THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lhedevvkfdepfx Af Ejn

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² compressed air: 6,3 bar Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO Lodpfou Nc Riox Af Eshn *

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Point 1: The machine is capable of grinding both internal and external gears! Point 2: The machine comes with a converter included free of charge for connection to kW supply according to US standards. This means the machine can be commissioned for use anywhere in the world. Point 3: For sale are 2 x VIPER 500 W machines in excellent condition. You are welcome to inspect them yourself. The machine is currently automated with a robot. The robot can optionally be included upon request. Delivery time and price upon request. Technical Specifications – VIPER 500 W Working Range and Capacities Maximum workpiece diameter Ø 500 mm Maximum grinding stroke 500 mm Working range above table (min–max) 300 – 800 mm Distance center–table (min–max) 442 – 1,042 mm Module / (generating grinding module) 0.5 – 22 Swivel angle (min–max) −180° / +45° Grinding System Grinding wheel diameter (min–max) Ø 221 – 350 mm Grinding worm diameter (min–max) Ø 221 – 350 mm Maximum grinding wheel width 75 mm Maximum grinding worm width 150 mm Grinding spindle drive power 37 kW Maximum grinding wheel speed 6,000 rpm Table and Feeds Table diameter Ø 400 mm Table bore (Ø × depth) Ø 100 × 500 mm Table rotation speed (max) 1,000 rpm Axial feed (max) 20,000 mm/min Radial feed (max) 12,000 mm/min Tangential feed (max) 20,000 mm/min Power and Dimensions Total connected load 60 kVA Machine dimensions (L × W × H) 4,220 × 3,120 × 2,526 mm Filter unit dimensions (L × W) 3,490 × 2,250 mm Net weight (approx.) 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, tooth flank line, and pitch external Measuring system for profile, tooth flank line, and pitch internal (V5) Probing system for phase position Power supply with voltage dip compensation (ESR) Table adjustment 100 mm Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil preparation with band filter (100) Fire extinguishing system Automatic working area door Cleaning unit with spray gun Crane integrated into enclosure Isolation transformer Voltage stabilizer – stabilizer and isolation transformer Signal lamp Services Delivery according to Incoterms 2010 On-site installation and commissioning Operator training – 5 days Interpreter service for training Software Packages Lodpoxpx Hxjfx Af Eohn Gear PRO software Software for spline shaft grinding Software for spline shaft inspection BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization Dressing tool lifetime monitoring (DLC) Flexible profile modifications during grinding Consumables Endless band filter Assembly/disassembly aid for band filter (100) Diamond dressing rollers CVD dressing roller D200/R1 for form grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350/B60 for form grinding Grinding wheel D350/B45 for form grinding Profiled grinding wheel D350/B150 for generating grinding Spacer rings 4 spacer rings B100 22 spacer rings B60 30 spacer rings B45 37 spacer rings B30 Other Components Grinding wheel flange (without spacer rings) Set of standard probes Additional Options Closed Loop 1.0 basic version Interface for external automation

Condition: used, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min .. main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 .. feed velocity min.: 5 m/min .. feed velocity max.: 50 m/min Lsdpfx Afexpx Ddj Eohn STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: new, overall weight: 10,500 kg, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lhjdpfx Asxpwhuof Esn

Condition: good (used), Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Equipment: Basic package AK 315: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Braking system incl. EBS and lighting according to EC directive - Tires: 385/65 R22.5 - 50 mm EC towing eye incl. slip-on shoe - Hydraulically adjustable support leg - Splash protection (inner and side mudguards) - Permissible total weight 16,000 kg - MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emission standard - Load-dependent control of material feed incl. automatic reversing of drag floor - Hydraulically foldable green waste screen basket with tailgate - Impact plate with teeth - Fuel tank 300 liters - Infeed roller: length 1,420 mm, diameter 510 mm, with attached tooth segments - Two-row flail drum with 16 freely swinging cast steel flail holders and replaceable flail tips and 28 fixed ripping teeth - Standard: "Streusel plus" flail tip - Centrally arranged lubrication strips - Electric pump for actuation of cylinder functions (e.g. lifting/lowering support leg and opening/closing tail basket, folding/unfolding rear conveyor, releasing travel drive) when the engine is off - 24-V electrical control system - Separate control box at the rear of the machine - Drag floor with 29 slats - Chain drive for infeed roller and drag floor - Extended radio remote control with 2 foot switches - Acoustic start-up warning - Rear conveyor 6 m, 1,500 mm wide with anti-magnetic center section - Reinforcement plates (Hardox) on the feed hopper sides (loading edge) on both sides Ljdpfxswvub Is Af Eshn - Travel drive preparation - Fire extinguisher - Doppstadt telematics system - Paint finish: RAL2011 deep orange Optional equipment: - Hydraulic travel drive - Extended radio remote control with foot switch - Flail tips "Bear Claw" - Fine shredding basket - Water spraying system - Lighting package: engine compartment and rear conveyor

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Lhsdpfx Aswmf E Ssf Ejn Storage location: Nattheim

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Lhsdpfeu Nigkex Af Ejn Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Lhjdpsxpur Djfx Af Ejn

