Used Solar Inverter for sale (1,979)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Łęczna
17,609 km
Chiller
Used Industrial ChillerRHOSS - 102.5 kW | With warranty
Call
Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 102.5 kW (139.36 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,110 kg, input voltage: 400 V, total width: 1,350 mm, total length: 2,650 mm, total height: 2,450 mm, warranty duration: 6 months, Aircooled chiller RHOSS WINPACK SE TCAESY 2110 102.5 KW
Cooling capacity: 102.5 kW / 29.15 tons (12/7 — 35°C)
Year of manufacture: 2015
Options: Hydraulic module
Refrigerant circuit: 1 pcs.
Heat exchanger: Plate
Condenser: Microchannel, Aluminum
Compressors: 1 pcs. Bitzer GSD80295VAB4-1 (scroll) + 1 pcs. Bitzer GSD80182VAB4-1 (scroll)
Type of refrigerant: R410а
Number of fans: 2 pcs. (Frequency inverter)
Hydraulic module: 1 pcs. water pump LOWARA, expansion vessel, buffer tank.
Dimensions: 2.65x1.35x2.45 m.
Weight: 1110 kg.
Working hours: 10659/10659 h.
Condition: Used, tested, fully operational
CONDITION, TESTING & READINESS
The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements.
After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller.
The chiller / kaltwassersatz / is ready for transport and commissioning.
Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options.
WARRANTY & SUPPORT
The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months.
Our company can also offer:
- refrigerant charging;
- replacement of oil and filters;
- technical support.
Knjdpe Afwr Sjfx Abped
LOGISTICS
- Worldwide delivery available
- Support with loading, export documentation, and logistics coordination
Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.
Success:
Your message has been sent.
Listing
Radom
17,719 km
Paper cutting machine
Robust 800Roll-to-Sheet Slitter
Call
Condition: good (used), Robust 800 Roll-to-Sheet Slitter
Machine in very good condition, ready for production.
Slitting and cross-cutting machine, roll-fed. Sheeter
Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc.
Easy format setting, computer control.
Manual and automatic operation.
Technical specifications:
Total power: 3.5 kW
Knsdpfx Abj Ad Hi Iepjd
Working width: 800 mm
Maximum roll diameter: 600 mm
Maximum roll weight: 250 kg
Feeding/cutting length controlled by computer
Working speed adjustable via inverter
Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm
Weight: approx. 1100 kg
Includes a sheet outfeed table.
Success:
Your message has been sent.
Listing
Gronau (Westfalen)
18,475 km
Joinery machine
EssetreTechnoTurn
Call
Condition: good (used), Year of construction: 2012, overall weight: 10,000 kg, Used TechnoTurn
Machine equipment:
Fixed portal. The following components are mounted on the portal:
B-axis with 360° movement, automatically controlled by the CNC. The group carrier plate is mounted on the dovetail slide.
“TURN” milling head for milling and sawing on all 6 sides of the workpiece. The milling head has the following features:
Special milling unit with 2 independent outputs (A-B).
A-output: Tool holder HSK 63 F for automatic tool changing, infinitely variable speed from 1000 to 18000 rpm.
B-output: Flange mounting for the saw blade, max. Ø 600mm with programmable speed from 1000 to 4,000 rpm.
Spindle power of 12 kW at 7000 rpm.
Programmable speed from 1000 to 18000 rpm.
Liquid cooling.
C-axis rotation 540°.
Z-axis travel 1200 mm.
Ksdo Adrcgjpfx Abpond
X-axis travel 800 mm.
Inverter 22 kW for spindle control from 1000 to 18000 rpm.
Technical data:
7 controlled axes: 2X-Y-V-Z-B-A
Axis travel X: 800 mm
Axis travel Z: 1200 mm
Rotation axis B: 260°
Rotation axis A: 540°
Maximum standard dimensions of the supports: 7,000 x 400 (h) x 240 mm.
Maximum length of the supports with optional supports: unlimited.
Minimum dimensions of the supports: 50x50 mm.
Travel speed axis X: 63 m/min
Travel speed axis Y-V: 102 m/min
Travel speed axis Z: 68 m/min
Rotation speed axis B: 12 rpm
Rotation speed axis A: 28 rpm
Electrical system: 400/50Hz ±5%
Air consumption (6 bar): 400 l/min.
Tool changer with 11 positions.
Additional supports in the infeed and outfeed area.
Processing of workpieces of virtually unlimited length.
