Used Slitting Mashine for sale (239)

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Bedpfx Astn Dija Djdb 20 - 300 x 0,4 - 3,5 mm

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm Bdjdpolilfbsfx Aa Djb No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Bsdognyglepfx Aa Dsdb

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm Bdjdpfx Asgrylmja Dsb speed: max. 150 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Bsdpfogrug Rsx Aa Dodb strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Year of construction: 1972, condition: good (used), strip width: max. 830 mm strip thickness: 0,3 - 4 mm blade shaft Ø: 140 mm No. of slits/material thickness: 25/0,5 mm 4/4 mm Bodpfx Aegrykhea Dedb

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm blade Ø: 350 mm Bdodpfx Aaeg Iihpe Djb

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm speed: max. 150 m/min Bjdpfx Aasd Ha Hmj Dodb

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm speed: max. 150 m/min Bdsdpfx Aegrylqea Dsb

Condition: good (used), Year of construction: 2010, functionality: fully functional, coil weight: 16,000 kg, inner diameter: 640 mm, sheet thickness (max.): 5 mm, working width: 1,500 mm, total length: 24,500 mm, product width (max.): 1,500 mm, Longitudinal Slitting Line YC 180 Technical Specifications: Line length: 24.5 m Line width: 7.8 m Material thickness: 1.5 to 5.0 mm Max. coil diameter: 1.8 m Coil inner diameter: 640 – 800 mm Max. coil width: 1,500 mm Max. coil weight: 16 MT Installed power: 253 kW Line speed: • At 1.5 mm thickness: 110 m/min • At 4.0 mm thickness: 95 m/min Tooling & Accessories: • Slitting knives – total 186 pcs: Set 1 – 10 mm, Ø307: 26 pcs Set 2 – 14 mm, Ø315: 66 pcs Bedpfx Ajwylavja Dedb Set 3 – 14 mm, Ø315: 50 pcs New – Ø320: 44 pcs • Rubber rings – total 93 pcs: Set 1 – 25 mm: 31 pcs 15 mm: 12 pcs Set 2 – 25 mm: 31 pcs 15 mm: 18 pcs Set 3 – 25 mm: 31 pcs 15 mm: 18 pcs • Spacers: Slitter knife spacers: 480 pcs Separator spacers: Metal: 252 pcs Non-metal: 369 pcs • Spare slitter shafts: 1 complete set General Information: Manufacturer: Winfos, Taiwan Year of manufacture: 2010 In operation since: 2017 The machine is fully operational and can be inspected in production. Available for dismantling at the beginning of 2026.

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Bjdpfov Twi Rex Aa Dsdb

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station Bdodpju Iucujfx Aa Deb - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: xxx, Shank slotting machine for attaching a cutting tip to screws. The machine is in first-class condition and can be used immediately. Bdedpfxsu Rblhj Aa Djb

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm Bedpognc H Djfx Aa Dodb strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1090, The TB6/SB MOD 140, manufactured by Giani F.lli L. & G. s.n.c. (Italy), is an industrial slitter machine designed for longitudinal cutting of film, paper and packaging materials. The machine features a robust construction and reliable cutting performance, making it suitable for continuous industrial operation. It is commonly used in converting, packaging and film processing industries where precise cutting and stable material handling are required. Bdodpfoyghn Iex Aa Dsb ⚙️ TECHNICAL PARAMETERS • Manufacturer: Giani F.lli L. & G. s.n.c. (Italy) • Machine type: Slitter / longitudinal cutting machine • Model: TB6/SB MOD 140 • Serial number: 1090 • Year of manufacture: 2007 • Certification: CE compliant • Application: film, paper and packaging materials

Condition: used, In this offer you purchase a used slitter rewinder ‘Neolt Electro Trim 150’ Object of sale: 1 x Neolt Electro Trim 150 with the following equipment: incl. underframe 150cm roll width possible electric from 2021 Bdsdpfx Ajwln I Toa Dsb Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, type of input current: three-phase, product width (max.): 1,600 mm, The machine is designed for slitting and rewinding of flexible materials such as plastic films, paper, Bjdsyy Rh Eepfx Aa Dodb laminates, adhesive tapes and foils. Technical details: - Working width: 1600 mm - Slitting system: razor blades / rotary knives - Materials: PE, PP, PET, PVC, paper, laminates - Input voltage: 400V / 3-phase

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Bdsdpfx Aaex Ez Umo Dsb Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Bdedjyx Uy Aspfx Aa Dsb Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter Bodpjyrz Raofx Aa Dsdb The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04090810, Equipment: type plate available, AutoTurret ABG Vectra+ slitter Ashe. Width 410mm. Slitting 25, 41, 76mm. Automatic roll ejection. Glueless. Good condition. Magnetic cylinders: 96, 99, 102, 104, 108, 110, 111, 114, 116, 120, 124, 130, 131, 135, 136, 138, 140, 141, 144, 147, 151, 154, 156, 167, 168, 180, 185 Bdedpfx Aswyvf Aea Dsb

Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: DFQ1300C3-2 high speed slitting machine, 1. Specification: Slitting Material: Plastic film (15µm–150µm), paper (30–400gsm) Maximum Web Width: 1,300 mm Minimum Slitting Width: 50 mm Mechanical Speed: 350 m/min Slitting Speed: 300 m/min (depending on material) Unwinding Diameter: Ø1,100 mm (shaftless type, includes 3” and 6” clamp adapters) Rewinding Diameter: 2 × Ø600 mm Rewinding Shaft: 3” differential slip air shaft or air shaft Main Motor: 7.5 kW AC servo motor Rewinding Motor: 2 × 5.5 kW AC servo motors Unwinding Tension: 200 Nm magnetic brake Waste Blower: 2.2 kW high-pressure blower Drive System: Synchronous belt and V-belt Guiding Roller: Ø100 × 1,750 mm, hard aluminum alloy (HV700) Mechanical Structure: Cast iron and steel plate Web Guiding: EPC (Edge Position Control) Main Control: PLC + touchscreen Total Power: Approx. 28.2 kW Overall Dimensions: 3,700 × 2,700 × 1,400 mm Weight: Approx. 4,500 kg Standard Equipment: Bjdpfx Ajyuwqzea Djdb - Shaftless unwinding unit with 3” and 6” chucks - Hydraulic lifting system - Unwind web clamping device (splicing table included) - Line and edge web-guiding system - Slitting section - Razor and rotary blade cutter system - Laser paper core positioning system - Double rewind unit with air shaft - Constant tension pressing structure with web pinching device - Trim removal system (trim blower) - Electrical components - MITSUBISHI brand PLC - YASKAWA brand drives - Touchscreen operation Optional: 1) Differential slip rewind air shaft: 2 pieces

Year of construction: 1996, condition: used, Technical details: • Working width: 400 mm • Max. speed: up to 150 m/min • 20 magnetic cylinders included • Die-cutting station with magnetic cylinders • Slitting unit Bsdjyub Siopfx Aa Dedb • Matrix waste removal • Rewinding unit for finished rolls • Suitable for self-adhesive label materials (paper and film)

Year of construction: 2024, condition: used, Working Width: 1350 mm Maximum Speed: 400 m/min Maximum Unwinder Roll Diameter: 1300 mm Unwinder Core Diameter: 76 mm Maximum Rewinder Roll Diameter: 1300 mm Rewinder Core Diameter: 76 mm Minimum Slitting Width: 25 mm Maximum Number of Knives: 30 Processed Material: Paper Material Weight: 50 – 200 g/m² Main Drive Motor: AC 3-phase motor – 30 kW Electrical Requirement: 400 V, 50/60 Hz, 3 Phase Electrical Power: 35 kVA Compressed Air Requirement: 6 – 7 bar Air Consumption: 200 NL/min Machine Configuration Unwinding Section • Unwinding station for rolls up to Ø 1300 mm • Pneumatic expanding shaft for 76 mm core • Pneumatic brake with measuring roller for web tension control • Hydraulic lift-in system for mother rolls • Motorized lateral adjustment of unwind stand Slitting Section • Knife system with 25 top knives and bottom knives • Knife positioning adjustable without spacers Rewinding Section • Rewinding station for rolls up to Ø 1300 mm • Pneumatic expanding shaft for 76 mm core • Pneumatic nip roller Bdsdsyt I A Eepfx Aa Djb • Hydraulic unloading of finished rolls • Safety guards with light barrier Control System PLC: Siemens SIMATIC DP ET 200 SP / CPU 1500 Operator Interface: Touch Panel 700 Comfort • Failure message display • Multi-language interface (DE / EN / FR / ES / RU) • Web tension control • Speed limitation adjustment • Meter counter • Hour counter • Pre-set meter counter with stop function • Diameter pre-setting with stop function • Speed control • Ethernet modem for remote diagnostics and maintenance

Condition: used, Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK in good working condition. Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK Baujahr / Year 1999 - Serial-No. 210271 Arbeitsgeschwindigkeit / Speed max. 550m/per Minute Arbeitsbreite / Working width max. 1650mm Schnittbreite min. 50mm bei Hülsen 70 & 76mm /  Cutting width min. 50mm  Cutting width 70 & 76mm Schnittbreite min. 200mm bei Hülsen 152mm /  Cutting width min. 200mm  Cutting width 152mm Zu verarbeitendes Material / Material to be processed: Kunststofffolien aus / plastic films made of: PE, PP, PA, PET, PVC, Papiere und Laminate Hartfolien / hard films ca. 10 - 250 µm Weichfolien / Soft films ca. 20 - 500 µm Aufwicklung / Rewinder Aufwickel-Druchmesser / Rewinder Diameter max. 610mm Aufwickelhülse / Winding Sleeve: Pappe, Kunststoff oder Metall / Cardboard, Plastic or Metal Innendurchmesser d. Hülse / Diameter inside 70mm, 76mm and 152mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bjdpfx Aoylw Disa Djdb