Used Sondex Heat Exchanger for sale (13,711)

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Bodpow Ifl Tofx Aqrolh Brand new machine, made in Italy Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Bjdpfx Aqswd Halsrolh Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty New machine, built in Italy The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: excellent (used), heating capacity: 175 kW heat output released into the air: 140 kW fan capacity: 8900 m3/h fuel: solid fuel of wood origin year of manufacture: 2007 weight: 615 kg Bsdeza Dxcepfx Aqrjlh power supply: 380 V CE marking

Condition: used, Year of construction: 1995, operating hours: 20,000 h, functionality: fully functional, power: 410 kW (557.44 HP), smoke pipe connection diameter: 320 mm, For sale: Spänex heating system including discharge unit. The silo discharge is from Pöllhuber. The silo diameter is 8 m. The heating room height is 3 m. Available from mid-year by arrangement. Bljdpfx Aqeykky Isrjh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new - Control cabinet still in original packaging - Located in Genthin Blsdpfxszazraj Aqrjh We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: good (used), functionality: fully functional, input voltage: 220 V, total width: 379 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 03/2027, Heating cabinet Temperature adjustable up to 90°C Stainless steel design Simple technology Dimensions: 379 x 450 x 850 mm (W x D x H) Connection: 220V Used equipment Delivery service available Bledpevdktqofx Aqroh Many other bakery machines in stock!

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² Bljdpfx Aqjud R Iijrjh • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 1,300 kW (1,767.51 HP), overall weight: 17,000 kg, temperature: 25 °C, Description A mobile PCM thermal storage unit transports thermal energy (waste heat or process heat) using phase change materials (PCMs). It stores heat through changes in its state of aggregation, achieving 2 to 4 times the capacity of conventional water tanks while maintaining compact dimensions. This system can be transported on a truck using a swap body system. Storage capacity: 1.3 MWh of heat Key operating principles & details The principle (latent heat): Storage media such as paraffins or salt hydrates melt at specific temperatures, absorbing a large amount of heat in the process. When solidifying, this energy is released exactly at that temperature level. Capacity & efficiency: Since the energy (phase change) is stored without a noticeable temperature increase, the tanks have a significantly greater range. A modern mobile PCM storage unit typically holds storage volumes of several megawatt-hours (MWh). Areas of application: Perfect for supplying hospitals, schools, or swimming pools with district heating, or for residential complexes. The container can, for example, be fully charged at a biogas plant with excess heat and then transported to the point of use to release the heat. Ideal for biogas plant operators or wood gas CHP plant operators, industry, etc., where process heat is available free of charge. Technical data Maximum Storage temperature 75°C Thermal storage capacity gross 1300 kWh Charging and discharging capacity max. 800 kW Electronics on the storage unit: Data acquisition, monitoring, and transmission Bljdpfx Ajylmbqeqrjh Charging and discharging technology on the storage unit Environmental compatibility: non-toxic, can be disposed of without harmful substances, recyclable Connection: two supply and return lines, DN50, leak-proof, insulated, quick coupling Grid connection: 400 kV Logistics configurations: Standard container chassis, semi-trailer, swap body technology with twist locks, trailer solution, adjustable thermal insulation hood Dimensions: 6 x 2.55 m x 2.58 m (L/W/H) (~20 ft container) Weight: 20 t

Condition: used, functionality: fully functional, machine/vehicle number: 00039D88, For sale is a used heating oil pressure unit, model OEG Gerätebau DE 3200, for the reliable pumping and pressure maintenance of heating oil in heating systems. Bedpfx Aqjy U Uc Njrslh This pressure unit is suitable for supplying oil-fired systems and ensures a constant fuel supply. Thanks to the integrated pressure accumulator, pressure fluctuations are compensated, and stable system operation is supported. Technical data: Manufacturer: OEG Gerätebau Model: DE 3200 Flow rate: 320 l/h Operating voltage: 230 V / 50 Hz Nominal current: 2.0 A Max. operating pressure: 6 bar Pressure connection: IG ¾" Suction connection: IG ¾" Year of manufacture: as per nameplate CE marking present

Condition: ready for operation (used), Year of construction: 1999, operating hours: 123 h, power: 550 kW (747.79 HP), nominal heat output: 550 kW (747.79 HP), Manufacturer: MAWERA Type: WR550 Year of manufacture: 1999 Rated thermal output: 550 kW Fuel: Wood chips, sawdust, residual wood, bark, biomass Combustion system: Traveling grate / moving grate Condition: used, functional Description: The MAWERA WR550 is a fully automatic biomass heating system for continuous industrial operation. The system was specifically designed for the economical combustion of wood chips and wood-based fuels with varying moisture content. The robust traveling grate system ensures uniform fuel feed as well as stable and efficient combustion. Due to its massive steel construction and industrial design, the system is particularly suitable for sawmills, wood processing companies, district heating systems, and industrial heating systems. Technical equipment: • Fully automatic fuel feed • Moving traveling grate for different fuel qualities • Automatic ash removal • Hydraulic or mechanical grate drive • Fireproof lining of the combustion chamber • Control via control panel • Suitable for continuous operation • Robust industrial design Suitable fuels: • Wood chips • Sawdust • Planing shavings • Bark • Residual wood Bjdpfx Aqoy U Ru Uerjlh • Biomass fuels Application areas: • Sawmills • Wood industry • Agricultural businesses • Commercial and industrial halls • District heating • Drying systems Optional accessories: • Discharge systems, hydraulic, with push rods SST • Cyclone separator • Conveyor screws • Hydraulic unit • Flue gas fan Inspection is possible by arrangement while the system is still in operation. Subject to technical changes and prior sale.

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,550 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, The SE18 mini excavator, belonging to the 1.8-ton class, impresses with its compact dimensions, powerful performance, and high-quality equipment for professional use. Equipped with the proven Kubota D902 diesel engine, modern hydraulics, a comfortable fully enclosed cab with air conditioning, a heating function with remote control, and a comprehensive set of buckets, this machine is ready for immediate use. Whether in civil engineering, gardening and landscaping, municipal applications, or on confined construction sites – the SE18 offers maximum flexibility, high reliability, and excellent value for money. ✅ Key Features at a Glance ✅ Kubota D902 3-cylinder diesel engine – reliable, fuel-efficient, and durable ✅ 1,550 kg operating weight – compact, stable, and powerful ✅ Fully enclosed cab with ROPS/TOPS – CE-certified and safe ✅ Air conditioning with heating function and remote control – comfortable operation in all seasons ✅ 2 auxiliary hydraulic circuits – suitable for hammers, grapples, earth augers, and more ✅ Adjustable undercarriage 1,000 – 1,250 mm – perfect for confined construction sites ✅ Side-swinging boom left/right – precise operation near walls, edges, and obstacles ✅ Mechanical quick coupler included ✅ 3 buckets included in the set ✅ Immediately available – delivery possible 🔧 Technical Data Model: SE18 Class: 1.8 t mini excavator Operating weight: 1,550 kg Engine: Kubota D902, 3-cylinder diesel Power: 11.2 kW Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Blade: 1,100 mm Boom: Side-swinging left/right Pin diameter: 25 mm Auxiliary hydraulics: 2 auxiliary circuits Fully enclosed cab, CE-certified, ROPS/TOPS Air conditioning with heating function, opening front window, sliding side window Included in the scope of delivery: ✔ Digger bucket 30 cm with teeth ✔ Digger bucket 50 cm ✔ Digger bucket 80 cm ✔ Mechanical quick coupler ✔ Hydraulic thumb / grapple thumb ✔ Air filter ✔ Fuel filter ✔ Oil filter ✔ Tool box ➡️ Get in, start, and work – the machine is ready for immediate use. 🛡️ Safety & Certification The machine is CE-certified and complies with the relevant European directives: ✅ 2006/42/EC – Machinery Directive ✅ 2014/30/EU – EMC Directive ✅ 2011/65/EU – RoHS Directive The cab is equipped with a ROPS/TOPS safety structure and offers the operator protection, a clear view, and comfort. 🧰 Service & Warranty ✅ 12-month warranty throughout Europe ✅ Spare parts available directly from stock ✅ Service and advice from Rheda-Wiedenbrück ✅ Inspection and testing on site possible 🔥 Summer promotion price only €11,890 net – complete set included! 📍 Location: Rheda-Wiedenbrück, Germany 🚚 Delivery possible Blodpfjx H Tirsx Aqroh ✅ Immediately available ✅ Machine is ready for use Our machines can be inspected and tested on site. Contact us for more information, a customized offer, or a short-notice inspection.

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. In very good condition. Bljdpfxey Uzhrj Aqrsh

Condition: used, This listing is for the Cole Parmer Techne Blockice Cooling Heating Block The unit is in full working condition and is ready for immediate use The Cole Parmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Bodpsxhfypefx Aqrslh Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 10001626, Equipment: documentation/manual, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Blodpoy Tccbjfx Aqreh Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Run down tank With spares as seen in asset list Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Bledjy Uuwmepfx Aqreh Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer Bjdpfx Aegrkigsqrslh HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Bsdpfx Aqjk S Dt Tjrolh Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Blodpfjx Ap Itex Aqrjh Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg Bljdpfx Aqeu U Ey Ioroh - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens Bedpfx Aqstwv S Norslh ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Bljdpsy Uuu Eefx Aqroh Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Blodpsy Ur Aaofx Aqrsh Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace

Condition: excellent (used), Sanyo air conditioner with gas heat pump -Model: SGP-E240K1GU2W -Cooling capacity: 71 kW -Heating capacity: 81 kW -Power consumption during cooling: 54.5 kW Bledou Ebguopfx Aqroh -Power consumption during heating: 58.6 kW -Sound level: 62 dB -Refrigerant: R410 -Power supply (V/Hz/Ph): 220/50/1 -External dimensions: 1750 x 1050 x 2300 mm -Number of fans: 2 x 730 mm -Weight: 940 kg -Stock: 1 piece -Condition: used / In working condition

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 5090176, power: 1,190 kW (1,617.95 HP), Equipment: documentation/manual, For sale Sliding two stage and modulating regulation (ZM) diesel oil burner Weishaupt RL5 180-1190kW, 2002. Only burner. Control cabinet with burner control box (LAL2.25) not available. Blsdpfoy Dcciox Aqreh

Condition: like new (used), functionality: fully functional, Newly arrived! We can offer you this top incubator / heating cabinet type B 5028 of the world brand "Heraeus" from federal stocks. The B 5028 is characterized by its particularly precise temperature control and minimal energy requirements and, due to its almost indestructible quality / design, is virtually indispensable in any laboratory. Thanks to its extremely compact design, it fits ideally as a table-top unit even in the smallest corner and can be connected electrically almost anywhere - power consumption only 180 watts! The minimum temperature deviations comply with DIN 58945 Sheet 1, and the appliance also has a timer, fresh air supply and overload/temperature protection. The appliances offered here are all from stock and have never been used - all components are in mint condition and undamaged - see pictures. The delivery takes place in a special wooden box, including power cable and operating instructions. Technical data: Temperature range 10-70 degrees External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity approx. 28 liters DIN 12880 part 1 and 2 tested Protection class 1 IP 20 Temperature monitor according to DIN 12880 class 3.1 Shelves: 2 Weight: approx. 30 kg Shipment will be made within three working days of receipt of payment by a forwarding agent - you can of course also collect the appliance from us during regular opening hours. The total weight of the system including accessories and pallet is approx. 60 kg. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Bedpfoqv Avtex Aqrelh Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.