Used Spindle for sale (12,346)

Year of construction: 2010, condition: new, 1. BAZ HUeLLER HILLE nb-h260/nb-h290 My.ca.2010 As good as new in original condition. 1.ball screw Y-axis new. Fgjdpfxocrk Ive Ab Tek desweiten other parts On request.

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm Fjdpsi Aphvjfx Ab Togk - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Year of manufacture approx. 1966 Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Fjdpfx Abjx E Rtfs Tjgk Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Condition: good (used), Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Manufacturer: Voumard, grinding spindle precision spindle -Type: C 40-9 D -Recording: M6 -Dimensions: Ø 90 x 335 mm -Transport dimensions box: 480/320/H225 mm -Weight: 17.8 kg Fgedpswub Ifefx Ab Tjk

Condition: used, Year of construction: 2003, INDEX MS32G Overhauled completely: 2020 Original mfd. 2003 6 Spindles 32mm Capacity Siemens 840D control Equipped as pictured Kraft & Bauer fire extinguishing system All spindles on the machine were overhauled 2 years ago incl. clamping cylinder except for one on the GSP. - GSP is equipped with Hainbuch Spanntop and used Röhm jaw chucks - No tools are included Fgsdpfxow A S H Uj Ab Tek - No FZ tubes / no bar pusher - Last year, spindle encoders on the HSP incl. GSP were completely renewed. Equipped with Lenord & Bauer IEMCA SIR-MS32/33/P See attached specifications.

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Fgedpfxox Dd Ide Ab Tsk Tension needed: 400V

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Fedpow S Itujfx Ab Tegk Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: new, Catalogue number: S0367 TECHNICAL DATA work table dimensions 800x800mm engine power S1/S6 3.0 / 4.4kW table hole diameter 190mm spindle diameter 30mm spindle tilt 0° -45° spindle speed 1400 / 3500 / 6000 / 8000rpm right, left rotation spindle vertical travel 175mm spindle working height 125mm max. tool diameter for shaping / for tenoning 180/250mm exhaust nozzle diameter 120mm dimensions length/width/height 2800x1800x1090mm weight 410kg PRODUCT FEATURES Fodpfx Abju Atuxe Tegk Large, massive cast iron work table. Table hole diameter 190mm, with under-table exhaust. Electronic speed readout. Spindle protection for 180mm diameter. Spindle lock installed. 4 speeds. Spindle tilt forward ADVANTAGES – new machine – tiltable spindle – with side carriage – CE certificate Optional: – motor power 4.0 (5.5) kW (HP) – spindle protection for 250 mm contouring – integrated safety guides 350, 500 mm – table extension on the left and right side – spindle diameter 1 1/4, 32, 35, 40, 50 mm The price includes the milling machine with a sliding side carriage. Net price: PLN 17,200 Net price: EUR 4,100 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-site: L & Z VDF Lathe Type: 21 RO Year of manufacture: 1975 Centre height: 210 mm Fjdpfjx E Rr Usx Ab Tsgk Swing over bed: 430 mm Swing over support: 250 mm Spindle bore: 56 mm Spindle speeds: 15 – 1400 rpm Drive power: 5.5 kW Weight: 2.5 t Chuck Tool holder Coolant system Price: Euro 2,500.— plus VAT, ex-site.

Year of construction: 2011, condition: ready for operation (used), A defective CNC 6-spindle lathe Index is available: Speed: 10000rpm, main spindle power: 8.7kW/15kW, max. bar diameter: 22mm, tool stations: 10, travel X/Z: 62mm/85mm, travel Y: +/-12mm, max. clamping diameter: 22mm, machine dimensions X/Y/Z: approx. 3350mm/1850mm/2900mm, weight: approx. 6000kg, control: Siemens 840C. Includes tool holders, Knoll coolant system, Iemca SIR MS 22 P bar loader, HandlingTech robot cell. One spindle must be refitted with new bearings and the synchron spindle must be replaced. Documentation available. An on-site inspection is possible. Fjdpfsx E Ad Ajx Ab Tegk

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Mfd. 2021 (Commissioned 2022) Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Fgedpfxswt Unve Ab Tjk Contact us for full specifications

Condition: used, Year of construction: 2014, operating hours: 8,150 h, Serial number: ZS00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21953 Specifications: Fgsdpfxox A R T Dj Ab Tek Model year: 2014 Hours: approx. 8,400 (may increase) Weight: 48,975 kg 310 kW Cable remote control Outer mantles replaced about 1,500 hours ago (summer 2024) Undercarriage (see photos) Video available Delivery by agreement Description:2014 Sandvik UH440i spindle.Operating hours will increase as the machine is in daily use.The outer mantles were replaced approximately 1,500 hours ago. See video.Delivery by agreement. Hours: 8150 Own weight: 48975 Model: UH440i spindel. SE VIDEO.