We will gladly answer any further questions upon request.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Dautphetal - Wolfgruben
18,508 km
Motor coach
SETRA516 HD 48+2+1 WC Küche USB 230V 107tkm
Call
Condition: used, mileage: 107,000 km, power: 335 kW (455.47 HP), first registration: 04/2024, fuel type: diesel, number of seats: 50, gearing type: automatic, next inspection (TÜV): 04/2027, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Setra 516 HD with 48 + 2 + 1 reclining seats, original 107,000 km - automatic transmission -
* Diesel - 10,667 cc - 335 kW - 455 hp - Euro 6 E - Green environmental badge - TÜV (German vehicle inspection)
* 360° rear view camera - 2.3 kW inverter - USB port at each seat - adaptive cruise control
* Xenon headlights - footrests - folding tables - reading lights - luggage nets - retarder -
* Auxiliary heater / radio / ABS / ASR - 2 x 19-inch screens - toilet - onboard kitchen - WIFI / WLAN -
Knjdj Adw Uzspfx Abpod
* Vehicle dimensions: Length: 13,115 mm x Width: 2,550 mm x Height: 3,770 mm
* German vehicle - German vehicle registration document - Sale on behalf of a customer -
* Errors / typos and prior sale reserved
* Please arrange an appointment for viewing and test drive
* Contact: Andreas Vogel
* ATTENTION - Vehicle is stored off-site - Please inquire about the exact location - ATTENTION -
Success:
Your message has been sent.
Listing
Remscheid
18,553 km
Component
HeidenhainUV 105 ID: 344 980-02 SN:11803610A im Austausch (Exchange)
Call
Condition: ready for operation (used), Heidenhain UV 105 ID: 344 980-02 SN: 11803610A – complete overhaul and testing carried out professionally, with test report, 3-month warranty, 100% functional, scope of delivery as shown in the photos.
Important: In the exchange process, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €300 including VAT will be applied.
Attention: You are bidding on a Heidenhain UV 105 inverter, ID: 344 980-02, SN: 11803610A, as part of an exchange service. It has been professionally overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. Both in the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €300 incl. VAT will be issued.
Kedpfxjz R Ii Rs Abpend
Success:
Your message has been sent.
Listing
Radom
17,719 km
Jogging table
Baumann BSB 6L Paper Jogger
Call
Condition: good (used), Baumann BSB 6L Paper Jogger
This machine is 100% functional and in perfect condition.
Purchased from a government-owned entity, it has barely been used.
This is the latest design from a German manufacturer.
Technical Specifications:
Maximum format: 1450x1050mm
Kedpfx Aez R Ipqebpend
Stack height: 185mm
Weight: 700kg
Power supply: 400V
Air squeezing roller
Air table
Tilt angle adjustment
Jogging frequency adjustment (inverter)
Adjustable air squeezing roller force and speed.
Chrome-plated table surface
Success:
Your message has been sent.
Listing
Remscheid
18,553 km
Component
HeidenhainUVR 140D ID: 390 281-01 SN:3857609A im Austausch (Exchange)
Call
Condition: ready for operation (used), Heidenhain UVR 140D inverter, ID: 390 281-01, serial number: 13857609A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos.
Kjdpfxs Ahvhbe Abpend
Note: In an exchange procedure, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €700 including VAT will be applied.
Attention: You are bidding on a Heidenhain UVR 140D inverter, ID: 390 281-01, serial number: 3857609A, as part of an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €700 including VAT will be issued.
Success:
Your message has been sent.
Listing
Sangerhausen
18,318 km
Panel van
VWCaddy Maxi 2.0 TDI DSG Hecktüren Sitzh. PDC
Call
Condition: used, mileage: 7,900 km, power: 90 kW (122.37 HP), first registration: 09/2025, fuel type: diesel, color: white, gearing type: automatic, number of seats: 2, total length: 4,853 mm, total width: 1,855 mm, total height: 1,860 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Diesel fuel system
* BRS (Breakdown Recovery System) for vehicles without electric drive (ESC and eBKV)
* Preparation for trailer hitch
* Breakdown kit
* Speed-sensitive power steering (Servotronic)
* First-aid kit with warning triangle and high-visibility vest
* Front-wheel drive
* Leather multi-function steering wheel
* Partition, without window
* Release for right front seat backrest
* Manual height adjustment for front seats
* Three-point automatic seat belts in front with belt tensioners and height adjustment
* Rear tailgate without window opening
* Preparation for roof rails
* Standard acoustic package
* Seat heating for front seats, separately adjustable
* Windshield, heat-insulating glass
* Central locking "Keyless-Go" without safe lock
* Armrest for left front seat
* Storage bag on the backrest
* Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation
* Exhaust system, WLTP3 N1-II//EU6EA
* Side airbags in front, with head airbags
* Glove compartment lid, lockable with light
* Carpet flooring in the cab
* Wooden floor in the cargo area
* Standard side paneling
* Registration as a truck
* Sliding door on the right in the cargo/passenger compartment
* Exterior mirror housings and various attachments in vehicle color
* Lane keeping assist
* Exterior mirrors, electrically foldable, electrically adjustable, separately heated
* Electronic immobilizer
* FPK (Fleet Performance Key) medium
* Tire pressure monitoring system
* Start/stop system with recuperation
* Storage compartment in the headliner
* Navigation system preparation (baseline)
* Parking sensors front and rear
* Halogen twin headlights
* Front Assist with warning and braking on vehicles, pedestrians and cyclists
* Rain sensor for windshield wipers with light sensor
* Key for locking system with remote control
