Used Solid for sale (3,236)

Condition: new, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including feed gearbox Ibsdpfjxl Dyvsx Afisc - Central, user-friendly control for feeds and threads with leadscrew and feed rod - Oversized, hardened and precision-ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinal and cross as standard to reduce non-productive times - One-piece, heavily ribbed machine bed for high torsional stiffness and vibration damping, providing the basis for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. through-hole dia. 150 mm • Follow steady – max. through-hole dia. 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake conforming to CE standards • Foot pedal with braking function, CE compliant • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear wall • Operating tools

Condition: new, carrying capacity 3,0 t number of suction cups 8 suction cup dia. -- Year of construction 2017 - NEW - exhibition machine In contrast to most vacuum systems / lifting systems, the SOLIDswing constructed so that the recorded disk always remains vertical when it is recorded vertically. The plate can without precise positioning of the Iedpfxetv Rhce Afisbc Suction cups are accommodated and this is independent of the balance Way of working much faster and safer than with conventional manual ones Vacuum systems.

Condition: like new (used), functionality: fully functional, Year of construction: 2013, AEOLUS Municipal Solid Waste Treatment Line – 25 t/h Modular Sorting and RDF Production Plant System for production of residual material derived from municipal solid waste “AEOLUS” Ijdpfx Aexlcx Rjfiobc The “AEOLUS” system is the complete, future-oriented solution for the treatment of municipal solid waste with a view to the optimum use of energy and the resources contained in the waste. The modular technology consists of proven procedures comprising mechanica; treatment and sorting of waste, but it also includes pretreatment through pneumatic air classification in order to produce fractions. The segments (modules) of the system’s technology were designed so as to allow the expansion of the system with additions (via interfaces) whenever this is necessary. The key factors of technology are: - The recovery degree of, ie. The amount and - The quality of recovered materials The selection and prioritization of all the above processes vary in each unit depending on the composition of household waste and the potential absorption of individual components from the local market. By this way, the method of the system is characterized by flexibility and adaptability to the specific features of the unit installation area, which is also a significant advantage over other methods of waste utilization. The “AEOLUS” system consists of the following subsystems: No. Machine/subsystem name 1. Regulated feeding system of continuous flow 2. Rotating Drying and Separation Unit of organic and inert materials up to 60 mm 3. Pneumatic air separator for materials classification and size control based on specific weight (heavy and light fraction) 4. Horizontal conveyor belt of hand sorting 5. Inclined cleated elevator of close type 6. Rotaru shredder crusher for the homogenization-smoothing of materials 7. Magnetic metal separator TECHNICAL SPECIFICATIONS TABLE Capacity – 25-30 t/h Operation voltage – 380 V Electropneumatic operation – 6 atm Power – 200 KW Final product dimensions – 3-25 sm Main equipment of “AEOLUS” – Metal SOUKOS ROBOTS construction (LxWxH) = (27,7x9,5x10,5m), which consists: - All the necessary mechanical equipment - Control and programming central electrological panel: S Auto mode S Manual mode (by selection) S Indication of voltage and current S Emergency stop 5 Display of individual parts function via LEDs and section indication Main metal construction properties – 5Watertight and airtight construction S Soundproof overlay S Robust metal construction with enhanced sides and floors S Multiple open able ports of controlled function, for easy access to the various stages Necessary staff (8 hour operation) – Two (2) people and the necessary number for hand sorting.

Condition: used, functionality: fully functional, Edgebanding unit End trimming unit Trimming unit Ibjdpfxsxfuh Do Afiec 2nd trimming unit Sanding unit

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheel -Solid rubber tires: with rim 2 pieces -Tire size: 21x7x15" / (534x178x381) -Rim: Type MH -Hub: cone Ø 68-74 mm -Hole circle: Ø120 mm M8 / Ø300 x 11 mm -Sprocket: Dimensions see photos / technical drawing -Price/Delivery: complete -Dimensions each: Ø 534 x 205 mm -Weight: 91 kg/piece Isdpfx Afoxd Ttceiebc

Condition: new, Solid State Relay Brand Weidmüller Iodswf E U Djpfx Afiobc MOS24VDCI5-33VDC 10 A Stock Number (28601) Pack of 10, €120

Condition: new, Bernardo universal lathe Solid 460 x 1000 Pro Center width 1000 mm center height 230 mm Swing diameter over bed 460 mm Swing diameter over offset 690 mm Swing diameter over cross slide 270 mm Bed width 300 mm Spindle bore 80 mm Spindle holder DIN 55029, D1-8 Speed range (12) 25 - 1700 rpm Range of longitudinal feeds (42) 0.055 - 3.065 mm/rev Face feed range (42) 0.025 - 1.386 mm/rev Metric threads (41) 0.1 - 14 mm Inch thread (60) 2 - 112 Gg/1" Quill diameter 60 mm Quill travel 130 mm Quill holder MK 4 Motor power 5.5 kW (7.5 HP) Machine dimensions (W x D x H) 2300 x 1080 x 1600 mm Weight approx. 1675 kg Machine features - Modern main spindle bearing with angular contact ball bearings in precision design - Hardened and ground gears and shafts, also in the feed gearbox - Central, handy control for feeds and threads with lead and feed spindles - The gears are large, hardened and precision-ground - The speed and feed adjustment is simple, smooth-running and precisely switchable - Longitudinal and flat rapid traverse as standard to reduce idle times - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, thus fulfilling an essential requirement for precise turning Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device Iedpfxoqwkd Uj Afisbc - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diam. max. 150 mm - Rotating steady rest - passage diam. max. 110 mm - Quick-change steel holder with 4 inserts - Safety device for quick-change steel holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slipping clutch - Longitudinal and flat rapid traverse - Interchangeable wheels - 2 centering points - Reducing sleeve - Thread clock - LED machine light - Chip back plate - Operating tool

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2960x1500x2000 mm Weight 4000 kg Total power requirement 19,5 kw Ibsdev A Hkiopfx Afijc

Condition: good (used), Year of construction: 2006, operating hours: 20,000 h, Trumpf Haas HL 4006D YAG Solid-State Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, especially for use with robots and with a range of up to 100 meters via flexible fiber optics. Areas of Application Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated Manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision Machining: The high power and precise beam quality enable precise work in industrial machining. Technical Specifications Manufacturer: Trumpf Haas Type: HL 4006D Isdpoxg Hpcjfx Afiobc Nominal laser power: 4000 W Beam quality: 25 mm.mrad Laser light wavelength: 1064 nm Nominal voltage: 400 V Nominal power: 132 kW Nominal power consumption: 140 kVA Year of manufacture: Oct 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions (W x H x D): 3200 x 1700 x 1250 mm Laser optics including ILV scanner, pyrometer, and various spare parts Computer with WinLas software for parameter control You can find the right cooling unit and robot in our shop Rehsler TW HL4006D Cooling Unit Kuka KR 30/2 6-Axis Welding Robot Other items - new and Used - find it in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1985, functionality: fully functional, The mitre saw is in good condition and has been professionally and conscientiously maintained. Saw blade: HSS, 500 mm diameter Further information available by email or phone. Private sale, therefore no returns, no warranty, and no guarantee. The sale is made under exclusion of any liability for defects. Ibjdpjxgn S Ejfx Afioc No shipping.

Condition: excellent (used), Year of construction: 2002, For sale: AHENA thermal plant. In very good working condition. Ibjdpfx Ajxf Nyhjfiec

Year of construction: 2003, condition: refurbished (used), functionality: fully functional, machine/vehicle number: BF 030003, This heavy duty 1200mm Granulator was refurbished fully in 2020 . Since then it has done only a very few tonnes of light weight containers after the refurbishment. New fixed and fly blades were fitted recently and it has not run since. 4 Rotating blades and 2 Stator blades. The semi solid rotor is water cooled if needed. Single step Belt drive from 110Kw Motor. Up to 1500 kgs per hour depending on the type of materials and feed rate. Air extractio to cyclone and bagging tower for big bags (FIBC) included. Loading conveyor with metal detection tunnel also included. Capable of grinding rubber also as fitted with the water cooled rotor. Two hoppers included , a standard one as shown in pictures and also included is a top entry completely enclosed hopper (not shown) suitable to received pre-shredded plastics or rubber. Iedov Su A Espfx Afijbc

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Quill diameter: 60 mm quill travel: 130 mm quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Iedpfx Afonfu Amjiobc Rapid traverse longitudinal and plane

Condition: new, Year of construction: 2024, T600 Fully Automatic Solid Wood Saw 14 m Fully automatic cutting of large wood with simple-to-use automation. Put down any wood, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). Ijdemdqbmopfx Afiebc • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting Model: T600 Length: 14 m Linear Unit: ProfiStop Omicron Material Length: 1323 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Gumasol, solid rubber tires Softy with rim 2 pieces -Tire size: 3.00-4 -Bolt circle: Ø 70 x 9 mm -Recess: Ø 48 mm -Price/Delivery: complete -Dimensions each: Ø 250 x 90 mm -Weight: 4.4 kg/piece Iedpfx Aexal Htofiebc

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge Ibedpfx Aoxab Nqsfijc - LED machine light - Chip back wall - Operating tool

Condition: excellent (used), Year of construction: 2009, Selling thermal power plant. Very good working condition. Iedpfjxf Nxwjx Afijbc

Year of construction: 1991, condition: used, Used machine Isdpfx Ajw Tfxdofisbc Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Total length of the table 2750 mm Receiving table length 1200 mm Length of the feeding table 1500 mm Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Sound power level 99.2dB(A) Iodpfxolvuqfj Afisbc Weight 800 kg

Condition: good (used), Solid machine vice Manufacturer: WMW Designation: Jaws: 200 x 50 mm Clamping width: 300 mm Footprint: 580 x 190 mm Height: 150 mm Weight: 63 kg Total dimensions: 660 x 190 x 150 mm Price: EUR 600,-- per piece (2 pieces available) Price incl. 19% VAT: EUR 714,-- per piece ( 2 pieces available) Ibodpeuithiofx Afiec Price for 2 pieces: EUR 1.000,-- plus 19% VAT.

Condition: used, Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 18x7x12 1/8 / 457/178-308 -Bolt circle: Ø 178 x 22 mm -Recess: perforated shaft cone Ø 125 - 130 m -Number: 2x tires available Iodpfx Afow U N Nisisbc -Price: per piece -Dimensions: Ø 430 x 180 mm -Weight: 72 kg/piece

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1675 kg. range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts Iodpfjxab H Asx Afiobc - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: used, Solid drill - SK 50 tool holders with coolant ring , four drilling tools = 1 x approx. 50 mm ..... .....L approx. 200 mm 1 x KOMET KUB 2 / 2 / 58 approx. 60 mm .....L approx. 170 mm 1 x approx. 70 mm.....L approx. 170 mm Iedpfew Naivsx Afisbc 1 x approx. 75 mm.....L approx. 210 mm

Condition: used, Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 22x12x16 -Bolt circle: Ø 220 x 31 mm Ibsdpew U N H Ujfx Afisc -Recess: Ø 160 mm -Rim: Dimensions see photos -Number: 2x tires available -Price: per piece -Dimensions: Ø 530 x 305 mm -Weight: 149 kg/piece

Condition: used, Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Bergougnan, solid rubber tires with rim 2 pieces Iedpjwya Tdjfx Afiebc -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Shipping/Price: complete -Dimensions: Ø 400 x 160 mm -Weight: 24 kg/piece