Used Slot And Pin Machine for sale (72,287)

Condition: used, Year of construction: 1995, SCHÜTTE SF 26S DNT Maximum bar diameter, round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 – 290 mm Longitudinal travel of slides (total / working): 125 / 98 mm Cross slide travel (total / working): Top: 40 / 25 mm Middle: 40 / 25 mm Bottom: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 seconds Creeping speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W, approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: Gedpfoyxb Ndjx Acwebk SCHÜTTE SF 26S DNT machine Bar feeder

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Tilting spindle Gsdpfxsyy I R Re Acwobk With table extension on both sides

Condition: used, Year of construction: 2000, INDEX MS42C Maximum bar diameter: 42 mm Spindle pitch circle diameter: 320 mm Main spindle: Power clamping with INDEX spring-loaded hollow clamping cylinder and collet Maximum clamping stroke: 4 mm Clamping force: 26 kN Main spindle drive: Rated power: 5 kW Rated speed: 1,500 rpm Rated torque: 32 Nm Maximum speed: 5,000 rpm Synchronous spindle and rotary tool holder: Rated power: 5.3 kW Rated speed: 1,500 rpm Rated torque: 34 Nm Maximum speed: 5,000 rpm Cross slides: Max. number: 10 Travel (X): 70 mm Travel (Z): 140 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Max. feed force +Z: 11.4 kN Godpfeymc S Uox Acwebk Max. feed force −Z: 7.9 kN Rapid traverse: 15 m/min Longitudinal spindles: Quantity: 6 Stroke (Z): 240 mm Max. feed force +Z: 15.1 kN Max. feed force −Z: 11.6 kN Rapid traverse: 15 m/min Longitudinal slide units: Max. number: 6 Travel (X): 70 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Rapid traverse: 15 m/min Synchronous spindle: Chuck system: spring-loaded clamping cylinder Maximum clamping diameter: 42 mm Chuck outside diameter: 112 mm Jaw stroke: 1 mm Max. total clamping force: 13 kN Weight: approx. 11,000 kg Scope of delivery: KNOLL KTS 32-48-T hydraulic unit CUCCHI PLURIMANDRINO bar feeder, year 2000 Workshop cabinet with machine accessories KNOLL VRF 500 KNOLL 400 S-1/250 chip conveyor

Condition: used, Year of construction: 1994, operating hours: 62,283 h, bar diameter (max.): 26 mm, spindle bore: 230 mm, total width: 1,500 mm, total length: 7,000 mm, total height: 2,000 mm, INDEX MS 25E Maximum bar diameter round / square: 26 / 18 mm Spindle circle diameter: 230 mm Max. bar length: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Gbedeymdchspfx Acwok Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Voltage: 400 V / 50 Hz Operating hours: 62,283 h Working hours: 4,916 h Dimensions (incl. bar guide): approx. L x W x H 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: INDEX MS 25E machine

Condition: used, Year of construction: 2007, operating hours: 26,721 h, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, total width: 1,800 mm, total length: 3,200 mm, total height: 2,850 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 12 mm, travel distance Z-axis: 85 mm, rotational speed (min.): 10,000 rpm, overall weight: 6,500 kg, INDEX MS 22C Work Spindles: Gedpfx Acjymaw Iowjbk Quantity: 6 Maximum bar diameter: 22 mm Spindle pitch circle diameter: 230 mm X / Z travel: 62 / 85 mm Rapid traverse: 15 m/min Synchronous hollow spindle drives: Quantity: 6 Maximum speed: 10,000 rpm Nominal speed: 8,300 rpm Power: 15 kW at 18 Nm Chuck diameter: 110 mm Rotating synchronous spindles: Quantity: 2 Z stroke: 120 mm Feed force: 2.5 kN Rapid traverse: 15 m/min Rotational angle: 132° Counter spindle: Maximum speed: 10,000 rpm Nominal speed: 8,000 rpm Power: 9.2 / 12 / 14 kW at 11 Nm Tool carriers: Maximum quantity: 11 X / Y / Z travel: 62 / ±12 / 85 mm CNC control: C 200-4D (Siemens Sinumerik 840D) Dimensions (approx. L x W x H): 3.2 x 1.8 x 2.85 m Weight: approx. 6.5 t Operating hours: 61,997 h Machining hours: 42,235 h Scope of supply: INDEX bar feeder Bar feeder IEMCA SIR MS22 P, year 2008 Coolant unit with belt filter Chip conveyor KNOLL 400 S-1/290 Coolant filtration unit KNOLL FKA/1780 RSF 100 Workshop cabinet with machine accessories