* 4 speakers (passive)
* Cruise control system (GRA) electronic
* Daytime running light control with assist lights
Knodpfe Ah Ar Tox Abpsd
* Interior lighting concept in the passenger compartment
* Seatbelt warning, E-contact in seatbelt lock
* Heated windshield washer nozzles, front
* Wired & Wireless App-Connect
* 230V inverter and socket for Europe
* Telephone preparation for mobile phone
* Steel wheels 6 1/2J x 16
* 4-cylinder turbo diesel engine 2.0 L/90 kW (4V) TDI Common-Rail basic engine: T0P/TQ4/T6M/T3Y
* Online service, with OCU, with head unit coding, without WFS connection
* Driver alertness system
* 7-speed automatic transmission
* All-season tires 205/60 R16 96H xl, optimized for rolling resistance
* Panel van
* With rear view camera system (version 2)
* Air conditioning with electronic control
* With predictive speed limiter (pLIM)
* Seat covers in fabric
* Pan-European eCall
* Standard front seats
* Extended maintenance interval
* Service indicator 30000 km or 2 years (variable)
* With multi-function camera
* Heat-insulating glass (green)
* With traffic sign recognition
* Digital radio reception
* Prepared for "VW Connect" and "VW Connect Plus"
* External USB Type-C data socket(s) with increased charging power
* Rear damping, raised chassis
* 5-year manufacturer's warranty for Germany
* Radio Ready to Discover with 10" touch color display, with navigation system preparation
* Assistance package
* Winter package "Basic"
* Technology package
* Comfort package
* Center console
* Interior rearview mirror with automatic anti-glare function
* Decorative inserts
* Headlight range control
* Preparation for alcohol interlock
Vehicle is fr
Success:
Your message has been sent.
Listing
Isaszeg
17,957 km
Chamber dryer
IncpolanDry 6
Call
Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 7 kW (9.52 HP), input current: 16 A, input frequency: 380 Hz, temperature: 70 °C, overall weight: 2,000 kg, fuel type: electric, Equipment: documentation/manual, Selling an Incoplan Dry 6, manufactured in 2018.
7 kW electrical output.
8 m chimney.
Inverter for wind speed regulation.
2000-liter hot water storage tank.
100 kW wood-fired boiler.
Kjde Ah Ikyepfx Abpend
Total price: 25,000 EUR.
Tel: 00 36 70 619 08 06 (Viber, Whatsapp)
Success:
Your message has been sent.
Listing
Niederlangen
18,411 km
Band Saw
MEP - VollautomatSHARK 331 DIRECT
Call
Condition: new, cutting diameter 300 mm
capacity 90 degrees: flat 330 x 260 mm
capacity 90 degrees: square 260 x 260 mm
capacity 45 degrees: round 240 mm
capacity 45 degrees: flat 240 x 160 mm
capacity 60 degrees: round 160 mm
capacity 60 degrees: flat 150 x 150 mm
band speed 15 - 100 m/min
dimensions of saw-band 3650 x 27 x 0.9 mm
Control MEP CNC
total power requirement 2.2 kW
weight 1200 kg
The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic
bandsaw of the highest caliber. It has been specifically developed for the
high-precision cutting of solid materials, pipes, profiles, and metal bars.
Thanks to its extremely robust construction and maximum flexibility, it
adapts perfectly to any industrial production process.
CNC electro-hydraulic automatic bandsaw featuring:
* Automatic mode – for fully automated series production
* Semi-automatic mode – for controlled individual cuts
Technical Highlights & Industry 4.0 Readiness
- Direct control technology:
* Makes the sawing machine fully digital, networked, and ready for
. Seamless integration into automated production lines
- Intuitive 10" touchscreen display:
* The completely redesigned user interface minimizes staff training time and
. ensures smooth process management.
- Integrated cutting library:
* Once the material dimensions, type, and thickness are entered, the control
. system automatically suggests the best saw blade, the ideal cutting speed,
. and the optimal force parameters. The operator, however, retains full manual
. control at all times.
- IIoT-ready & real-time support:
* Real-time data transmission enables predictive maintenance, minimizing
. downtime. If necessary, technical support can access the control system
. directly via secure remote access—no VPN required.
Ksdpe Afzuusfx Abpjnd
- Future-proof safety:
* The machine already complies with the stringent safety and efficiency
. standards set for 2027.
- Massive data storage:
* Capacity for up to 100,000 programs and 9,999 cutting sequences.
Description:
- Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade)
- MEP CNC "DIRECT" control technology
* User interface with an intuitive 10" touchscreen display
* Includes mechanical buttons
* Ensures reliable, simple, and intuitive operation
* Real-time monitoring of all cutting parameters
* Swivel-mounted arm for convenient and safe operation
* Display and logging of alarms and error messages
* Massive data storage: up to 100,000 programs and 9,999 cutting sequences
- Miter cuts—possible on one side up to 60°
- Protective enclosure for operator safety
- Infinitely variable adjustment * Cutting speed from 15 to 100 m/min
* Controlled via frequency converter (inverter)
- Latest-generation hydraulic power unit
* Highly efficient with low energy consumption
- Material feed via stepper motor and recirculating ball screw
* Mounted on opposing ball bearings
* 600 mm single-stroke capacity, repeatable for cutting any desired length
- Coolant tank integrated into the machine base
- Chip-clearing brush
- Bi-metal saw blade suitable for solid and profile materials
- Tools and operating manual, including a spare parts list
* Angular accuracy = 2/12 degrees
* Length accuracy = ± 0.1 mm per feed stroke
Information from the manufacturer – please note:
If this saw is installed in a system equipped with a
residual current device (RCD/GFCI),
i...
Success:
Your message has been sent.
Listing
Langenfeld (Rheinland)
18,571 km
Truck-mounted work platform
IvecoDaily 70C18 Hubarbeitsbühne Steiger Fran
Call
Condition: used, mileage: 98,416 km, power: 132 kW (179.47 HP), first registration: 05/2019, overall weight: 7,000 kg, wheelbase: 4,100 mm, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, cruise control, onboard computer, power mirror, Special Features
- 3-seater
- Electric windows
- Cruise control
- Radio
- ABS / ASR
- Height- and reach-adjustable steering wheel
- Electrically adjustable and heated mirrors L/R
- Differential lock
- Air conditioning
- Power steering
- Electronic immobilizer
- Central locking with remote control
- On-board computer
- Twin tires
- Reversing camera
Superstructure
France Elevateur 172 TPFcc
- Working height: 17.00 m
- Maximum outreach: 9.00 m
- Slewing angle: 400°
- Setup inclination: 5% / 15%
- Steel carrier system with 2 extensions
- Internal energy supply routing
- Electro-hydraulic controls
- Plastic work basket (1000 V insulation)
- Ground controls (5 m cable)
- Hour meter
- Emergency pump
- Hydraulic pump activation from driver’s cab
- Basket arm rotation angle: 140°
- Acoustic tilt warning system
- 2 hydraulic outriggers
- Engine start-stop function in work basket
- LED beacon lights
- 230V socket in the basket
- 2 x 60° basket rotation
- Power inverter 3600 VA
- Work basket (L/W/H): 1300 x 700 x 1150 mm
The Iveco Daily with France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electricity, lighting maintenance, as well as municipal services and painting work. Besides the diesel drive, the vehicle is also equipped with an electric drive, allowing the work platform to be operated fully emission-free.
Once arrived at the job site, the electric drive can be activated so the platform can be stabilized electrically and without emissions.
Knedpfx Asy Ia Iqsbpod
Iveco Daily with aerial platform 172 TPFcc – your reliable partner for working at heights!
All functions of the access platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German documents, TÜV inspection, and statutory accident insurance (UVV) are included free of charge. Additional equipment such as tow bar, lighting, shelving, and more can be fitted upon request.
Immediately available from our warehouse in Langenfeld!
ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles
All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photographs taken in-house – ensuring total transparency regarding the actual condition of the vehicle.
Our vehicles undergo a comprehensive reconditioning process in our in-house specialist workshop prior to sale – including mechanical, bodywork, and paintwork. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage.
Trust is good – verification is even better: at your request, the vehicle can be inspected by independent expert organizations such as TÜV, DEKRA or KÜS – also available as a remote inspection.
Our services for you:
- Delivery of your vehicle to the location of your choice
- Complete handling of export formalities, including export registration plates
- Individual financing and leasing offers
- Trade-in of your current vehicle
- Installation of special equipment as desired
Looking for something specific?
If you do not currently find a suitable vehicle for your company in our inventory, please contact us – we are always happy to help.
Success:
Your message has been sent.
Listing
Bitburg
18,682 km
Wide belt sanding machine - immediately available
Casadei / SCMLibra 45/2 RTC 135
Call
Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander
5257433 "Z" Designation for RTC 135
5257452 Vacuum table with electric fan 3 kW
5257453 Oscillating belt air-blast device for
5257454 Oscillating belt air-blast device for
5257462 Reinforced motor 15 kW (20 HP)
5257485 Roller table at infeed and outfeed for
5257499 Grooved rubber pressure roller, 2nd position
5257500 Grooved rubber pressure roller, 3rd position
5257504 Infinitely variable conveyor feed with inverter
5257605 Door with inspection window
5257606 LED lamp for internal illumination
TECHNICAL DATA
Dimensions and Weights
Length (product) approx. 1800 mm
Width/depth (product) approx. 2000 mm
Height (product) approx. 2070 mm
Extraction Connection
Number of extraction ports: 2
Extraction port diameter: 200 mm
Electrical Data
Feed motor power: 0.8 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Height adjustment motor power: 0.25 kW
Output power (motor power): 11 kW
Sanding Unit
Sanding belt length: 2150 mm
Sanding belt width: 1370 mm
Max. sanding width: 1350 mm
Feed Unit
Feed speed: 4.5 / 9 m/min
Workpiece
Min. workpiece height: 4 mm
Max. workpiece height: 170 mm
Product Information EU 2023/2854
Type of generated data: usage data
Format of generated data: common, machine-readable formats, e.g., JSON
Data volume: up to 5 MB
Ksdoy Ehiwopfx Abpend
Continuous real-time data generation: yes
Data storage location: on the device and a remote server
Data access: on the device and via physical and wireless interfaces
Location: ex stock 54634 Bitburg
- immediately available -
Success:
Your message has been sent.
Listing
Dordrecht
18,611 km
AJCE AVH30ST+ SHEET PILE DRIVER VIBROHAMMER SIDE GRIP
AJCEAVH30ST+ SHEET PILE DRIVER VIBROHAMMER SIDE GRIP
Call
Condition: new, General information
Year of manufacture: 2026
Reference number: 3
Drivetrain
Make of engine: Parker
Weights
Empty weight: 3.000 kg
Functional
CE mark: yes
Condition
General condition: very good
Technical condition: very good
Visual appearance: very good
Other information
Fits to following machines: 20-38TON
Delivery terms: EXW
Production country: KR
Additional information
Please contact Ö. Inalkac for more information
We offer you new AJCE AVH30ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH30ST+ is availbale with 3 types of changeable side clamps!
AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK!
DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK!
ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER!
DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK!
HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON!
DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU!
Excavator: 20-38TON
Weight: 2800 kg (without mounting cap)
Working pressure: 200~ 250Bar
Oil flow: 170-210 l/min
Centrifugal Force : 640kN
Knedpsy At Adefx Abpsd
Frequency: 2700 rpm
Eccentric moment: 6kgm
AVH30ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile Drivers.AVH40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile .
ADVANTAGES:
◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams.
◉ No manpower needed except excavator operator resulting less cost.
◉ Quick change of hands suiting your pile type and size.
◉ Special design resulting, no over heating problem.
Success:
Your message has been sent.
Listing
Langenfeld (Rheinland)
18,571 km
Truck with aerial work platform
IvecoDaily 70C18 Steiger France Elevateur 172
Call
Condition: used, mileage: 110,685 km, power: 132 kW (179.47 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 5,880 kg, overall weight: 7,200 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, emission class: euro6, Equipment: ABS, air conditioning, cruise control, onboard computer, soot filter, Special features
- 6-speed manual transmission
- Electric windows
- Radio
- ABS / ASR
- Differential lock
- Air conditioning
- Power steering
- Central locking
- Rear view camera
- 6 new tires
- New windscreen
Superstructure
Aerial work platform France Elevateur 172 CPL
- Working height: 17.4 m
- Maximum outreach: 10.3 m
- Basket load: 265 kg / 2 persons
220V power outlet in the platform
- Turret rotation: 400°
- Maximum working inclination: 5%
- Maximum tilt: 15%
- Steel boom with 2 telescopic sections
- Articulated jib with 180° pendulum motion
- Cable duct integrated into the telescopic boom
- Electrohydraulic and sequential controls
- Remote control in cab
- 4 hydraulic outriggers
- Tilt alarm
- Plastic work basket (1000 V insulation)
- Priority electrohydraulic emergency controls
- Road position return light in cab
- Hour meter
- Emergency pump
- Sine wave inverter 2500VA
- Basket dimensions: 1300 x 780 x 1150 mm
The aerial work platform, mounted on a very stable 7.2-ton truck, is especially suitable for safe operation on telecommunications networks, public lighting maintenance, telecommunication lines, or facade work.
This is an especially robust vehicle with numerous additional features and equipment.
The platform from France Elevateur allows work at heights of up to 17.4 m and a lateral outreach of up to 10 m. A 220V socket in the work basket enables connection of various power tools such as drills, lamps, or measuring devices.
The vehicle is equipped inside with a workshop setup including drawers, cupboard and workbench for secure storage of tools and small parts.
All functions of the access platform have been checked in our workshop and are fully operational.
The vehicle is ready for registration.
Included in the price are German registration documents, TÜV inspection, and UVV safety inspection.
Additional equipment such as a tow bar, lighting, shelving, and further options are available on request.
The vehicle is now available at our location in Langenfeld.
ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles
All vehicles we offer are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations use only original photos taken at our own premises – thus we guarantee full transparency concerning the actual condition of the vehicle.
Our vehicles undergo comprehensive preparation before sale in our own specialist workshop – including mechanics, bodywork and painting. Thus, they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage.
Trust is good – control is better: On request, your vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection.
Our service for you:
Delivery of your vehicle to your desired location
Complete processing of export formalities, including export license plates
Knjdpjxwlr Rjfx Abpsd
Individual financing and leasing offers
Trade-in of your current vehicle
Installation of special equipment on request
Success:
Your message has been sent.
Listing
Tönisvorst
18,574 km
Three-phase motor
DanfossVCM 330/M21 R1 L 2T 192 H 1514
Call
Condition: new, Three-phase motor
Manufacturer: Danfoss
Type: VCM 330/M21 R1 L 2T 192 H 1514
Knjdsxughzjpfx Abpjd
400 Volts
3 kW
6.4 Amps
3000 rpm
Equipped with frequency inverter
Danfoss 0 - 7560 rpm
Unused, in opened original packaging
Transport dimensions:
Length: 350 mm
Width: 195 mm
Height: 270 mm
Weight: 29.5 kg
Success:
Your message has been sent.
Listing
Vall de Uxó
19,605 km
STORTI Package Cutter
Storti
Call
Condition: used, functionality: fully functional, STORTI Package Cutter:
Machine in working order.
Kedpsxt Iu Hefx Abpond
- Fixed base with 3 movable stops for squaring packages
- Waste conveyor belt at the base, recently replaced
- Mobile cutting unit with geared motor and inverter
Success:
Your message has been sent.
Listing
Leiria
19,702 km
Extruder
EremaD120
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 1995, input voltage: 400 V, type of input current: three-phase, New conveyor belt equipped with a metal detector.
New 110 kW motor with frequency inverter new.
Vacuum system with two zones.
Kodpfx Abswqrrtopond
Erema double-piston screen changer.
Die-face cutting system; water cooling; centrifuge; conveying fan.
One barrel and two used spare screws
Success:
Your message has been sent.
Listing
Germany
18,491 km
Swivel mill
SCMTI 5
Call
Condition: new, Year of construction: 2025, New machine
Year of manufacture: 2025
Standard Equipment and Accessories
- Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system.
Includes:
* 15" touchscreen monitor
* Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes
* Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point)
* Capability to store up to 1000 programs with associated images
* Capability to store up to 1000 different tools with associated images
* USB port
* Ready for network connection
- Operator aid on the electronic control, including:
* Tool database management
* Display of coordinates at 3 points on the tool for new reference (zero) point determination
* Management of tool edge speed
* Operator support for common machining tasks
- "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable.
- Aluminium fence jaw for the milling fence with inserts for continuous support
- "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface
- Electrical pre-wiring for a power feed unit
- Spindle rotation direction: right/left
- Automatic motor start
- Version M-E includes:
* Electrospindle with max. performance from 3,400 rpm
* Electrospindle power 7.5 kW (10 HP) [S6 -40%]
* Interchangeable MK5 spindle
* Inverter for speeds from 900 to 12,000 rpm
- Interchangeable MK5 milling spindle
Safety/Protection
- Milling guard, max. tool diameter 160 mm
- Electronic motor brake effective even without mains power
- Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder
- Electropneumatic spindle lock
- Microsafety switch on machine door
- Emergency stop button
- Lockable main switch
- Motor protection switch
- Control circuit 24V
- CE Declaration of Conformity
- Frequency 50 Hz
- Base
Kedpjx Nbzuefx Abpend
- MACHINE LANGUAGE: German
- Standard safety regulations
- Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table.
- Voltage 400 V, EU
- Quick tool clamping system "T-SET"
Allows clamping/unclamping of tools via easy application with a compressed air gun.
- L'invincibile TI 5 CE version
- "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces
- Emergency stop switch
- Milling spindle diameter 30 mm
Availability: short-term
Success:
Your message has been sent.
Listing
Balaguer
19,532 km
Band saw
MGBMSO 320L
Call
Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L
Kjdsx Ng Sxepfx Abpond
Used semi-automatic band saw
- High-capacity band saw with roller feed
- Progressive hydraulic feed
- Chip cleaning brush
- Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min
- Front millimeter stop of 500mm with electric limit switch
Serial number: 41021
- Blade dimensions: 4160x27x0.9mm
- Motor: 1.5kW
- Round cutting capacity at 90°: 320mm
- Rectangular cutting capacity at 90°: 500x320mm
- Square cutting capacity at 90°: 320mm
Success:
Your message has been sent.
Listing
Żychlin
17,779 km
Binder KBF 720 E7 climate chamber
BinderKBF 720 E7
Call
Year of construction: 2026, condition: like new (used), Binder KBF 720 E7 from 2026.
Device is like new, 2-year warranty on spare parts.
PRODUCT DESCRIPTION
A proven specialist for reliable ICH stability testing in the pharmaceutical industry: the KBF handles all long-term tests, accelerated tests, and extreme condition tests. It meets all important ICH requirements, from precision to programming and documentation. Features flexible water supply options for all installation sites. Additionally, the new KBF consumes up to 40% less energy than its predecessor. With optional lighting modules, the KBF becomes an ICH photostability testing chamber or a plant growth chamber.
KEY FEATURES
Temperature range:
0°C to 70°C
Humidity range from 10% to 80% RH
Proven APT.line™ preheating chamber technology
Energy savings of up to 40% compared to previous model
Energy-efficient cooling thanks to modern inverter refrigeration unit
Cooling using environmentally friendly refrigerant R-600a
Heated door to prevent condensate formation
Adjustable fan speed
Humidity control with capacitive sensor and fast-reacting steam humidification
Robust housing construction with HIT sandwich technology
Inner chamber made of stainless steel
Inner doors made of metal oxide-coated safety glass
Two stainless steel wire shelves
80 mm x 45 mm access port with silicone plug
Freestanding unit with durable double casters and front brakes
Intuitive controller with touchscreen and both segment programming and real-time programming
Ergonomically adjustable control terminal
Signal triangle with illuminated status indicator
Internal data logger, measurement values in open format readable via USB
Independent temperature safety device class 3.3 (DIN 12880) with visual and acoustic alarm
Device self-test for comprehensive status analysis
Ksdjy R Uaaepfx Abpend
Data exchange interfaces:
Ethernet, USB
Optional lighting modules for ICH photostability testing
Optional LED lighting modules for plant cultivation
Success:
Your message has been sent.
Listing
Remscheid
18,553 km
Component
HeidenhainUM 113 Umrichter ID 325 002-02 generalüberholt mit 3 Monaten Gewährleistung SN 12156319 im Austausch (Exchange)
Call
Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 113 . 325 002-02 SN:12156319 on an exchange basis (exchange service). The unit has been professionally and completely overhauled and tested, comes with a 3-month warranty, and is 100% functional. Delivery contents as shown in the photos. Important: In the exchange procedure, your defective core unit must not show any mechanical damage such as fractures, since these are not repairable. In such cases, an additional charge of €500 including VAT will be invoiced.
Kodpfx Aex Etcisbpjnd
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Tatabánya
18,030 km
Bridge Crane,Overhead Crane
KoneHK 0049 - M / HK0049 - E01
Call
Condition: used, Double-Girder Overhead Crane, KONE / Konecranes, 25/25 t (max. 30 t),Bridge crane, Used machine
Manufacturer: KONE Cranes / Konecranes
Drawing No. / Type Specification: HK 0049 - M / HK0049 - E01
Lifting capacity: 25/25 t (maximum tested lifting capacity: 30 t)
Span profiles: 14 m
Lifting height (travel): 15.5 m
Condition: Used, in excellent and continuously maintained condition, ready for immediate operation
Special feature: The crane comes with complete factory and periodic service documentation, including manuals. In 2023, it underwent an official Konecranes factory wire rope replacement (fully certified), and it has been upgraded with a modern, integrated Konecranes radio remote control and frequency inverter drive system.
Overall dimensions: 14,318 mm (total bridge length) x 4,334 mm (total height)
Kjdpfxjzi Ua Ij Abpend
Technical and operating parameters:
Crane classification (according to FEM): Steel structure: 2 / Machinery: 1 Am
Rated lifting speed: 3.2 / 0.5 m/min
Trolley travelling speed: 16 / 5 m/min
Bridge travelling speed: 20 / 5 m/min
Installed motor power (Lifting): 15 / 2.5 kW (30% ED, per hoisting drum)
Installed motor power (Trolley): 2x 0.65 / 0.15 kW (40% ED)
Installed motor power (Bridge): 2x 1.8 / 0.5 kW (40% ED)
Supply voltage: 3x 380V, 50Hz + N
Control voltage: 48V, 50 Hz
Main fuse: 160 A
Crane control: Upgraded Konecranes radio remote control for standard operation, plus an independent backup pendant control festooned along the bridge
Power supply: Festoon cable system
Environmental fire hazard classification: Class "C"
Protection class: IP 55 (motors), IP 54 (control panel)
Safety devices: Hoisting drums are equipped with electronic overload protection, limit switches for both bridge and trolley travel.
Success:
Your message has been sent.
Listing
Kecskemét
17,945 km
Wide belt sander
VietS1 223 2200 R/KRT
Call
Condition: used, Year of construction: 2012, Condition: Used, ready for operation
• The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore.
• The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation.
Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation.
• The third unit is a finishing brush roller.
Technical specifications:
Working width: 1350 mm
Sanding belt size: 1380 x 2200 mm
Workpiece thickness: 3–160 mm
Motor power of first unit: 11 kW
Motor power of second (combined) unit: 11 kW
Feed speed: 3–16 m/min
Feed motor power: 1.5 kW
Pneumatic connection: 6 bar
Air consumption: 17 Nl/min
Extraction port diameter: 158 mm
Extraction air speed: 25 m/min
Required extraction capacity: 3095 m³/h
Net machine weight: 2450 kg
Width: 2320 mm
Length: 2030 mm
Height: 2050 mm
The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame.
Table rollers: one roller is positioned before and one after the feed belt.
• The feed belt has a 60 Shore hardness rubber surface with a concave pattern.
• Precise tracking of the feed belt is ensured by an automatic centering unit.
PRESSURE HOLD-DOWN UNITS
• Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded.
SAFETY EQUIPMENT
• with CE standards.
Knodszlxp Sjpfx Abpsd
Options:
• Electronically controlled sensing unit for the 42-section sanding pad
• Front table extension with two roller cylinders
• Rear table extension with two roller cylinders
• Complete vacuum table with vacuum pump: 2.2 kW – 3 HP
• Electro-pneumatic engagement/disengagement of the contact roller
• Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System)
• Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch)
• Electro-pneumatic engagement/disengagement of the contact roller
• Electro-pneumatic engagement/disengagement of the sanding pad
• Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System)
• Possibility of reversing the sanding belt rotation direction
• Electronic inverter 11 kW (15 HP)
• IPC COMPACT 8.5" control panel
• Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP
Specifications are provided for information only.
This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.
Success:
Your message has been sent.
Listing
Gilze
18,624 km
Volvo FH 460 8x2 PALFINGER PK 100002 / JIB – WINCH / TRACTOR UNIT – FLATBED TRUCK
VolvoFH 460 8x2 PALFINGER PK100002 / JIB - LIER / TR...