Condition: used, overall weight: 35,000 kg, empty load weight: 8,868 kg, axle configuration: 3 axles, loading space length: 13,410 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, first registration: 03/2017, suspension: air, tire size: 385/55 R22,5, Year of construction: 2017, mileage: 837,573 km, Equipment: ABS, Tare: 8868kg, MTMA total: 35000kg, Espacio de carga (L A A): 13.410 mm x 2.460 mm x 2.700 mmTamaño de los neumáticos: 385/55 R22.5, Volumen espacio de carga: 89 m³, 1er eje: , 2ª eje: , 3ª eje: , Suspensión neumática, Barra antiempotramiento, Sistema de frenado electrónico EBS, Soporte para extintor de incendios, Soporte para rueda de repuesto (2x), Anillos de amarre Ferry, Chasis con pernos, Puertas de ala contenedor, Registrador de la temperatura, Cuentakilómetros, Enchufe de conexión 1x15 y 2x7 pines, Anti-spray, Precintos aduaneros internacionales, Sistema telemático, Pueden encontrar todos nuestros vehículos disponibles en nuestra página . ¿Necesitan financiación?. En la mayoría de los países europeos ofrecemos soluciones de financiación a medida, full service y servicios telemáticos. Estaremos encantados de poder atenderlos. Ljdpsuzrz Ijfx Af Eshn

Condition: used, overall weight: 36,000 kg, empty load weight: 8,418 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, first registration: 03/2022, next inspection (TÜV): 02/2026, suspension: air, color: white, tire size: 385/65 R22,5, Year of construction: 2022, Equipment: ABS, Unladen weight: 8,418 kg, permissible total weight: 36,000 kg, load securing with certificate, loading area (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tyre size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), loading volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system (EBS), spare wheel holder (2x), bolted chassis, portal doors, double-deck EURO pallet with beams, hubodometer, connector plug 1x15 and 2x7-pin, anti-spray, telematics system. You can find our complete vehicle offer on our website. Looking for financing? With our Value Added Service, we offer you individual financing solutions, full service, and telematics services. We are happy to advise you. Lsdpfx Afoxd Ihbs Eehn

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Ljdpew Aig Sefx Af Ejhn

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m Ledju Ndbpopfx Af Eohn other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Lhjdpexpupvofx Af Een Click on the link below to see a video of the machine running.

Condition: used, overall weight: 39,000 kg, empty load weight: 7,814 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, first registration: 04/2023, suspension: air, color: white, tire size: 385/65 R22,5, Year of construction: 2023, mileage: 65,554 km, gearing type: mechanical, Equipment: ABS, Unladen weight: 7,814 kg, permissible total weight: 39,000 kg, cargo securing with certificate, cargo space (L W H): 13,625 mm x 2,480 mm x 2,700 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo space volume: 91 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, front lift axle, pallet box, electronic braking system (EBS), toolbox, portal doors, double-deck Euro pallet with beams, connection plugs 1x15 and 2x7 pin, anti-spray, telematics system. You can find our complete vehicle range at . Financing desired? With our Value Added Service we offer you tailor-made financing options, full service and telematics solutions. We are happy to advise you. Ledjxq Hnaepfx Af Ejhn

Condition: used, Year of construction: 2006, Technical details: Lhsdpfxou Nu Ime Af Esn voltage: 380 V number of stations: 1 Stück total power requirement: ca. 2,0 kW weight of the machine approx.: 160 kg dimensions of machine: 0,85x0,85x1,0 m Vibratiory bowl feeder Washing unit (vibration technique) with heating: - applicable for cleaning of small parts - drum size 300mm, height 150mm - ejection automatically via screw guide - tank:560x460x280mm, filling approx. 60 liter, with filling display - equipped with rotary waste separator - table: 800x600mm, table height 640mm, catching basin 750x550mm *

Condition: used, overall weight: 36,000 kg, empty load weight: 8,421 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, first registration: 03/2021, next inspection (TÜV): 04/2026, suspension: air, color: white, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 308,249 km, Equipment: ABS, Unladen weight: 8421kg, permissible total weight: 36000kg, load securing with certificate, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm; Tire size: 385/65 R22.5, Certificate DIN EN 12642 (Code XL), Cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, underrun protection, Electronic Braking System (EBS), spare wheel holder (2x), bolted chassis, portal doors, double-deck for EURO pallets with beams, hub odometer, connection plugs 1x15 and 2x7 pin, anti-spray, telematics system. You can find our entire vehicle range at . Financing desired? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We are happy to advise you. Lhedpjxq Hnmjfx Af Een

Condition: used, Year of construction: 2010, Technical details: power consumption: 400 A output voltage: 10 - 60 V control voltage: 3x400V / 50Hz V/Hz Lhsdpfxevtyyro Af Een capacity in kVA: 22 kVA compressed air: 10 bar weight of the machine approx.: 345 kg total power requirement: 12 kW dimensions of machine: 1,3x0,7x1,3 m UNIVERSAL ARC SPRAYING SYSTEM - ARC RECTIFIER max. spraying capacity: Zinc = approx. 40 kg/h AL = approx. 12 kg/h CrNi steel = 30 kg/h A/Bz9Mn = approx. 15 kg/h Pick-up unit for wire spools Air motor drive with handle OSU-LD/U-2 for wire Ø 1.6; Ø 2.0 or 2.5 mm removable control panel Siemens touch screen mobile/mobile Protection class IP 21 Mains fuse 32A *

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Lhedpfjw Rkybsx Af Esn Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg dimension machine xH: 0,8 x 0,7 x 1,65 m Steel and metal band saw Filing band length 2550 mm Additional equipment: Lodpfx Ajva E E Tjf Eehn Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *