Used Solar Inverter for sale (1,812)

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000 pile driver is a high-performance, versatile machine designed for efficient and precise pile installation in various solar park, guardrail, vineyard, and construction Dodpex Tf R Uefx Ac Nekh applications.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 9,100 mm, total height: 2,900 mm, total width: 4,600 mm, product height (min.): 20 mm, product length (max.): 6,200 mm, product width (max.): 2,600 mm, overall weight: 40,500 kg, Double production solar panel laminating machine The laminator is used for manufacturing solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under the influence of pressure and temperature. The lamination process is conducted under vacuum to prevent unwanted entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be seen in operation. Dodsxzrvkspfx Ac Njkh

Condition: new, Year of construction: 2025, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Dkodoxa Ah Uopfx Ac Nsh Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Condition: new, Year of construction: 2025, Set including LUFT 1500 Inverter Screw Compressor, 500L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 500-liter vertical compressed air tank equipped with fittings and the IZBERG N20S dryer, represents a comprehensive, high-performance pneumatic solution. The LUFT series screw compressor by the Polish brand Cormak features state-of-the-art technology, top-quality materials, and reliable components. Its low operating costs, easy maintenance, ergonomic and robust construction, and high efficiency ensure dependable, trouble-free operation in demanding environments. Technical Specifications – LUFT 1500 with Inverter Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Pipe Diameter (BSP): 1" Maximum Operating Pressure: 10 bar Maximum Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 500L Vertical Air Receiver Tank Capacity: 500 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 600 mm Height: 2098 mm Weight: 145 kg Connections: 6 Connection Sizes: 1 1/4", 2", 1/2" Dsdpfx Ajxnyfmjc Nekh

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor – Advanced Technology and Energy Efficiency in Pneumatics The LUFT 1000 INVERTER screw compressor combines cutting-edge pneumatic technology with high-quality materials and components. With low operating costs, ease of use, ergonomic and durable design, and high performance, this device guarantees efficient and trouble-free operation in demanding industrial environments. The LUFT 1000 INVERTER stands out with its direct-drive transmission, which offers significantly better efficiency and reduced power loss compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output and lower energy consumption. The maximum pressure generated by the compressor is 10 bar. Complete control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving the operator access to all critical system data and ensuring maximum flexibility and process control. Key Advantages of the 7.5 kW Induction Motor with Inverter Drive Significant Energy Savings The inverter enables smooth and precise regulation of the motor’s speed. The compressor adjusts its output to the current demand for compressed air, eliminating idle running, frequent start/stop cycles, and energy waste caused by venting excess air. Depending on your facility’s air usage profile, energy savings can range from 25% to even 50%. The more variable the air demand, the greater the potential savings. Stable Air Pressure With continuous speed regulation, the inverter maintains an almost perfectly stable pressure in the compressed air system, regardless of demand fluctuations. This is critical for the correct operation of pneumatic tools and machines, preventing pressure spikes and enhancing process accuracy. Djdpfx Acjmqlhvj Nekh Reduced Starting Current and Electrical Load The inverter allows for soft-start motor operation, avoiding high inrush currents that can overload electrical networks and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. Extended Component Lifespan Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and motor. This translates into a longer service life for the compressor and lower maintenance and repair costs. Quieter Operation When operating at reduced speeds (during lower demand), the compressor generates less noise, improving the acoustic comfort in the workplace — a significant benefit for both operators and the surrounding environment. Greater Flexibility and Demand Matching The inverter-driven compressor can efficiently meet a wide range of compressed air requirements, making it an ideal solution for facilities with fluctuating air usage throughout the day, week, or month. Advanced Control and Diagnostics The inverter integrates with modern control panels to offer comprehensive monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and allows for optimization of the compressed air system’s performance. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg

Condition: new, Year of construction: 2025, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) Dksdpsmqlqdsfx Ac Noh REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Dedpfx Ajxnyhuec Nekh Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, THEOR 30 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Power 22 kW Power supply 400V/50Hz Theoretical air flow 3,2 m3/min Actual air flow 2,803-3,09 m3/min Dimensions 1380 x 850 x 1160 mm Weight 430 kg Most important advantages: INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving Dedpfjmt Dt Isx Ac Nskh special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, LUFT 1500 Screw Compressor with Inverter is a state-of-the-art solution used in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and durable design, and high efficiency ensure effective and trouble-free operation. The LUFT 1500 INVERTER stands out with its direct drive, which offers significantly better efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM series electronic control panel, giving access to key compressor data and improving flexibility and control over your processes. Technical specifications: Dkodpfx Ajxnxzajc Neh Motor power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1170 x 730 x 1020 mm Weight: 243 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, THEOR 50 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Engine power 37 kW Voltage 400V/50Hz Air flow 5,6 m3/min Dimensions 1500 x 1000 x 1330 mm Weight 830 kg Most important advantages: Dkjdjm Nb Tpepfx Ac Noh INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 270L Vertical Air Receiver + IZBERG N10S Air Dryer This complete set includes the LUFT 1000 INVERTER screw compressor, a 270-liter vertical air receiver with full compressed air accessories, and the IZBERG N10S refrigerated air dryer. Designed for professional use, this system is ideal for industrial plants, workshops, and pneumatic installations that demand high performance, energy efficiency, and reliability. The LUFT series screw compressors by the Polish brand CORMAK incorporate the latest advancements in pneumatic technology, paired with high-quality components and materials. Low operating costs, user-friendly operation, robust construction, and high output ensure efficient and hassle-free performance. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g CORMAK 270L Vertical Air Receiver – Key Features: This 270-liter vertical air tank with an operating pressure of 11 bar is a reliable solution for storing compressed air in industrial environments. It acts as both a buffer tank and a stabilizer for compressor operation. Professional Pressure Vessel Construction – Made from high-grade, 4 mm thick steel, resistant to both pressure and corrosion. UDT Certification & CE Marking – Compliant with EU safety and quality directives. Operating Pressure of 11 bar – Suitable for most pneumatic systems, including those with higher pressure requirements. High Storage Capacity (270 L) – Ensures steady air supply and reduces compressor cycling frequency. Multi-connection Ports – Equipped with five outlets in 1¼", 2", and ½" sizes for versatile system integration. Durable Finish – Internal and external anti-corrosive coating ensures long service life. Space-Saving Vertical Design – Ideal for facilities where floor space is limited. Dedpfxexazlre Ac Njkh Ideal for: Manufacturing facilities Automotive and industrial workshops Pneumatic tool and machine operation Compressed air systems requiring stable pressure and high efficiency This comprehensive compressed air solution offers excellent energy efficiency, stable pressure control, and long-term reliability, making it a perfect fit for demanding industrial applications.

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Dkedpfx Acofh R Tyo Neh Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Dkodpfx Acsfibd Te Neh Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Djdpofh R Tujfx Ac Nekh Machine weight 1250 kg 12260 N

Condition: new, Center length ----- 700 mm Center height ----- 140 mm Spindle diameter ----- 280 mm Main spindle passage ----- 38 mm Bed width ----- 180 mm Spindle speed ----- variable 50-1800 rpm Frequency motor ----- 1.5 kW Including * DELTA frequency switch Dksdpfx Asga Tv Tec Nsh OPTIONS * Support box * SINO 2-axis digital readout * Multifix quick-change chisel holder incl. 4 tappets TOOA1 * Fixed glasses * Meshing glasses * Chuck plate * 4 Chuck 160 mm

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 280 mm, turning diameter over top slide: 165 mm, center height: 140 mm, turning length: 700 mm, total length: 1,280 mm, total width: 700 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 70 rpm, bed width: 180 mm, type of input current: three-phase, overall weight: 320 kg, quill mount: MK 5, three-jaw chuck diameter: 160 mm, Equipment: rotational speed infinitely variable, WMP290V-F Lathe & Milling Combination with frequency inverter including 2-axis digital readout SINO including premium base cabinet Dkodpfx Acjpz I Iqs Njh LATHE Centre distance ----- 700 mm Centre height ----- 140 mm Swing over bed ----- 280 mm Swing over cross slide ----- 165 mm Spindle bore ----- 38 mm Spindle taper ----- MT5 Lathe speed range ----- 70-1800 stepless rpm Tailstock taper ----- MT3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head outreach ----- 185 mm Milling speed range ----- 50-2250 stepless rpm Milling spindle taper ----- MT2 Milling head swiveling ----- +/- 90° Quill stroke ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable Djdpfx Acox Ir Ipe Nskh -Dimensions: 430/300/H340 mm -Weight: 11 kg

Condition: good (used), Berger Type: PSS 8 Berger solar simulator Pulsed Solar Simulator Solar simulator PSS 8 Dedpfedii Dtex Ac Nokh 230 Volt 50 Hz 1000W 3.15ATT Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an inspection device for crystal silicon solar modules. Reliable quality assurance & process control during the entire solar module production The Dr. Schenk solarInspect series was developed to meet the special requirements in the production of crystal silicon solar modules. These ready-to-use Vision Systems provide reliable quality control for the entire ongoing production process. In addition, in the event of process deviations, continuous monitoring of the production process can be corrective action in good time. Dsdjd N Ervopfx Ac Nokh In the production of crystal silicon solar modules, structural glass substrates are used instead of uncoated glass. Structural glass increases the permeability of sunlight. The optical signals in the vision system, which are characterized by the surface structure, which is usually used for glass substrates of silicone solar modules, are often similar to, or even stronger than, the error actually inspected. With SolarInspect, Dr. Schenk has developed and manufactured a system that aims to distinguish between glass structure and and errors on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect the glass defects and distinguish them from the glass structure. Reliable inspection of - uncoated input glass -

Condition: excellent (used), Atlas Type: SC 350 MHG Djdexbd Raepfx Ac Nskh Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: new, Sawing band --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 M/min Djdpfx Acjga Tzue Nokh Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90 ----- 270 mm / 260 x 320 mm Cutting capacity 60 ----- 140 mm / 140 x 140 mm Cutting capacity 45 ----- 230 mm / 220 x 220 mm Cutting capacity -45 ---- 200 mm / 220 x 150 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Quick Release Clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic end stop

Condition: new, ROGI SAWING MACHINE TYPE CY300N INVERTER Sawing dimensions ----- 2750 x 27 x 0.9 mm Cutting speed ----- 20~80 m/min Engine power ----- 1.5 KW ( 400V ) Weight ----- 350 kg Cutting capacity 0 255 mm 200 mm 200 x 320 mm Cutting capacity 45 195 mm 195 mm 195 x 200 mm Cutting capacity 60 125 mm 125 mm 120 x 130 mm Cutting capacity -45 200 mm 170 mm 170 x 200 mm INCLUDED Adjustable material clamp Angle adjustment up to 60 degrees Automatic switch off Low-noise electric motor Closed worm gear transmission Hydraulic pressure control Rotatable undercarriage 45 gr. Emergency stop Cooling pump Support box Quick Release Clamp 1 Saw blade mounted Dedpfx Aega T Eujc Nekh

Condition: ready for operation (used), Mitsubishi FR-A720-2.2K Inverter Freqrol-A700, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Dkjdpfxji Eb I Io Ac Nsh

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: Hanger bolts M10 x 300 with adapter plate Dodpfjuqf Eqjx Ac Nokh -Type: M10 x 300 SW 7 fully assembled -Material: stainless steel V2A -Number: 103 solar fasteners available -Price: per 10 pieces / minimum order 10 pieces -Weight: 0.3 kg/piece (10 pieces 3 kg)

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Dedpfx Ajx Hwcvec Nekh -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg