Used Slots for sale (2,683)

Condition: new, Year of construction: 2025, - FANUC 0i-MF Plus "NEW" - 10.4" LCD color screen - Diagonal, MANUAL GUIDE i Machine Table - Table size: 1,120 x 560 mm - Load capacity: 1,000 kg - T-slot width: 18 mm - Number of T-slots: 5 - T-slot spacing: 100 mm - Table height from floor: 900 mm Travel paths and distances - X / Y / Z travel paths: 1,050 / 560 / 560 mm - Spindle nose to table surface: 150 - 710 mm - Spindle center to column: 600 mm Linear axis guides & speeds - Flat guides in X / Y / Z axes - Rapid traverse X/Y/Z: 36/36/34 m/min - Milling feed: 1 – 10,000 mm/min - Minimum increment: 0.001 mm Tool magazine (CAM type) / tool changer - Tool holder: BBT-50 (optional SK-50) Hsdpfxjwkf Izs Ah Nefb - Number of magazine positions: 24 - System: random - Max. tool diameter: Ø 105 mm - Max. tool diameter with free adjacent positions: Ø200 mm - Max. tool length: 300 mm - Max. tool weight: 15 kg Spindle - Spindle taper: BTT-50 BIG-PLUS® (optional SK-50) - Drive type: 2-stage gearbox - Speed level 1: 80 - 1,500 rpm - Speed level 2: 1,500 - 8,000 rpm - Drive power (30 min/continuous): 11 / 7.5 kW - Torque (30 min/continuous): 236/161 Nm up to 369 rpm - Lubrication: Grease - Inner bearing diameter: Ø80 mm - Spindle cooling: Oil Coolant, chip, and compressed air management - Coolant system including 400-liter tank and pumps - External coolant around the spindle - Internal cooling 50 bar - Bed flushing, 0.85 kW / 130 l/min., (optional) - Chip spirals on the right and left side of the machine bed Chips are conveyed to the front of the machine - Chip spiral (optional: belt or scraper belt chip conveyor) Chips are conveyed to the left side of the machine - Compressed air nozzle on the spindle (M32/M33) - Compressed air through the spindle (M38/M39), (Optional) - Compressed air and coolant gun Other Equipment - Pivoting control panel - Electronic handwheel (wired) - Central oil/air lubrication system - Spindle oil cooler - Fully enclosed housing - Work light - Heat exchanger on the control cabinet - Auto-Power OFF function - Hand tool set - Signal light - Transformer 400 VAC, 50 Hz - CE Declaration of Conformity

Condition: ready for operation (used), Year of construction: 2014, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. Hjdpox D E Eqjfx Ah Njfb • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm Hodpfx Aox Uz Apeh Nefb spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Hfodpewhm Sijfx Ah Nob Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Year of construction: 2013, condition: used, This listing is for a SCC 61 combi-steamer from premium manufacturer Rational, in electric configuration. The combi-steamer comes equipped with a hanging rack featuring 6 slots. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. It is offered with a 6-month warranty covering all electrical components. The base stand shown in the pictures is not included in the offer but can be purchased optionally. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging contact with a certified Rational service provider. Looking for a specific Rational appliance? Contact us – we have access to an extensive assortment of used and new equipment. We are pleased to advise on all model types, including SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service includes: • 6-month warranty on electrical components, limited to replacement of defective parts, excluding installation/removal costs • High-quality branded units at fair prices • Professional overhaul/inspection & expert cleaning • Inspected & fully functional – or your money back • Flexible shipping or self-collection options • Competent advice – before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Safety testing in accordance with DGUV V3 This combi-steamer accommodates 6 x 1/1 GN trays. In automatic mode, the unit independently recognizes the optimal cooking process, portion size, load volume, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: • W x D x H: approx. 847 x 776 x 782 mm • Power connection: V: 400 / kW: 11.0 / Hz: 50/60 • Capacity: 6 x 1/1 GN • Weight: approx. 103 kg • Serial number: E61SH13062355386 • Year of manufacture: 2013 Condition: used, fully overhauled, fully functional Further features: • With CareControl – self-cleaning system • 3 operating modes in combi-steamer mode: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) • Core temperature probe Hfsdpfjx Uzciox Ah Njb • Retractable hand shower • 8.5-inch color display with touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning – including overnight • Adjustable steam level in 3 stages – from 30°C to 260°C • 5 programmable proofing stages • USB interface • Seamless, hygienic cooking chamber with rounded corners • Halogen chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, need advice, or want to view something on site? You can reach us by telephone during our business hours: Monday to Friday, 9:00 – 13:00 and 14:00 – 17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Condition: new, The KB 32 SF from KNUTH is a robust column drilling machine that is essential for any workshop or industrial application. Designed with a modern aesthetic, this machine features a heavy, precision-ground work table equipped with diagonal T-slots for optimal functionality. Its smooth height adjustment mechanism allows for ease of use, even when handling heavy loads. The KB 32 SF boasts a powerful motor, a reliable belt drive, and an integrated LED work lamp, ensuring superior performance and visibility during operations. With a drilling capacity of 32 mm and a spindle mount of 3 MT, this machine is built to meet the rigorous demands of various drilling tasks. Additional features include a forward and reverse function, automatic direction reversal for thread cutting, and a sturdy base plate with parallel T-slots. Included in the standard equipment are a coolant system, drill chuck, tool-holder bits, a drill press vise, and necessary operating tools. Elevate your drilling capabilities with the KB 32 SF, a key addition to your column drilling machines lineup. Request a quote today to enhance your efficiency and precision in drilling operations. Hfsdpfxjuyiitj Ah Nsb

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Hfsdeifn N Nepfx Ah Neb Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: MAKINO, controller model: Pro5, table load: 1,200 kg, tool weight: 20,000 g, number of axes: 4, This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Additional equipment • Spindle cooling • Tank system with Knoll compact band filter, 3200 liters • Coolant supply through the spindle • Oil mist extraction • Scraper belt conveyor • Conversion kit for stand-alone operation (currently used as a system machine) Machine Benefits Technical Machine Benefits • Transverse movement (x-axis) of the column: 900 mm • Height adjustment (y-axis) of the spindle unit: 800 mm • Longitudinal movement (z-axis) of the table: 1020 mm • Permissible swivel diameter in the working area: 1000 mm • Max. Swiveling height from pallet surface: 1300 mm • Pallet size: 630 x 630 mm • Pallet – nc – rotary table with 4th nc axis • Input resolution: 0. 001° • Positioning accuracy: ± 3 arcseconds • Tool magazine with 242 storage slots Extra Information Power Supply 400 V, 3-phase AC, 50 Hz Power rating: 72 kVA Hsdpfxsx D Ngxo Ah Njfb Control System Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection Adaptive feed control Compressed air through the spindle Knoll compact band filter, 3200 liters Magnetic separator Double-switching filter for IKZ Coolant supply through the spindle Compressed air through the spindle Oil mist extraction Scraper belt conveyor Control System: Makino Pro5 Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection (parallel to main operation) Adaptive feed control Conversion Kit for Stand-Alone Operation (Currently used as a system machine (FFS/FMS)) Pallet changer with placement of 2 pallets in alternating cycles onto a station positioned outside the working area Pallet holder rotatable, indexed at 90° intervals, 0-position electronically monitored Coding for automatic program call when inserting the pallet Pallet storage station secured with a protective device and electrical interlock

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar Hfedpfx Ahex Uz Avo Nsb mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Hfsdpfx Aexxyd Doh Nob Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Operating manuals

Condition: used, Year of construction: 2002, gebraucht 2002 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm 2000 mm 9800 kg Swing cut construction Hjdsx Urrhjpfx Ah Nefb NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Hjdpfxexcqz Io Ah Nofb Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer Hodjwxdpgepfx Ah Nsfb - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 640 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, This 3-axis ABERLINK Axiom Too CNC CMM machine was manufactured in 2016. It features a Renishaw TP8 measuring head with indexable joint and multiple ruby ball tips, ensuring precise measurements. The machine includes Aberlink3D software and a control system with a dual-core processor for efficient data handling. Options like automatic temperature compensation and a flexible fastener set enhance its functionality. If you're considering expanding your measurement capabilities, buy this ABERLINK Axiom Too CNC CMM machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Automatic ambient temperature compensation • The machine is in operational condition, in storage • Last calibration done in 2022 with certification Hfedpfxex Uzqgs Ah Neb • A separate data transfer card + connected to the computer intermediate cable for the transfer and reception of x, y, z axis position data • Renishaw rtp 20 – mcr20, rtp20 measuring head with two tp 20 modules and mcr20 with a tool changing stand with six tool slots. • Fixlogix flexible fastener set, the fastener set together with the 450 x 450mm plate offer a flexible, fast and reliable attachment to parts in the machine's measuring range. Extra Information Machine still under power

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC Hfjdpfxowhqz Uo Ah Njb dimensions ca. 3000 x 2500 x 2500 mm

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: Hodpfx Asx Hhcteh Nsfb - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) Hfsdpex Urqwefx Ah Nsb OPTION: Pneumatic centering attachement

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14H7 mm Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Hodpfex Auvvox Ah Nofb Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Including tool holders and zero point clamping system.

Condition: used, Year of construction: 1964, serial number 23046 stroke 320 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Hfodpfx Ahjfgpdre Njb +++++

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks Hjdpjxuh Rdofx Ah Nefb - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm Hsdpjx Urqqsfx Ah Nsfb M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 400 U With Heidenhain TNC 640 CNC Control Year of manufacture: 09/2016 Travel distances: X 850 Y 700 Z 500 mm Spindle speed range: 20 – 18,000 rpm, stepless Including the following accessories: Hjdpfx Ahew Ewmfo Njfb - NC rotary swivel table Ø 650 mm x 540 mm (T-slots for SRT) - Vertical tool changer with 38 magazine slots (HSK 63) - Additional magazine with 50 magazine positions (ZM 50) - Through-spindle coolant supply 40 bar with paper band filter - Scale air purging - Fine filter for through-spindle coolant supply 40 bar - Scraper belt conveyor - Chip cart 450 liters - Coolant unit - Air blow-off unit - Spindle center compressed air - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation - Electronic handwheel - BLUM tool breakage/control & measurement A2 - Heidenhain 3D touch probe - Chip rinsing pistol - Oil mist extraction unit - Control cabinet cooling device (RITTAL) - 4 adjustable machine feet - Operating manuals

Condition: new, Year of construction: 2025, neu 2025 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm 1000 mm 700 mm 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement Hfedpfx Asx Urqkjh Neb

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Hfodpfx Asviq U Eeh Njb Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm Hedpfx Aox Urpmeh Nofb The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement