Used Spherical Reamer for sale (169)

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) Iedpfjy Ddycex Ag Isat • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) • Automatic edging feed: coil or strips

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Ijdpfx Agoywh Epj Ijat Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Iaedpjyrq Eaefx Ag Iot Polishing unit

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Iaedpfsyg H Hiex Ag Ist Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Iasdpfx Ajylpwuog Ist Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece width (max.): 65 mm, workpiece length (max.): 250 mm, feed rate X-axis: 10 m/min, overall weight: 1,200 kg, TECHNICAL DETAILS Edge band thickness min.: 3 mm Edge band thickness max.: 6 mm Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 65 mm Panel width max.: 65 mm Panel length min.: 160 mm Panel length max.: 250 mm Feed speed min.: 10 m/min Feed speed max.: 10 m/min MACHINE SPECIFICATIONS Dimensions & Weight Dimensions (L x W x H): 4,630 x 1,600 x 1,770 mm Weight: 1,200 kg Number of transport packages: 1 piece Voltage: 400 V Power consumption: 29.37 A Fuse protection: 35 A EQUIPMENT Pre-milling unit - Type: FG 201 - tools included Glue application unit - Type: 1903 Pressure rollers - Type: 1812 - tools included End trimming unit - Type: 1918 - tools included Ijdpfjx Rbm Hjx Ag Ijat Rough trimming unit - Type: FR201 - tools included Corner rounding unit - Type: 1832 - tools included Radius scraping unit - Type: 1964 - tools included

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Iajdpfx Asw I U Rfog Ist Location: Flörsheim

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 320 t, installation height: 615 mm, control type: CNC control, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling Iedpfx Agoy Sarqj Ieat - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles Isdpfx Ajy Saq Tog Isat

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) Iajdpfxoy Su Iye Ag Ijt This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material.

Condition: new, Year of construction: 2025, An efficient lathe with a flat bed and a broad scope of big and small scale machining possibilities. This machine can lathe external, internal, spherical surfaces and threads. Using constant cycles for transverse turning, normal turning, tapering, threading, plunge cutting and contouring drastically simplifies the setup and decreases the time of machining. Technical data Swing over bed Φ 400 mm Swing over cross slide Φ 210 mm Maximum turning length 1000 mm Spindle speed range 0-2000 RPM Spindle bore Φ 75 mm Spindle bore taper MT6 Number of tools in the holder 8 Maximum tool holder size 25×25 mm X/Z axes smallest setting unit 0.001 mm ; 0.001 mm Isdpfxjiz S S Uo Ag Isat X-axis feed speed 8 m/min Z-axis feed speed 10 m/min Tailstock spindle taper MT4 Maximum tailstock spindle feed 120 mm Main motor power 7.5 kW (X) feed engine 6 Nm (Z) feed engine 6 Nm Dimensions 2640×1500×1766 mm Weight 1800 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors hydraulic chuck 8 - position tool holder soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2002, Packer Manufacturer: SZA Federspiel Model: Portropack-E Year of construction: 2002 Additional title: Packing machine for bottle crates Capacity: 30000 Bottles/h Air consumption: 7 m³/h Current: 25 A Voltage: 230 / 400 V AC Compressed air: 5 bar Length: 2300 mm Iedjw Tawzjpfx Ag Ioat Width: 2800 mm Height: 2400 mm Formats: 0.33 l Vichy, 0,33 l Euro, 0.35 l lemonade, 0.5 l NRW bottles, modular crate, 8 packing heads (4x20 and 4x24) Running direction: Module box in longitudinal run, from right to left Operation / Control: Simatic S7-300 / OP17 Position: free standing Base construction: Square frame construction painted on spherical feet Features: Gripper head carrier with pneumatic equipment, operating area covered with windows, container transport, pack transport, 2 gripper head sets, safety device, electrical and pneumatic equipment

Year of construction: 1990, condition: used, 2 caustic tanks and 1 acid tank, all heatable with hot water. Additional title: heatable, vertical stainless steel vessel Volume appr.: 1000 l Ijdpfxsxwy T No Ag Ijat Width: 1 m Height: 2 m Weight: 250 kg Material: Stainless steel Position: free standing Base construction: Cylindrical tank with square tubular feet on spherical caps Features: Top lid, temperature measurement, equipment for heating with hot water

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Iaedpsx T Aqfofx Ag Ijt Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: used, Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you. Additional title: Post-filtration Material: stainless steel Iasdpow Uu U Rsfx Ag Ijt Position: free standing Base construction: Cylindrical housing on tubular feet with spherical caps Features: Pressure gauge, housing with clamping screws or clamping ring

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Ijdew Uvdgopfx Ag Ieat Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: used, Year of construction: 2003, Labelling machine for wrap-around belly labelling of 0.5 and 1.0 l PET bottles. The paper labels are glued to the bottle with hot glue. Additional title: wrap-around labelling Capacity: 24000 b/h Current: 18 A Voltage: 400 V Frequency: 50 Hz Formats: PET bottles, 0,5 l, 1,0 l, 1,5 l Running direction: left -> right Isdpfx Aex T Arpog Ioat Operation / Control: Simatic S 7-300 Material: stainless steel housing Position: free standing Base construction: rectangular, enclosed machine, on spherical feet Features: housing with viewing window, labelling module for wrap-around paper labels, Robatech hot melt melter Periphery: Leibinger Jet 3, best-before date printer