Condition: used, Year of construction: 2002, Technical Details: SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Gbjdpfx Aceymdd Sjwok Spindle speeds (infinitely variable): 800 – 10,000 rpm Main cycle times (infinitely variable): min./max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (including bar guide): approx. L x W approx. 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: - Bar feeder Pra 52 P IEMCA - RUEZ KF0WW2/312 DAS, year 2002

Condition: excellent (used), Year of construction: 2005, Used machine in very good condition. Gbodpfxsylp Ums Acwjk Can be inspected under power. Location: Hungary We also offer spare parts for UW1E machine: Grinding spindle HSK50 belt drive for Saacke UW1E New ball screws Frequency converter NUM IO modules Servo motors New coolant valves etc. Please feel free to inquire.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3486579, Offer 26048 Single-spindle Copy Milling Machine for 3-Sided Processing Technical Data: - 3-sided machining in a single clamping for lock and euro-profile cylinder (PZ) cutouts, - e.g. milling in aluminium / plastic / steel profiles - Operated via two-hand lever Gbjdpfxoyymgke Acwjk - Material clamping by pneumatic clamping cylinder - Manual profile bar rotation device for 3-sided processing - Working range - x (crosswise) 250 mm - - y (longitudinal) 90 mm (depending on position) - - z (vertical) 120 mm (depending on position) - Max. profile height, depending on position: approx. 120 mm - Max. profile depth: 100 mm - Spindle speed: approx. 6,000 + 12,000 rpm - Pneumatic connection: 8 bar - Drive: 400 V / 1.5 kW - Required space: approx. W 650 x H 1550 x D 850 mm - Weight: approx. 340 kg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, input voltage: 230 V, overall weight: 135 kg, input frequency: 50 Hz, power: 0.74 kW (1.01 HP), extraction nozzle diameter: 100 mm, grinding height: 160 mm, rotational speed (max.): 1,400 rpm, The used JET spindle sander JOVS-10 is a compact and versatile sanding machine for precise sanding of internal radii, contours, and edges. It is ideally suited for workshops and craft businesses, offering robust construction, easy operation, and reliable performance. Machine Equipment Spindle sanding unit Various sanding sleeves and spindle diameters Stable work table Gedpfxeu E Tb Ro Acwebk Easy tool changes Compact design Dust extraction connection

Condition: good (used), Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Gsdpfx Ajywm A Hscwebk Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s Gbsdpfjyybcaex Acwsk MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: new, Year of construction: 2024, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Gjdor D Ntfspfx Acwjbk YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Gbjdpocuwptofx Acwek • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: AS141109, number of spindles: 6, spindle speed (max.): 6,000 rpm, bar passage: 14 mm, bar diameter (max.): 14 mm, total width: 2,150 mm, total length: 1,466 mm, total height: 820 mm, turning length: 30 mm, Cam-controlled multi-spindle automatic lathe TORNOS AS14 – completely overhauled in 2016 with a new Knoll chip conveyor! Retrofit year: 2017 Chip conveyor: Knoll, 2018 Machine counter: 1,852,409 parts produced (as of 19.12.25) Number of spindles: 6 Control: Cam-controlled Max. turning diameter: Ø14 mm Gedjyxnrfspfx Acwjbk Max. turning length: 30 mm Spindle speed: 6,000 rpm Spindle power: 7.5 kW Weight: 2,200 kg Dimensions (W x D x H): 2150 x 820 x 1466 mm Transport, collection and dismantling are to be organized by the buyer.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AS14824, number of spindles: 6, spindle speed (max.): 6,000 rpm, bar passage: 14 mm, bar diameter (max.): 14 mm, total width: 2,150 mm, total length: 1,466 mm, total height: 820 mm, turning length: 30 mm, Cam-controlled multi-spindle automatic lathe TORNOS AS14 – fully overhauled in 2016! Gsdpfxoyxnp Dj Acwsbk Retrofit year: 2016 Machine counter: 1,957,690 produced parts (as of 19.12.25) Number of spindles: 6 Control: cam-controlled Max. turning diameter: Ø14 mm Max. turning length: 30 mm Spindle speed: 6000 rpm Spindle power: 7.5 kW Weight: 2200kg Dimensions (W x D x H): 2150 x 820 x 1466 mm Transport, collection, and disassembly must be organized by the buyer.

Condition: excellent (used), Year of construction: 2019, operating hours: 16,917 h, functionality: fully functional, machine/vehicle number: 11010081, bar diameter (max.): 22 mm, turning diameter: 22 mm, bar length: 3,000 mm, Equipment: documentation/manual, Year of manufacture: 2019 Operating hours: 16,917 h Control unit: C200 Solution Line, control panel with flat-screen monitor (47 cm diagonal) Maximum: 10 channels / 31 axes Based on SINUMERIK 840D sl Equipment: NC option synchronous spindle / polygon turning incl. electronic shaft Slide unit 1.1 (X-axis and Z-axis CNC-controlled) Slide unit 2.2 (X-axis and Z-axis CNC-controlled) Slide unit 3.1 (X-axis and Z-axis CNC-controlled) Slide unit 4.2 (X-axis and Z-axis CNC-controlled) Slide unit 5.1 (X-axis and Z-axis CNC-controlled) Slide unit 6.1 (Z-axis CNC-controlled) – synchronisation module Slide unit 6.2 (X-axis and Z-axis CNC-controlled) – back-working unit at position 6.2 Main spindle max. clamping diameter 22 mm Gbjdpfx Aoyxnnascwsk Parts discharge via chute from spindle position 6 to the right Conveyor belt outside the machine including coolant return Bar feeder: IEMCA SIR MS22, integrated loading magazine Flat loader, 50 Hz D9-13-19-26 Bar length 3300 mm Material storage 200 mm support surface Additional storage chain for 20 bars Profibus-DP slave interface Cooling unit: Cooling capacity 29 kW at 38°C room temperature Coolant R407c Chip conveyor: Hinged belt chip conveyor, 570 mm discharge height, left discharge, with lift pump for filtration system Chip trolley, fill volume 100 l Fire extinguishing unit: CO2 fire extinguishing system with optical fire detection, CO2 extinguishing tank with control unit Prepared for connection to a central oil mist extraction system Shut-off damper for central oil mist extraction system Electrics: Teleservice via VPN connection Chip breaking cycle "ChipMaster" Transport, dismantling, and collection are to be organized by the buyer.

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles Gjdpjvi I Nmjfx Acwobk - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: excellent (used), 23 spindles left/right spindles Gjdpfeyxc E Tox Acwebk 3 pneumatic clamps spindles span 32mm pedal control CE

Condition: good (used), heads set: right/left/top/top spindles span 32mm motors 1,1kW heads with 5 spindles Godjyxc Dvopfx Acwsbk max heads span 2,5m pneumatic clamps regulation of drilling speed

Condition: excellent (used), two bottom heads one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure Gedjyxcv Sjpfx Acwjbk regulation of span between heads right/left spindles

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Gbedpfx Aoyi A Tdjcwjk

Condition: used, MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, quick-change clamping system, spindle pitch 32mm, vertical or horizontal drilling, 3 pneumatic clamps, Gbedpfx Acjywwwhowjk power supply 380V, The machine is fully functional and ready for work.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR Godeywtxbepfx Acwobk For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Godjytf Ekjpfx Acwebk Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: ready for operation (used), ROTOX copy milling machine, single-spindle Gbedpfx Asyv D Epocwsk