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. Fsdpewah Rqjfx Ab Tegk See data sheets for details.

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg ADVANTAGES – manufactured in Poland – very good condition – used milling machine Net price: 6,900 PLN Fgjdpow Em D Hjfx Ab Tok Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Swing over bed: 400 mm Fodpfx Abex E Rr Is Togk Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: good (used), Year of construction: 2017, Machine has 1,350 spindle hours and 7,000 operating hours, Haas VF 3 with 4 axes, Year of manufacture: 2017, Control: Haas, Travel X/Y/Z: 1016/508/635 mm, 24-position tool changer, Taper: SK 40, Table size: 1219 x 457 mm, Through-spindle coolant 20 bar, Spindle speed up to 8,100 rpm, Fourth axis with tailstock, Max. table load: 1,588 kg, Fgedjx Ezk Uspfx Ab Tsk 3D measuring probe, Renishaw measuring probe,

Condition: excellent (used), Year of construction: 2018, INDEX MS16 Mfd. 2018 6 Spindles 1 NCU Capacity: 16mm 1 Syncron Equipped as pictured Fjdpfxew A S Hnj Ab Tjgk Loader: IEMCA NEXT-MS16 Knoll System

Condition: as good as new (ex-display), functionality: fully functional, 7.5 kW Motor, 400 V, 50 Hz Heavily ribbed cast iron table with table rings Electronic soft start and braking device Electric height and tilt adjustment with rapid and slow-motion modes, precise to 1/10, height adjustment approx. 145 mm, tilt adjustment +/- 45.5° 4 spindle speeds: 3,000/4,500/6,000/9,000 rpm Spindle fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut Fjdpfxox Ey S Rs Ab Togk Left-/right rotation, machine socket outlet, arc milling guard type TAPOA, Hofmann "Centrex" Paintwork: grey white/signal blue Table size 2000 x 815 mm Extendable support Heavy-duty milling fence type 2620 Total adjustment via handwheel with indicator included Switchable to tool zero position. Digital display for individual jaw adjustment. Includes quick clamping system for the fence jaws Cast iron fence jaws Safety rulers and moulding board Interchangeable spindle MK5 Power feed unit, 4 rollers, 8 speeds with stand Control panel on top Tool compartment

Year of construction: 1998, condition: good (used), Pass-through spindle oil cooler Fabr.SCHMIPKE Type:DK34-V/SO Bj.1998 Fodpfx Absd Nmnus Tsgk Goods to CNC BAZ Verbaut. 2.Piece of forgo price each. Piece. Building mass: L1.4m B0.5mH1m Gewicht.ca.250kg.

Condition: excellent (used), CATALOG NUMBER 7003 Fsdpfx Absw Emzre Togk Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Fgjdpjx A R Sgofx Ab Tsk Weight Of The Machine Ca.: 6,6 t

Condition: excellent (used), Year of construction: 1987, turning diameter over cross slide: 1,000 mm, turning diameter: 720 mm, turning diameter over bed slide: 1,000 mm, turning length: 3,000 mm, Lathe Geminis GE 1000S Max. turning diameter over cross slide: 1000 mm Fedpfx Abouv Ehqs Tjgk Max. turning diameter over support: 720 mm Turning length: 3000 mm D.R.O. Heidenhain

Condition: used, Year of construction: 2014, power: 5.5 kW (7.48 HP), total height: 1,380 mm, total length: 1,300 mm, total width: 800 mm, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,500 rpm, overall weight: 500 kg, space requirement width: 800 mm, space requirement length: 1,300 mm, space requirement height: 1,380 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, No. 04506 Spindle moulder / swivel spindle milling machine Felder F 700 Z Fedpex A Hbdsfx Ab Togk Used, year of construction 2014, mint condition Spindle swivels 90° - 45° Motor 5.5 kW Spindle diameter 30 mm Milling table opening 230 mm Speeds 3500 / 6500 / 8000 / 10000 rpm Right/left rotation Spindle height above table (usable height) 115 mm Spindle with electric height adjustment and swiveling Digital display for milling height and milling angle Sliding table 1000 mm Control panel “Power Drive” with programming Milling fence 240 with fine adjustment Milling protection device Crosscut fence on sliding table Potential-free contact for extraction control Feed unit Felder F 38, 3 rollers, 8 feed speeds Machine ready to plug in with 16 A plug Additional high-speed spindle HG 2014, 15000 rpm Eccentric hold-down device Aluminum table extension for sliding table Travelling device with handlebar Comprehensive milling and slotting tools, tool sets, sanding sleeves, arc milling hood Incl. Technical documentation Transport dimensions approx. 1300 x 800 x 1380 mm LWH Weight approx. 500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Fsdpfoxziuwex Ab Tsgk Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm Fjdpfx Asvw Rtwob Tegk max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)