Condition: used, Year of construction: 1999, Single-end bottle washer. Factory overhauled in 2005. Additional title: one end machine Nominal capacity: 6700 bo/h Control range: 7370 bo/h Number of bottle cells: 1620 pcs. Number of bottle cells per row: 10 pcs. Length: 7790 mm Width: 3450 mm Iaedpjxbn Ivofx Ag Ist Height: 2950 mm Weight: 20000 kg Machine partitioning: Chain division 150 mm, cell division 110 mm Operation / Control: Siemens S 5 Material: Stainless steel Position: Free-standing on spherical feet Base construction: Housing in one-piece block design Features: Bottle insertion and removal finger system, chemical dosing stations with dosing pumps, format parts for inlet and outlet

Condition: used, Year of construction: 1992, miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage. Additional title: Fill level inspection system Capacity: 24000 b/h Operation / Control: at control box Material: Painted steel / stainless steel Position: free-standing / mounted on bottle transport Base construction: Housing with evaluation electronics with tubular frame on spherical feet Iasdpfx Agex T An Ds Iet Features: Measuring device, control electronics, bottle ejector

Condition: used, Year of construction: 2009, Inspection system for neck, body and back labels as well as fill level and crown caps Manufacturer: Miho Model: Newton- EC 2001 Year of manufacture: 2009 Additional title: label control for bottles Capacity: 30000 Bottles/h Power: 50 W Current: 0,2 A Voltage: 230 V Frequency: 50/60 Hz Iaedpfx Agsw Tazao Iot Length: 3100 mm Width: 1600 mm Height: 1500 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Running direction: right -> left Position: free standing Base construction: Electronics cabinet on tubular feet with spherical caps Features: Electronics cabinet, measuring devices, fault container rejection

Condition: used, Year of construction: 2003, Empty bottle inspector for glass bottles Additional title: Empty bottle inspection machine Filling line output: 7000 bo/h Power: 2000 VA Isdexbn Uvepfx Ag Ieat Voltage: 230 V Frequency: 50/60Hz Formats: 0,5 l NRW, 0,33 l Steinie, 0,33 l Longneck Operation / Control: Heuft Position: free standing Base construction: Self-supporting housing / machine table, on square tubes with spherical feet

Year of construction: 2001, condition: used, Crate washer for PETCYCLE plastic crates Additional title: Crate cleaning system Capacity: 2950 crates/h Power: 18 kW Current: 38 A Voltage: 230/400 V Frequency: 50 Hz Length: 7300 mm Width: 1570 mm Height: 1710 mm Weight: 1900 kg Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Running direction: transverse Material: stainless steel Position: free standing Base construction: Self-supporting machine housing in block construction on spherical feet Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner, Iaodpsx T Avnefx Ag Ijt

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Height: 3830 mm Iaedpfx Agex T Ayyj Ist Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Operation / Control: Simatic S7-300 Material: stainless steel Position: free standing Base construction: Stainless steel square tube construction on spherical feet Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Year of construction: 2001, condition: used, Packer for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Bottle holders: 5x20, 7x9 or 10x6 bottles. Additional title: Packing machine for bottle crates Output according to design: 4000 crates/h Current output approx.: 3000 crates/h Air consumption: 0 Nm³/1000 bottles Current: 17,59 A Voltage: 220/400 V Frequency: 50 Hz Compressed air: 4 - 5 bar Length: 3680 mm Width: 2940 mm Iodpfxox T Atto Ag Ioat Height: 2610 mm Weight: 4200 kg Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles Running direction: left -> right Operation / Control: converted to manual / PLC defective Material: stainless steel / painted black steel Position: free standing Base construction: rectangular cycle packer machine on four columns with spherical feet Features: Plexiglas safety screen opening upwards, safety grid, infeed and outfeed conveyors, packing head equipment for 0.5 l, 1.0 l and 1.5 l bottles, control panel converted to manual operation

Condition: excellent (used), Year of construction: 2018, Pressure: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Machine weight approx.: 15,300 kg Machine: – Sturdy machine frame – Press beam – Spherical mounting of the press beam with adjustable inclination – Electrohydraulic upper drive – Integrated hydraulic block system – Length measuring system (Y-axis) with dynamic spring-back compensation – Control cabinet air conditioning unit – Tool holder adapter rail – 2 backgauge fingers Special equipment: – 2-axis backgauge (XM/XS, R) Iajdoy H Ia Eepfx Ag Ist – 1 CNC sheet metal support device, 200 daN – 2 additional backgauge fingers, 2/4-axes – 1 pneumatic upper tool clamping, 26 mm – 1 pneumatic lower tool clamping, 55 mm – 1 pneumatic lower tool displacement EHT – 1 CNC crowning system 3000 kN/m – 1 operator safety guard PILZ PSENvip Productivity – 2 bending aids, 1500 N – 1 support bars for bending aid – 1 parking position right, short – 1 special function: fast hemming