Call
Condition: used, mileage: 47,971 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,530 mm, total width: 2,550 mm, loading space length: 6,200 mm, loading space width: 2,550 mm, loading space height: 1,080 mm, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, power assisted steering, spoiler, traction control, trailer coupling, = Additional Options and Accessories =
- Roof spoiler
- Power steering
- Remote central locking
- Refrigerator
- Air suspension
- Tow hitch
- Power Take-Off (PTO)
- Radio
- Disc brakes
- Sun visor
- Spotlights
- Lane keeping assist
- Auxiliary heater
- Toolbox
= Notes =
Volvo FH 460 8x2.
490 cm wheelbase.
2 x 10-ton front axle.
Dynamic steering.
230V inverter.
Kedpfxjzktp Do Abpond
Tractor-trailer combination.
Detachable fifth wheel / 3 positions.
Coupling height: 125 cm.
Short loading floor: 470 cm.
Long loading floor: 620 cm.
Loading floor height: 108 cm.
2 x 40 mm king pin.
Twist locks.
Side boards.
Stainless steel boxes.
Chain boxes between the axles.
Ropes.
Tie-down eyes in the side rails.
Work lights.
24V NATO plug.
= Further Information =
Technical Information
Number of cylinders: 6
GVWR: 39,000 kg
Axle Configuration
Brakes: Disc brakes
Suspension: Air suspension
Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%
Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%
Rear axle 1: Tire size: 295/60R22.5; Dual tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%
Rear axle 2: Tire size: 355/50R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%
Functional
Crane: Palfinger
Maintenance
MOT (Technical Inspection): Valid until 07/2027
Financial Information
Price: On request
Identification
Model number: FH 460 8x2 PALFINGER PK100002 /
= Company Information =
ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the texts provided.
Success:
Your message has been sent.
Listing
Valga
17,144 km
Industrial Steam Tumble Dryers 2 pcs
TUPESASC 125 V Steam Dryers
Call
Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004)
Two High-Capacity Steam-Heated Tilting Drum Dryers
An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain.
These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants.
Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line.
The machines are sold together as one lot.
Unit K550 is operational.
Unit K551 requires radiator replacement
Technical Specifications
• Manufacturer: TUPESA Maquinaria Textil
• Model: SC 125 V
• Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer
• Quantity: 2 Machines
• Year of Manufacture: 2004
• Manufacturing Date: 17.12.2004
• Country of Manufacture: Spain
• Power Supply: 380 V, 3-Phase, 50 Hz
• Heating System: External Steam Supply
• Variable Speed Drive: Danfoss VLT 2800 Inverter
• Drum Type: Hydraulic Tilting Drum
Machine Details
Unit K550
Knodpfx Ajzkv R Dobpjd
• Internal Reference: K550
• Serial Number: 3881
• Operational
Unit K551
• Internal Reference: K551
• Serial Number: 3690
• Requires inspection / suitable for spare parts or refurbishment
Key Features
• Two industrial steam-heated tumble dryers
• Large-capacity tilting drum design
• Hydraulic drum tilting for ergonomic loading and unloading
• Steam-heated drying system
• Danfoss variable-speed inverter drive
• Industrial electrical control panel
• Heavy-duty construction for continuous production
• Designed for large-scale laundry and garment processing
Includes
• 2 × TUPESA SC 125 V tumble dryers
• Danfoss inverter drives
• Electrical control cabinets
• Main drive motors
• Steam connection valves
• Exhaust fan assemblies
• Industrial support frames
Applications
• Industrial laundry operations
• Garment manufacturing
• Denim production
• Textile processing
• Garment finishing
• Commercial drying facilities
• Heavy textile processing
Condition
• Sold as one lot consisting of two machines
• One machine fully operational
• Second machine requires approx.. 1000 euro radiator replacement.
• Previously used in professional industrial production
• Both machines are externally complete
• Good overall industrial condition
• Normal cosmetic wear consistent with factory use
• Available for inspection before dismantling
Location
Valga, Estonia
Dismantling & Transport
Buyer is responsible for dismantling, loading, transportation, and all related costs.
Professional dismantling and lifting equipment are recommended due to the size and weight of the machines.
Sales Terms
Sold as-is, where-is, without warranty.
Part of the MASI JEANS factory liquidation.
The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.
We make it easier for you to find: "solar inverter"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Solar Inverter (1,979)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month






















































































































































































































































































