Used Smoking Sticks for sale (1,246)

Condition: good (used), Year of construction: 2006, Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Gsdpfx Akshgkdqj Uokb Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Godpfegbug Nex Ak Uskb Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: good (used), Moving bezel, bezel, setting stick, lynette -Bezel: riding along -Peak height: 100 mm -Edition: Brass -Technical drawing: see photos Godpfx Asiw Eqrok Uokb -Dimensions: 180/30/H245 mm -Weight: 2.5 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Gkedpfx Aksd Nt N Hs Ueb Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Gkodpju Ekbnsfx Ak Usb Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: used, mileage: 289,000 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C front axle 7.5 t, A1Z front axle in offset design, A2E rear axle with 440 crown wheel, hypoid, 13.0 t, B1B electronic braking system with ABS and ASR, B1F heating, electronic air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5J brake and electrical connections, low, C0G rear frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D access behind cab, left, C5P frame bolted, C6G steering Servotwin, C6I servo pump, regulated, C6Q stabilizer front axle, C7F front underrun protection (ECE), aluminium, C7T integral rear, C8C rear axle fenders, 2500 mm vehicle width, C8H 3-piece fenders with EG splash guard, C8I splash guard (EG) front, C8Y underbody cladding, aerodynamic, D0A leather steering wheel, D0S compressed air connection in cab, D0U smoke detector in cab, D1C driver suspension seat, comfort, D1N co-driver functional seat, D2N seatback release, driver's seat, D3A comfort bed, upper, wide, adjustable, D3B comfort bed, lower, D3M PremiumComfort mattress, lower, D3N PremiumComfort mattress, upper, D3Q seat cover, velour, driver's seat, D3T seat cover, velour, co-driver and middle seat, D4S sun blind, one-piece, electric, windscreen, D4T curtain, across bed(s), D4Z sun blind, side, driver and co-driver side, D5Z carpet on engine tunnel, D6C electric stationary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater. You can reach us by phone Monday to Friday until 20:00 and Saturday until 16:00! More details: Leasing/financing and trade-in possible! Errors and prior sale excepted! All details without guarantee ... more on our homepage Gjdsu Nnf Sopfx Ak Uekb

Condition: good (used), Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg Gkedpfx Aoh Tr E Hek Uob

Condition: good (used), Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe type MV SKV/2-1 -Max. passage: Ø 350 mm Gedpfx Aksh Uhkzo Uskb -Peak height: 460 mm -Technical drawing: see photos -Dimensions: 820/270/H895 mm -Weight: 160 kg

Condition: used, mileage: 379,976 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C Front axle 7.5 t, A1Z Front axle, curved design, A2E Rear axle, bevel gear 440, hypoid, 13 t, B1B Electronic braking system with ABS and ASR, B1F Heater, electronic compressed air supply unit, B2A Disc brakes on front and rear axles, B4A Condensate monitoring for compressed air system, B4M Compressed air tank, steel, B5J Brake and electrical connections, low, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C5D Access, behind cab, left, C5P Frame, bolted, C6G Steering, power steering twin, C6I Steering assist pump, regulated, C6Q Stabilizer, front axle, C7F Front underrun protection (ECE), aluminum, C7T Integral rear, C8C Rear axle mudguards, 2500 mm vehicle width, C8H Mudguards, 3-part, with EC splash protection, C8I Splash protection (EC), front, C8Y Underbody panel, aerodynamic, D0A Leather steering wheel, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D1N Co-driver's functional seat, D2N Seat back, release, driver's seat, D3A Comfort bed, upper, wide, adjustable, D3B Comfort bed, lower, D3M Mattress, PremiumComfort, lower, D3N Mattress, PremiumComfort, upper, D3Q Seat cover, velour, driver's seat, D3T Seat cover, velour, co-driver's seat, center seat, D4S Sunblind, 1-piece, electric, windshield, D4T Curtain, transverse in front of bed(s), D4Z Sunblind, side, driver and co-driver side, D5Z Carpet, engine tunnel, D6C Electric auxiliary heater, D6I Waste heat recovery, D6M Hot water auxiliary heating, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Gkedpfjik D Sdsx Ak Ueb Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage.

Condition: used, mileage: 550,000 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C Front axle 7.5 t, A1Z Front axle, curved design, A2E Rear axle, bevel gear 440, hypoid, 13 t, B1B Electronic braking system with ABS and ASR, B1F Heater, electronic compressed air supply unit, B2A Disc brakes on front and rear axles, B4A Condensate monitoring for compressed air system, B4M Compressed air tank, steel, B5J Brake and electrical connections, low, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C5D Access, behind cab, left, C5P Frame, bolted, C6G Steering, power steering twin, C6I Steering assist pump, regulated, C6Q Stabilizer, front axle, C7F Front underrun protection (ECE), aluminum, C7T Integral rear, C8C Rear axle mudguards, 2500 mm vehicle width, C8H Mudguards, 3-part, with EC splash protection, C8I Splash protection (EC), front, C8Y Underbody panel, aerodynamic, D0A Leather steering wheel, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D1N Co-driver's functional seat, D2N Seat back, release, driver's seat, D3A Comfort bed, upper, wide, adjustable, D3B Comfort bed, lower, D3M Mattress, PremiumComfort, lower, D3N Mattress, PremiumComfort, upper, D3Q Seat cover, velour, driver's seat, D3T Seat cover, velour, co-driver's seat, center seat, D4S Sunblind, 1-piece, electric, windshield, D4T Curtain, transverse in front of bed(s), D4Z Sunblind, side, driver and co-driver side, D5Z Carpet, engine tunnel, D6C Electric auxiliary heater, D6I Waste heat recovery, D6M Hot water auxiliary heating, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage. Gkodpjik D Spofx Ak Usb

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Gkjdpfx Akei Hn Sro Usb Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW Godpfed Ep Upsx Ak Ujkb -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg

Condition: good (used), Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 80 mm Gkodob A Sg Ijpfx Ak Usb -Edition: Brass -Hole spacing: 210 mm -Peak height: 135 mm -Weight: 8 kg

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Gedpfx Ajd Rcigjk Ujkb Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: H_7348, warranty duration: 6 months, total length: 2,200 mm, year of last overhaul: 2026, total width: 190 mm, overall weight: 1,200 kg, funnel diameter: 190 mm, Used intermediate proofer BIP 72E WP Haton The BIP 72 E intermediate proofer was specifically designed for automated dough fermentation between rounding and dividing. Precise control manages the introduction of dough pieces into the trays. Subsequently, the dough pieces pass row by row through the tipping stations, according to the set fermentation time. The intermediate proofer operates in timed or continuous mode. Advantages of the device: Frame made of closed profiles, Teflon-coated tipping station to prevent dough pieces from sticking, Cradles made of stainless steel, Washable, easily removable, and air-permeable trays, Round trays for round dough pieces, UV lamps to prevent the formation of mold and fungi, Uniform climate inside the proofer chamber, Number of rows – 8, Number of trays: net – 360, gross – 416, Capacity – inlet on a photocell, Flat conveyor belt for up to 3600 pieces/hour, Single inlet with a photodiode, Gkjdpfozw Ed Tex Ak Ueb Diameter of polyethylene trays Ø 190 mm, Equipped with UV lamps, windows made of organic glass.

Condition: used, mileage: 109,050 km, power: 120 kW (163.15 HP), first registration: 09/2020, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,367 mm, total width: 2,020 mm, total height: 2,703 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 0736X ----Why Autonext? Over 400 cars & commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing & trade-in options available. Complete vehicle selection available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Watch the YouTube video to see the vehicle fully from the outside and inside: ?v=09WrvqR0zeQ Gksdozqil Ujpfx Ak Ujb Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, only at Mercedes Benz New front brakes Body type: Maxi extra-long wheelbase van "Sortimo" workshop with shelving system Tow hitch Rear view camera Parking assist front and rear Cruise control Auxiliary heater Air conditioning (Tempmatik) Anti-theft alarm, interior protection, towing protection and battery horn Parametric special module Tachograph ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Parking package with rear view camera * Rear view camera * 2nd battery (auxiliary battery) interior * Airbag, passenger side * Tow hitch: fixed ball head * Trailer socket, 13-pin * Passenger-optimized center console (without storage compartment, center console right) * DAB tuner (digital radio reception) * Anti-theft alarm, interior protection, towing protection and battery horn * Entry handle on rear pillar, rear right * Entry lights * Tachograph operation at the front, under the headliner * Suspension: stabilization level II * Cruise control * Wooden floor in the cargo area * Connector strip for electrical connections (driver's seat box) * Air conditioning (Tempmatik) * Cable duct at the rear portal * Cable duct on the side panel * Parametric special module * Cross member with integrated step * Smoker's package * Spare wheel in driving condition * Spare wheel holder under the frame end including jack * Mud flaps front * Safety belt system with warning system (passenger side) * Seats in the cab: double passenger seat * Seats in the cab: driver's seat comfort * Seats in the cab: driver's seat with lumbar support * Separating relay for additional battery * Paneling in the cargo/loading area: wood, high (up to the roof) * Tie-down rails in the cargo area - side panel on railing * Tie-down rails in the cargo area - side panel on roof frame * Fleece battery 92 Ah * Auxiliary heater (hot water) Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, adaptive brake light, airbag driver side, hill-start assist, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, display for washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, headlining in the cab, automatic activation of driving lights, entry handle for sliding door at cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: active brake assist, driving assistance system: side wind assist, driving assistance system: lane keeping assist.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) Gksdpfx Aoznmfaek Ujb *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Condition: used, mileage: 239,050 km, power: 130 kW (176.75 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 9901X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available on autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to see the vehicle completely from the outside and inside: Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Volkswagen New front and rear brakes Like-new all-season tires on the front Body style: Maxi extra-long Automatic transmission Number of seats: 5 Adapted for disabled passengers Wheelchair lift "AMF Bruns" Max. 400 kg Wheelchair securing system Wheelchair space Electric step Rail system 2 sliding doors (on both sides) LED headlights Navigation system Rear view camera Parking assistance front and rear Climatic air conditioning Tinted windows Upon request, we can offer you an optional trailer coupling for only 599,- Euro, and, if possible, an increase in the trailer load to up to 3.5 tons. ---- Special equipment: * Audio-navigation system Discover Media (touchscreen color display) * Voice control system * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Equipment package: Light + Sight * Driving assistance system: High beam assistant (Light Assist) * Rain sensor * Automatic headlight activation * Light assistant (Coming Home, Leaving Home) * Driving assistance system: Parking assistance front and rear with active flank protection * Driving assistance system: Parking assistance front and rear * Window package * Window in the cargo/passenger compartment: - fixed, front left * Window in the cargo/passenger compartment: - fixed, front right * Window in the cargo/passenger compartment: - fixed, center left * Window in the cargo/passenger compartment: - fixed, center right * Window in the cargo/passenger compartment: - fixed, rear left * Window in the cargo/passenger compartment: - fixed, rear right * Rear tailgate with glazing * Interior mirror, dimmable * Climatronic automatic air conditioning (driver's cab) with 2nd heat exchanger and 2nd evaporator * Storage package * Storage compartments: DIN compartment in the front under the headliner * Interior lights in the driver's cab: reading light in the front * Rain sensor * Automatic headlight activation * Light assistant (Coming Home, Leaving Home) * LED headlights * LED daytime running lights * Headlight cleaning system * Display for windshield washer fluid level * Mud flaps front and rear * Mud flap front * Mud flap rear * Additional heat exchanger and evaporator * Additional heat exchanger * Airbag driver/front passenger side, front passenger airbag can be switched off Gsdjzpc H Ajpfx Ak Uokb * Exterior mirrors, electrically adjustable and heated * Rear turn signals (roof) * Roof lining * Vehicle without cargo area partition * Vehicle without lashing points * Paint: Metallic paint * Steering wheel with multi-function buttons * Rear view camera * Heated windshield washer nozzles * Sliding door, cargo/passenger compartment, left * Seat cover / upholstery: Durable seat covers * Seats in the driver's cab: Driver's seat Comfort Plus * Reinforced door hinges, front left * Trim in the cargo/passenger compartment: Plastic, halfway up * Auxiliary heater

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM Gsdpezv S H Ssfx Ak Uekb MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,200 kg, total width: 1,200 mm, total height: 1,900 mm, product length (max.): 2,800 mm, number of axes: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: Longitudinal milling • Capabilities: • Max milling length: 1300 mm • Max milling diameter: 300 mm • Max recommended workpiece size: 1300 x 150 mm • Cutter shaft speed: 5300 rpm • Operation/features: Low-vibration, smooth running; high dimensional accuracy and clean surface finish • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-contoured parts • Material suitability: Hardwood, softwood, multiplex, MDF, selected plastics (with suitable cutters) • Typical applications: • Tool handles, hammer/axe/garden tool handles, walking stick handles • Gun stocks, pistol grips, bow risers • Furniture parts: armrests, back rails, handles, decorative moldings, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements • Foundry patterns, gauges, templates, fixture components • Knife and tool handles, pestles, kitchen utensil handles • Certification/conformity: CE marked; EC declaration of conformity available • Test run: Possible under power by appointment • Included: Machine as shown Additional equipment Gkodpfx Aozugubjk Ueb • Optional: Additional milling cutters available • Optional: Additional templates (only if shown or explicitly mentioned)

Condition: excellent (used), power: 159 kW (216.18 HP), overall weight: 30,300 kg, chain condition: 50 %, Year of construction: 2013, operating hours: 13,378 h, Equipment: air conditioning, Komatsu PC290NLC-10 Year: 2013 Operation hours: 13.378 hrs. ROPS Protection Cab Airco Back drive camera Gksdpfxezt Rfbs Ak Ueb Central lubrication Monoboom Stick: 3.25 m. All hydr. lines (hammer-, gripper-, scissor line) OQ70/55 quick coupler 1x bucket – 1.40m width U/C: approx. 50% good trackshoes: 600 millimeter width engine with 159kW CE / EPA Transport: 10 x 3 x 3.5m Operation weight: 30.3 to

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual. Gedpfszt H Nvox Ak Ujkb

Condition: excellent (used), power: 43 kW (58.46 HP), chain condition: 60 %, Year of construction: 2011, operating hours: 8,204 h, Equipment: air conditioning, rubber tracks, CATERPILLAR 308D year 2011 operation hours: 8.204 hrs. Gksdpfozrt Amex Ak Uob ROPS Airco Radio Monoboom Stick: 2,20 meter All hydr. lines (hammer-, gripper-, scissor-) quick coupler OQ45 1x bucket with 750mm width U/C: approx 60% good trackshoes: 450 mm width blade support Misubishi engine with 43 kW CE Operation weight: 8,5 to.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives Gsdpfjzx Ri Dsx Ak Uekb • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Godpfx Akozdiz No Uokb Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.